Our Once Wrecked LT4 Swapped 1967 Camaro Is Finally Finished!!!

This thing turned out super insane!! After a long time of building, we are finally closing this build down. We are still going to be doing a bunch of testing however, so do not worry! Thanks For Watching!!!
DANG SAUCE 1/2 Gallon: hoffandpepper....
-GOONZQUAD NEW MERCH!!(Very Limited): goonzquad.com
-Instagram: / goonzquad
-Email: [e-mail]
-P.O. Box 37
Rossville,GA 30741

[@alexfoulks7509]

Thank you guys so much for fixing the issue before it blew up. Now get it professionally tuned!

[@LeeQuesada-CoTGaming]

I was wondering if you was talking about what i was thinking about... then I seen em put the line on... Thank GOD.

[@goonzquad]

Will get it tuned ASAP!

[@sicksierra1368]

@@goonzquad make sure you find a tuner in Texas they have nun but the best

[@isaiahwade1484]

@@goonzquad be really careful with those wheel spacers. That much power can break them. You should order black wheels for the back with the correct offset.

[@isaiahwade1484]

@@sicksierra1368 yeah Texas has some legends in the tuning business like Texas Speed and Lethal Performance. Tennessee has some good ones too. DBR HP does some really good work.

[@chevelle74us]

You boys did a great job. Restoring old cars is a whole different game. Very well done. Love the modern touches.

[@FnaAuto]

It’s literally like legos and there’s decade’s of information on the internet.

[@6996brandyl]

@@FnaAuto Plus they had a bunch of help off camera

[@matthood2878]

This is by far my favorite build it just shows that you guys can pretty much do anything you put your mind to it and figure it out all that wiring in the engine swap when you guys really don’t do it all the time pretty amazing!!!

[@Kujoe100]

This has by far been my favorite build that you guys have done. At my age, classics are my favorite. You made a classic a modern marvel. I'm looking forward to the completely finished product. Details are everything. Can't wait to see the finished product. Rock on gentlemen.

[@armandovega4597]

So amazing to see the Camaro almost finished. It’s looking better than I’ve ever imagined. I would definitely eliminate the spacers and actually get the wheels with the right offset. With the amount of tq you are putting it’s a possibility that those spacers can snap, not to mention the vibrations on the rear.

[@zachhamze9986]

Mercedes e63s

[@orated762]

WhistlinDiesel has tested this. Good hubcentric spacers aren't going to "snap" or vibrate.

[@T.S.T2014]

That blue and the grey wheels makes a great combination. The entire build is on point guys, keep it up.

[@rekrapish]

I also prefer the grey over the black , looks super good with the blue

[@mr6three]

A C-8 Vette might be a cool next project. i started watching you guys way back on black Z06. keep up the good work, guys!

[@mario55m]

I think you guys should get a BMW m4 has a new project build✌️

[@WheresTex]

I like the Vette idea, but I think maybe an older Vette would be cool. Loving the classic cars!

[@sic7camaro]

Hey guys get the ridetech 4 link set up Bolt on or weld on Another is the Detroit speed quadralink little more welding and cutting involved

[@johnjesus971]

Don't forget the rubber gasket for the windshield. Will clean it up a lot!

[@jimcannon1444]

DEFINITELY worth the wait!! I LOVE IT! My favorite build on the channel (and there were tons of builds to choose from). I bought my first Camaro in 1991, have been in love ever since! This completed build has my heart racing again!!! This is the Camaro that belongs in a "Legends" build series. Great work, guys!!!!!!! 🏆

[@coreyjacobs5688]

I would definitely go with the gunmetal color on the wheels. As for the 4 link, you should check out Hotchkiss or Detroit Speed. Also, if you do decide to put the bumpers on, you should go with chrome ones. Otherwise, great job, she’s pretty sharp. My favorite build of y’all’s yet.

[@murry001]

NOPE GO BLACK WHEELS :)

[@TenheadLife]

Black wheels are so played out. The back wheels look way better

[@austin4x]

Please keep this one. You have to keep a few so when all of this is over you've got a mobile trophy case and this one has got to be one that stays. It's so gorgeous and it represents such an important time in American muscle car culture.

[@MAKII724]

I’m so glad this build is done at last. It’s been a long run from these delays and how you tackle the “impossible” like seriously this is one of the huge accomplishments in the channel.

[@billy42300]

You guys had my respect from day one, but this 67 build knocked it out the park!!! Big up to you guys and pops. Thanks for the content. Praying for peace in Ukraine, God bless you and your family.

[@dfull3188]

You guys are very lucky to have a dad like pops who always working behind the scene

[@TiffCat]

what a brilliant and original comment that has definitely not been said 10,000 times on every single video

[@flinchfree]

LOVED watching this Camaro come together, so happy you stuck with it!

[@Avetho]

That half-gallon Dang Sauce container looking a bit like a motor oil jug is making me think of whether it would be cool or heresy if Cleetus did a science episode of whether it works in an engine like he did with gas and diesel. On the one hand it would be interesting to see, on the other hand Dang Sauce is for making any food instantly far better tasting and I wouldn't want to lose any so I'm rather conflicted :P

[@FlashBangMafia]

Dang Sauce fucking sucks. Quit trying to lick their boots 🤡

[@mikeshepard6393]

Yes I like the way u think 🤔.

[@MR-xd5rb]

Weird

[@MUCKFOOT399]

dang

[@042452]

Nope…tired of these Commercials.

[@Joannagmarie]

What an adventure this build has been thus far. Classic or Exotic, you guys build them all. It’s insane.

[@darrenswails]

@@Mike-qp8bv money is obviously no object to these guys

[@joseacuna3239]

You guys can tell how much work it has to be put into those restorations. I’m honestly blown away on all the things you guys did to that car to make it drivable…

[@shobhitmathur5686]

Nothing beats the charm and the clean lines of a classic car. Love it. Its really come a long way and no one could have done a better job.

[@RyanP_SRT]

Love the positive attitude and commitment to the videos and keeping us engaged and wanting to see more👍😎

[@isaiahwade1484]

You better be careful, with that much power, you can easily break those rear wheel adapter bolts. You need to just order wheels with the correct offset. And get rid of that hideous hood. It would look amazing with a 67 Camaro RS hood.

[@munchkin929]

Amen

[@shredBucketheadshred]

the hood is just a raised factory scool. you mustn't actually be around cars much huh

[@isaiahwade1484]

@@shredBucketheadshred first off, WTF is a scool? LMAO And so me thinking that a cowl/scoop that big doesn't look good, somehow says I'm not around cars that much, and somehow makes me not know that's what the factory hood looks like? I know exactly what a factory hood look like, and it looks better than what they have because the cowl is only around 1 inch tall. And I obviously know about cars, that's how I know what a 67 RS hood looks like, and it would look better with it being the dual vent style hood. I'm around cars (primarily muscle cars) all the time as half of my family has them and we work on them and enter car shows and meets a lot. Myself, I have a 1972 Torino with a 408 stroked 351W and a Kenne Bell blower and Holley Dominator EFI. Now go ahead and leave some more ridiculous and irrelevant comments.

[@shredBucketheadshred]

@@isaiahwade1484 its a typo and yea it does man that. and its obvious

[@isaiahwade1484]

@@shredBucketheadshred it's obvious you're a troll that just talks, talks, talks. Please explain with your divine wisdom just how I don't know about cars. That Camaro did NOT come with a factory hood with a 4 inch cowl. So that hood they have just being based on the factory hood is completely irrelevant. So come on, explain yourself.

[@robertthompson8706]

You guys should do a Ford Gt. Keep going with the super cars. I love seeing the cars I hardly see get fixed and I love your videos

[@claytonoliver7942]

Gotta be super careful stacking wheel spacers like that! Creates extra vibration and adds a point for failure

[@montanajoe9258]

Beautiful rear end and brakes. Ditch the wheel spacers and get wheels with proper backspace. With all that hp you will have issues with the spacers.

[@reysuayan121]

They should remove the small non-hubcentric spacer or get wheels with the correct offset. I still think the rear wheels are too big.

[@dating4564]

Wasting your time giving advise to this clown show. All they care about is sauce, money, and clicks. To dam lazy to google and order a wheel with the proper offset.

[@dating4564]

@@reysuayan121 Wasting your time with this train wreck. While they waste money ordering the wrong garbage they can't spend 5 mins on google ordering proper offset wheels.

[@tnolan3176]

Wheels will fail when they are spinning those rear tires doing burn outs ! Spin the centers right out of those wheels !

[@stoppy6192]

It's so nice to see that classic almost done. It's a long time coming. Great job guys

[@donald6345]

Looking great! I only would change the hood to an original one…. The fitting and the looks will be even better

[@fn6051]

We are old schoolers who have been watching ya'll from almost the beginning. We would love to see ya'll tackle a 1974 Ford Bronco with 5.0 Coyote Super-Charged motor. Congrats on the Dang Sauce super sized!!❤️

[@dmarn8258]

So happy to hear your going to respray it. Give the boys at 23rd Garage a proper task in making it smooth and dent free

[@coltonwhisenant5810]

I think an 87’ square body would be cool. Or an old C10. This old Camaro build has been by far my favorite because of how awesome it has turned out.

[@dylanduff9645]

Yes!!!! Square body with an LT5!!

[@caydencollins7849]

Same

[@wentzsworkshop715]

Love to see a 69-72 c10 build or even a k10 or k5 blazer build

[@laxbeach2381]

Well, they do have that old LS they took out of the Camaro. Could put it in a C10, or even put it in the Ranger.

[@coltonwhisenant5810]

@@laxbeach2381 that would be a cool build series

[@sm5970]

It looks really good. I just think that it really needs its chrome bumper and finishing pieces so that it has some trims eternally. Otherwise it will look like a big navy thing with no finish.

[@albinljungkvist939]

Get a stripe around the nose and chrome all the trim. if you chrome the front and rear bumper that would make the hole car look super good 👌🏻

[@frankl9605]

Needs to be paint all the window trims even the tail light trims 👍🏻 good job guys honestly my favorite 🚗 you tube Chanel

[@neilsp7105]

I remember when you guys first got that car. You guys did a wonderful job on it. I’m excited to see what your new build is going to be. I’m a car guy myself ,I love what you guys do to your vehicles it’s awesome. Keep up the great work.

[@franknbeans3651]

The Cal-Tracks and mono leaf spring (what you already have on the car) is a good system. It’s more than enough suspension for what you have in that car.

[@Mike-qp8bv]

I would leave that rear suspension alone. Once you dial them in they work fantastic. But in true fashion they will install some cheap ass four link, destroying that cars suspension and driveability.

[@franknbeans3651]

@@Mike-qp8bv 100% agree with you. We put that set up in my 69 camaro with a big block and it handled everything we could throw at it.

[@_Haris1904]

Watching the camaro build again cuz this car reminds me of how I got into cars. Can't wait to see you guys get back on it and complete this monster.

[@michaelcrowers6628]

I have followed a long time you desperately need a paint booth and a prep deck with a downdraft filter system. It can butt up against the building in the rear. or on the sides Make it long so that you can drive directly from the prep deck into the paint booth without bringing it outside. the paint booth can open to the exterior almost like a drive through. I know the struggle with prepping and paint it really needs its own designated area. I spent 18 years in multiple body shops the best ones kept the prepping and painting seperate from the mechanical side.

[@reubtube2463]

This guy knows what he’s talking about!!

[@Shortdraw01]

The silver wheels look nicer imo and the paint color has really grown on me!

[@Z1NJ1]

I'd find some white "Reverse Lights" and put them in the "3 little holes" under the tail lights. I believe a reverse light is mandatory in most states, I could be wrong though. Awesome build as always.

[@waltervonborstel848]

I love the 67 Camaro!!! My vote for the wheels is the gun metal grey!! The black are okay I just think the gun metal grey looks a ton better. But it’s your build y’all do what you guys like! My favorite classic car is the 66 Ford Galaxie they are IMO the best looking cars. I am biased as I grew up in one. There’s a junk yard in Minn. has a 7 liter 66 Galaxie convertible but it’s got no engine or tranny. Would be sweet to put a Godzilla 7.3 in it. It would be a total restoration because it is in pretty rough shape. I am taking probably needs new floor pans and maybe trunk pan also. Let me know it there’s any interest?

[@GurkenGeneral]

Would love to see a rebuild that your viewers could afford. What about the old pickup truck your pops is driving? It’s there, it’s been a reliable car for your whole family and it deserves it

[@Hneimeic]

I’d personally like so see an old school diesel truck or another truck build in general I love them videos !! Great work you guys

[@pedrorodrigueziii4859]

Imagine if our boys could find an SRT10 Ram!

[@WRLDPCENOW]

I COULD JUST IMAGINE HOW PROUD YOUR PARENTS ARE OF YOU GUYS. YOU ALL MUST HAVE SOME REALLY AWESOME PARENTS, BY THE LOOKS OF YOUR MORALS, ETHICS, AND DRIVE FOR WORKING SO DANG HARD.

[@matmul4850]

Stop shouting bro.

[@WRLDPCENOW]

@@matmul4850 CAPS IS NOT SHOUTING. THIS !! PUNCTUATION SYMBOL IS. DO YOU NEED MORE SCHOOLING.

[@schm1nty]

@@WRLDPCENOW idk sounds like you're shouting to me

[@WRLDPCENOW]

@@schm1nty REALLY, DO YOU NOT HAVE ANYTHING BETTER TO DO. CAPS IS NOT YELLING. THIS !! PUNCTUATION MARK IS. DID YA NOT LEARN THAT IN LIKE THE 2ND GRADE OR SO. MY CAPS USAGE DOES SEEM TO ANNOY THE CRACK HEADS THAT HAVE SENSITIVE HEARING 🤣🤣🤣🤣🤣😁😁

[@jamesharris4536]

actually I think the chrome bumpers front and rear would look really cool on that car give it that old school look

[@stevesamuel6603]

Another classic build guys please!!! especially if you guys can keep the original old engines used in classic cars that would be awesome and a change for the channel.

[@hector_nimrod]

Guys like i said before, put a rollcage and seatbelts on the Camaro. I love you guys, dont wanna see you guys hurt ever again

[@kleemanjad]

Yup add more strength to the chassis.

[@biketom5]

I agree 💯%. Safety for you guys is important.

[@curtishansen760]

This build has come a long way🎉

[@theguythatcouldfly]

Beautiful car! Excellent work! You built a custom car! Don't be shy about featuring a few more videos as you work out the kinks, and add some upgrades. Maybe take it to a car show or 2 next spring. It would be fun to see you guys do a Datsun Z, a 70's Land Rover, a 1980's F-150, an NSX, or a new Ranger, Maverick, or for the family views find a Caravan to customize.

[@frankleonard6570]

this by far is your nicest build! you should be real proud of giving life to such a beautifull creation! its a really nice car! 👌

[@shanegoodwin2623]

Congratulations guys im from Australia 🇦🇺 I’ve watched every episode and loved them all I love all your cars there awesome

[@talonmcmanus88]

Definitely need more classic cars! Don’t have to start as wrecks either. Would be sick to see you build a 60’s mustang or a C10 truck.

[@philtucker1224]

Oh please, not another 60s Mustang on KZbin! Can’t you American boys think of something else?

[@rayshutsa6690]

You guy's did a phenomenal job on the 67 Camaro. This car even back In the early 70's. This would have turned heads as it will now.

[@Amxracer]

Don’t forget to glue in the rear glass before you take it down the road ! 😅

[@hungryalien]

and fix the front windshield moulding as well hehe

[@maxmarx2]

They need to remove the windshield and properly prime both pinch-weld and glass otherwise who knows what would happen. Same thing with backglass

[@johnkeaton5010]

It looks amazing boys. I think the next new build should be a Chevy C10 pickup short bed. Food for thought!

[@tnolan3176]

I think they already have a project ! They had said something in a previous video about buying the next project already but didnt want to reveal it just yet !

[@johnkeaton5010]

@@tnolan3176 I know you're right but I would like to see their spin on an absolutely gorgeous truck ( when done correctly) would turn out.

[@Cartier_specialist]

Are you talking about a 1970 Chevrolet SWB? That I'd like to see.

[@johnkeaton5010]

@@Cartier_specialist absolutely!

[@donaldlittle6720]

Great build, looks Awesome keep up the great work that you do. Have a great day

[@damonwheeler7538]

Yeah, classics can cost a lot fast. I am starting a 68 Cougar that I found in a farmers field in 1988. Was my daily driver for a while, then it sat while i was in the military. Now watching you guys are getting me back to the point where I want to start working on it again, but I wont be able to go anywhere close to what you guys have done. Thanks for the motivation, and bringing Dang Sauce out, use it every day, even on Ramen. Also may want to see what Foose has done with some of the bumpers he has done on builds, he narrows them so they fit the body tightly.

[@Mr.clintontoney]

I would love to see you guys build and personalize an ultima RS. THAT WOULD BE EPIC !!

[@RomnysGonzalez]

WE DID IT BOYS!. THE VACUUM LINE IS ON!!.

[@dylanduff9645]

I almost can't believe all of pur comments were finally noticed!!

[@cree878]

Who remembers Billy not liking older cars 🤣 looks good

[@the_ghost2934]

you guys should build a holden vf commodore (chevy ss) it would be sick!!!!🔥🔥🔥🔥🔥

[@louisneill3384]

Awesome work! Would love to see your spin on an older style land cruiser!

[@LifesAnAdventure2232]

I was thinking the same thing! I've got a 100 series and would love to see them build the 100 or earlier

[@rotatingringbelt]

It would be sweet to find a gmc syclone or typhoon and put the goonzquad touch on it.

[@audidriver53]

Great idea but those things are extremely hard to find in decent condition. Unless you want to pay 20k+

[@pineconemedia2093]

Definitely go with a Detroit Speed 4-Link kit!

[@bikescarsandmore6156]

I've followed this build since day one, I love it, yall need more classic American rebuilds

[@bradleymetcalf6958]

Hands down best build yet boys.

[@jimhughes5255]

I like the headlights. It’s not a restoration build it’s a resto mod build and it’s distinguishes it that way.

[@stevenwiltse9611]

If your not putting the rear bumper back on use the holes to put back up lights in them. Takes work but it would look sick!

[@2H80vids]

Great lesson there, explaining how to open/close a car door - much appreciated.

[@offroadw460]

love to see a g wagon build

[@Alibaba22098]

I love that blue but fully black with those headlights would look amazing at night. Great build good job guys

[@sagnik8432]

Would look good with chrome or blacked out bumpers instead of body colour

[@mrc55la]

I think chrome both front and back would give it the old school look even with the new mod’s. One other issue is the hood scoop. Could be just me but I have never liked the type that’s on the car now, the same with a lower profile May look better.

[@hungryalien]

@@mrc55la if going to do chrome bumpers, they might need to chrome the window trims as well to go with the chrome side mirrors. yes on the ugly hood they have now.

[@leonardopassos6880]

It looks pretty sick guys… I would probably mach the hear wheels black as the front ones. Also double black strips and black spoiler and black windows.

[@CJLeTeff]

Hey guys do a refresh on Pop’s truck! Camaro is looking sweet! Awesome jobs guys! Now help Vtune finish his Mustang!

[@killer6shooter]

I would love to see another muscle car build

[@adinebarrett6803]

Get the original hood on!!! Please 🙏🏾

[@oangel-6491]

Id love to see a Cts-V Second Gen be rebuilt that would be great content It would be interesting seeing my dream car being built

[@skFriberg]

That front end just ain't it I'm afraid

[@clutchdan]

ong

[@brycenbellamy321]

You trippin lol it looks great

[@loogi_if]

Its their car anyway

[@clutchdan]

@@brycenbellamy321 the headlights ig are different but nah , it looks like car u see in gta 😂

[@999forever7]

Bro you be trippin that front end looks sick

[@andre-n2jdh]

The 4 link will be great for eliminating axle wrap. It’s basically blocking the rounded axles housing and stops the axle from twisting. The leafs can cause axle hop and wrap from worn or broken springs. You aren’t relying on the give and take of the springs. The 4 link will put that torque to the ground.

[@hebe1792]

Now that's a beauty. I hope you guys fix the black trim on the rear lights and windows. I think the door handles and side mirrors look good in chrome.

[@nickelder9519]

Would love to see another classic muscle car build with a goonsquad spin on it.... This Camaro is what got me watching this channel...... Or even build the custom truck body and chassis that was at the axel/drive shaft shop

[@Nn2872]

A big lifted truck. Like 18-22 inch lift, at least 44in tires. Thank you guys are awesome.

[@danbasilone3465]

I'm sure there are some details to be worked out, some adjustments to be made, but for now, congrats on the completion! You've transformed an old car into a new one with the latest technology! Please take care of yourself as the cold season is coming.

[@julianop.4241]

I like that you guys went with the auxbeam projector headlights, although they don't give a classic look, they produce a very good beam pattern for their price.

[@Slow_M440]

Never really comment I love your videos been watching since 2019 but I have to comment now u gotta paint the rims black on the Camaro It looks so good 🥰🔥🔥🔥 love you guys goonzquad on top

[@681vincent]

Been dying to try out the dang sauce!!! Need shipping to Singapore pleaseeeee

[@legendary-ck9pv]

Its become amazing from how it was and how its become super car 😍😍❤

[@thomasallen3818]

Looks great! If y’all do put the bumpers back on, you might try cutting and tucking them to give them a custom look.

[@stephenbradley5805]

Looks really good now it's finished👌, as for the 4 link buy cheap buy twice so go for a good 4 link set up 👍

[@olope5744]

Needs the front end accent stripes on it. As for the next build I think yall need to find a either an Aventador, Maserati MC20, or a McLaren 765LT

[@fsuforlife3643]

I think y’all should do like a big sema truck build, I know it’s out of y’all’s genre but I feel like that would be pretty cool to see y’all build one!

[@guillermogarcia6342]

So glad that you all didn't quit onthe 67 Camaro guys!!!

[@barrettskillman3047]

Black wheels look way cleaner against that blue color! Good stuff guys

[@user-xx4mw7jp1o]

The lights look super cool , LED lights are the way to go on these older cars . Shave the front bumper to bring it closer to the body and paint both front and back bumper black to make the rims and bumpers match .

[@randellbryant8832]

Definitely do the black 18’s all the way around it would fit the car better. But finally the car is all together and it’s beautiful 🤤😍

[@garryfraijo7229]

Niice suspension steering upgrades you needed it with all that power. Definitely the right move. Beautiful car

[@MrSonordrumr]

I think that's my favorite car you guys have done so far, would love to see more classic cars on your channel guys! God bless and take care guys!

[@timcmanns8321]

Chrome Front and rear bumpers will make it look good

[@ashutoshvats121]

Would love to see you build another Lamborghini like Aventador we all gona love that v12 sound 🔥🔥

[@justinyelverton]

Finish the other two before introducing a new one. I really liked the suspense of a new build after y’all finished one. Work on it till it’s done, couple vlog style during, and then a new one. Be dope to see a mk4 supra on the channel, definitely would be one to keep in the fleet.

[@alexduros917]

Dang son!! Glad you guys saw this one through - what a transformation!! As for recommendations, would love to see some AMG or BMW M in the shop. Perhaps an E63 AMG or an M5? Keep it up!!

[@roland5599]

definitely starts looking a lot better when it gets all put together!