OTOMO - Wheel light installation instruction video

[@miltonwalker12]

Did you hav to do any cutting backing plate n what size wheel light 15 or 17

[@johnbrownlee7623]

WELL THATS GREAT, but what do you do, if the has no backing plates?

[@otomo8824]

Hello, if your cool car does not have backing plates/brake pads, make sure there are appropriate fixing screw positions, and then you can refer to the video for this installation method: kzbin.info/www/bejne/aIqvdKFthM-Do6s If not backing plates/brake pads and not have suitable fixing screw positions, your cool car will not be able to install wheel lights. Need to trouble you return the product to the Amazon warehouse. 📧 If you have any questions about the product, or don't know how to choose the size, you can send two measurement datas to our email: [e-mail] 😊We very much hope to bring you a good shopping experience and excellent customer service. And we promise to provide high-quality customer service and after-sales service for all our precious customers.

[@johnbrownlee7623]

@@otomo8824 HAVE, pads and rotors, DA, ...on my cool corvette, they did not put the backing plate on, on all of the Vettes.....SO, what I did, was build my own brackets...Yes it was a pain in the ass, but I got her done son...

[@enriquelopezchavez5458]

I’m confused I have a two sided wheel light set but the brackets aren’t already mounted onto the lights how do I put them on there?

[@candykisses3276]

What did you get 15 or 17 inch ??tryna get my dodge magnum done which inch would u recommend ??

[@otomo8824]

Hello, need to trouble you to measure of the and . For detailed measurement methods, please see video: kzbin.info/www/bejne/an2rnJaFpJyrbJY ⛭Then choose the wheel light kit suitable for you according to the size suggestion below. 🚗 11" wheel light kit is for: Rotor Brake Dia≤9", Rim Inner Edge Dia ≥ 15". 🚕 14" wheel light kit is for: Rotor Brake Dia≤11", Rim Inner Edge Dia ≥ 17". 🚙 15.5" wheel light kit is for: Rotor Brake Dia≤13", Rim Inner Edge Dia ≥ 19". 🚘 17" wheel light kit is for: Rotor Brake Dia≤15", Rim Inner Edge Dia ≥ 21". (These fixed size wheel light kit is fixed rings, need to choose according to 4 rims size.) 📧 If you have any questions about the product, or don't know how to choose the size, you can send two measurement datas to our email: [e-mail] 😊We very much hope to bring you a good shopping experience and excellent customer service. And we promise to provide high-quality customer service and after-sales service for all our precious customers.

[@kvngjaden2805]

Hey man got a question got wheel lights I’m confused on the brake/turn signal wire function. Could I wire it to the head lights or does it gotta be tail lights ?

[@rustedoutcummins]

You can do both 🤘

[@otomo8824]

Hello, we are sorry that we just saw your message now. The white brake wiring is connected to the positive pole of the car's brake light; the yellow and green turn signal wiring are connected to the positive pole of the car's left and right turn lights respectively. We promise to provide you with high-quality customer service and after-sales service. If you have any questions, you can contact us at any time via email: [e-mail]

[@stargirl_forlife]

Can you make a video on how to connect the wire because I'm lost...

[@otomo8824]

Sorry, we are currently unable to produce the video you require quickly. You can try reading the following text. 1. The AC fuse box is located on the lower left side of the steering column of the car. It is responsible for the circuit safety of the turn signals, window lifters, cigarette lighters, airbags, and electric seats. The other fuse box is located in the engine compartment. Open the car's In the engine compartment, you can see a fuse box on the right side of the engine compartment, which is responsible for the circuit safety of the glass water, car headlights, horns, ECU, and ABS. 2. The back of the AC fuse box cover will have instructions for the purpose of the fuse. You can refer to the instruction to find the corresponding turn signal and brake light fuses, and then draw power from the corresponding places. 3. The red and black wires on the control box are connected to the positive and negative poles of the AC fuse box/power supply; the white wire is connected to the positive pole of the brake light; the yellow and green wires are connected to the positive poles of the left and right turn signals of the car respectively. If the above content still does not solve the problem, please reply to this message or contact us at: [e-mail] We will definitely provide you with high-quality after-sales service. Thank you for your understanding.

[@valeriyaronnie]

The leds working fine when the cart is off. But when the car turns on, the leds keep blinking red. My garage can't figure out whats wrong. Because everyting works, turn signals etc. but when the car starts or makes an electrical connection, the leds keeps blinking red.

[@otomo8824]

Hello, we are sorry that we just saw your message now. Based on your description, we analyze that the wiring of the control box is incorrect, which leads to this situation. We will definitely solve all product problems for you and provide high-quality after-sales service. Please send your detailed order number and address to our email: [e-mail]

[@541systamatik541]

Hahahahahahahaha I sat through this whole video to waste my time. I only came for the wiring. Thanks.

[@aka-arohawihapi7076]

My wheels dont have that behind it, its all metal

[@Jackal_Blitz]

Man he mounted the rings off-center. They look so bad!

[@Edmoe100]

This does not show you how to connect the wires to have power to the ring lights, But it shows you where and how to connect the ring lights in how to run the wire.

[@otomo8824]

Yes, this video is mainly to show you the detailed installation method. Thanks for your valuable suggestion, we will update more videos of product effects.