Our New Ramp Truck Project is So Big We Couldn't Fit it on Our Trailer!

[@DennisMurphey]

That is my Dads Grain Truck, I drove corn and beans from the field to elevator. I am glad your saving the door Patina. My nephew Tyler told about the truck and sent me this link. What a hoot. If you want to know about Dad, the farm or the truck let me know. My Dad Joe was a very good guy, and a Cubs fan, He passed the year the Cubs won the World Series. OK Now i have to see the rest of the video. And There was an S added to Son when my younger brother was born Seemed it did not last. Dad made me pay $5 for 'and Son'. Dennis in Virginia

[@OldTimeRevival]

It's awesome to hear that history. I'm sure it brings back a lot of memories.

[@DennisMurphey]

@@OldTimeRevival there is more. In the ash tray on the dash. I went with Dad to get the bed on, a hydraulic lift. With an extra button along the bottom of the bed so you can could rise the bed more while watching the grain come out

[@andyn504]

He should donate one of the doors to you!

[@someguy4476]

Cool. I like it. Your buddy Jack seems like a cool dude too.

[@anthonyshelton6786]

old Bias plies and SPLIT ring wheels holy toledo, good on you guys fixing on their trailer, and that 57 looks very cool

[@wbball15]

Jacob, you're allowed 4 ft of overhang off the rear of your trailer before needing a permit.

[@jimcabezola3051]

I like the "Can Do!" in your videos. Against so many odds, you don't just give up and howl at the Moon. Mahalo for showing us your dreams and bringing us along on your adventures. Aloha!

[@SallysSpeedShop]

That’s the only way to get things done quite often haha It’s worked out so far!

[@jimcabezola3051]

@@SallysSpeedShop Yes, it has! Outstanding!

[@jeromezielinski8773]

E.W. 8200 means "Empty Weight " , Here in Illinois , they used to have this on trucks for how much , I can't remember , which .. either how much they can carry , How much it weighs empty or what roads and bridges they can be on safely with out ripping up the road or collapsing bridges.

[@OldTimeRevival]

Cool to know!

[@OtisENGINEuity]

God I'd love to have that extended cab Ford.. they are so hard to find.. Well, so long as it's 75 or older.. because California smog laws actually apply in Yuba County. Oh it's a 78.. well it'd be fine with a 97 7.3L Powerstroke swap because that wouldn't require to be smogged. That's like the 350 Olds Kevin just did last week, those are very appealing to me because they don't require smog.. who's to say you couldn't easily swap in a 6.6L Duramax with twin turbos and all the Gale Banks controllers and everything.. It's a factory diesel car, who cares if you have a different diesel in it? Though I'd be tempted to find a forged crank and rods and put a turbo or two on it as it is and find out if those 350's can make some power. I'm weird that way though, I like thinking up things no one else ever questions. (not that I'll ever have the money to do it) Yep, another damn LS.. LS stands for Lame Shit, people put them in everything from Acuras to Zephyrs just like Flowmasters and I'm 100% sick of them, especially with their propensity to break. Making power without smoke with a diesel is far more interesting than a LS swap to me.. especially when there's so many other cool GM engines out there for less money.. like I'm trying to talk Finnegan into getting a Kaufman Racing Equipment MR1 aluminum engine for his "Rubber Duck" Firebird and to ditch that bbc because they make a big power all aluminum Pontiac with upgraded Warp 9 heads for less than a BBC. (the Warp 9 heads split the valves to be EIEIEIEI like they should be keeping it from blowing out the valves, gaskets, or head at the center of the two cylinders that typically have two exhaust valves next to each other like every other GM engine besides the LS and the Rocket 350) That mill you saw at the end is a spline cutter for doing custom axle shafts. That looks like a Dana 60 rear.. personally I'd upgrade to an 80 or 90 with the amount of weight it's going to be seeing.. a 60 is fine for a 3/4 ton truck with mild towing, not so much for an all steel ramp bed plus a car on top plus junk in the bins.

[@rickchristner1722]

You are going to love a diesel

[@FordEra]

Great seeing Jack on here and the fords

[@SallysSpeedShop]

Jack is the man!

[@_BYC]

You got your money worth, but that C- Notch looks rough. Overall, very cool truck.

[@MNMoto]

Been sub'd since the first hornet vid. Good to see the growth, keep on posting great content. It is not about the "street cred" of the project, the right people with passion I watch doing what they enjoy. ❤

[@OldTimeRevival]

Thanks for hanging in there and thanks for watching. Much appreciated! Tim Davis

[@DesignEngineering]

Awesomeness!!! Excited to watch this project unfold!!

[@trentmoseley]

I LOVE the ramp truck and I'd also like to get a gooseneck trailer to haul with. My truck is gas though but it's geared nice.

[@leegoldeneagle9003]

Now that was fun thanks 👍👍👍👍😊

[@michaelmonday418]

Cool project. Can't wait to see what you do with it.

[@pacman73c1]

Great video I just found you. Hello from.Talking Rock.

[@OldTimeRevival]

Glad you enjoyed it. Thanks for watching. Tim Davis, Sally's Speed Shop

[@davidbell-mc7jw]

those are seats from a semi truck. the switches on the side are for raising and lowering the seat and it has lumbar support is what the other switches are for. the black knob on the arm rest raises and lowers the arm rest.

[@SallysSpeedShop]

Very cool! Not sure what we’re going to put in it

[@billsalzman]

Yaaaay new video!!!!! Come on little gremlin!!!

[@SallysSpeedShop]

🙌🏼🙌🏼🙌🏼

[@MaxNafeHorsemanship]

National makes seats for semis. That's an air ride seat with lumbar support etc. Runs off the air for the bags.

[@SallysSpeedShop]

That’s very cool! I may have to look into that

[@trentmoseley]

12 valve in that thing would be awesome

[@rambler19672000]

Love your videos. Like I said before the AMC ‘s are why I’m here lol. My cousin and I just drug home a 67 Rambler 440 2 door hardtop.

[@OldTimeRevival]

Thank you and thanks for watching. Tim Davis, Sally's Speed Shop

[@johnsarian_cu]

Some guys were probably watching all the way waiting for the catastrophe. LOL I had faith you'd avoid it!

[@SallysSpeedShop]

Luckily nothing too sketchy happened haha

[@Derf1313]

Heck of a rig, looks like it will be a kool addition to the shop! Not to mention a whole bunch of video content getting it sorted out lol!

[@SallysSpeedShop]

Most definitely! Thanks for watching!

[@brianatkins8217]

Nice. I got a C8000 ford cab over that I but a dovetail bed on and love it.

[@SallysSpeedShop]

Very cool!

[@shanewright6958]

What a great looking ramp track 👍👍

[@SallysSpeedShop]

We dig it!

[@bobmanzi7712]

That was some great stuff thanks. What a score on the truck Cannot wait to see the content on the rebuild. The javelin will look epic on the back of that rig.

[@SallysSpeedShop]

Agreed! I’m torn between leaving the patina or painting it to match the javelin

[@bobmanzi7712]

@@SallysSpeedShop if the javelin had patina I would leave the truck but since the javelin looks really nice I think I would make the truck look just as nice

[@OKHall]

Nice hauler. Cant wait to see it finished.

[@SallysSpeedShop]

Thank you! We dig it!

[@southerncharm2023]

Working with them low inches there Jacob, lol

[@OldTimeRevival]

😂

[@BillMulholland1]

That thing is bad ass! 👍

[@SallysSpeedShop]

Thank ya! We thought so too!

[@billsalzman]

Wow, what a cool rig!!

[@SallysSpeedShop]

We’re fans for sure!

[@DakotaSchultZ-l6z]

Caint wait for this will it run

[@SallysSpeedShop]

We have a wild plan for it!

[@jasonfikes9514]

✌️😁

[@davewoodmancy5124]

I drove through Farmer City Illinois just two days ago on Thursday. Not much more than a bump in the road

[@SallysSpeedShop]

That’s fascinating. I looked up the farm this thing came from and there’s a Murphy Lake there from where they excavated to build the overpass for the interstate haha

[@DennisMurphey]

It should be Murphey Lake!

[@Haps_q]

turbo diesel over turbo ls for the hauler.. You're the one that said that you need diesel in your life ;)

[@SallysSpeedShop]

Agreed! More on that coming soon!

[@farcasgarage3559]

I've looked and look and looked....what's the name of the last song that played as you left the cookie place? "Sems to me they dint get our ways....try to control what we say.....

[@OldTimeRevival]

Thanks for watching. Tim Davis, Sally's Speed Shop

[@OldTimeRevival]

kzbin.info/www/bejne/mau6cqCZep2jh5Ysi=To7SdYrbHplm5P5A

[@OldTimeRevival]

It won't let me post it but, on yt, first name Josh, last Shaw...Who We Are.

[@farcasgarage3559]

@OldTimeRevival thanks Tim

[@DaPenceman]

Meanwhile over on the Carco channel, check this out, we sold this cool ramp truck to this guy at a bargain price, and he shows up unprepared. With a trailer we have to repair and he keeps crawling all over our shop 😅

[@OldTimeRevival]

Good summary. 😂

[@SallysSpeedShop]

Accurate 😂😊

[@OldTimeRevival]

Those guys were super nice and accommodating.

[@jasontaylor7837]

Get hold of rick classic 👌 truck rescue he should have parts for it

[@SallysSpeedShop]

Who is that? I might need some parts!

[@jasontaylor7837]

His channel is classic truck rescue on you tube

[@Maximusfoisey]

haha I think those burnout marks in front of his house are from your dad

[@SallysSpeedShop]

Probably haha