Our Twin Turbo GODZILLA Powered Foxbody Just Made HUGE Horsepower!!! (With a Plastic Intake)

Thanks to Keeps for sponsoring this video! Head to keeps.com/cleetus to get a special offer.
We got McFlurry out to make some hits on the Dyno before we test him later this week... needless to say it's running awesome!!
Swap Meet 90 spots available (gates open 7am for sellers) event open to public 9am-3pm!
EVENT DETAILS HERE for the swap meet and open track night! tickets.thefoat.com/FreedomFa...
Check out our new T-Shirts LIVE NOW on: cleetusmcfarland.com
Our 2023 Sponsors:
www.holley.com
texas-speed.com
www.motionraceworks.com
www.nittotire.com
www.summitracing.com
heatwavevisual.com
Cleetus2 Channel - goo.gl/Ph2wyo
Holley's channel - / @placesholleypoops9094
**Social Media:
Instagram - goo.gl/LZvy5e
Facebook - goo.gl/gdwhh1

[@Fawnshell]

this channel wouldn't be the same without jackstand! glad he's getting some more channel time

[@EasyBakinX]

He’s got a lot he does himself as well. He competed in ls fest pretty much right after Bristol. It’s not that they aren’t giving him screen time, he’s a busy man.

[@SolidSnake-]

i dont know if its intentional or not but ive noticed cleet often cuts jackstand off mid sentence.

[@williamkenneth4111]

Sorta seems like cleeter shoves him outta the spotlight at times for sure

[@dannyht92]

These guys are definitely best friends. And they're both busy people doing their own things on the side.

[@markmontana4034]

Every time he does have screen time Cleetus just cuts him off constantly and doesn’t stfu and listen to what he has to say

[@trentbrown9461]

I feel like James is always ready to throw the nitrous at anything 😂

[@TheAnnoyingBoss]

Dont forget the ar15 was invented for shooting communists and socialists who seek to enslave the masses masqeurading their slavery as if it was saftey. Dont forget the 2nd amendment exists specifically for shooting corrupt government agents and officials when they go rouge against the people, which proves to happen more often than not

[@keeganpock864]

Guy keeps a wet shot kit in his pocket

[@asylumental]

That's why they call him jackstand, because his cars are always blown up and on jackstands 😂

[@jonwest138]

Riding his lawnmower and giving it the juice 😂

[@D_Trade]

Jackstands ability to call HP and Boost numbers is always a good time

[@Wockkkyyslushieee]

Jimbo always had a ear for that !!! Hanging out with Nate only fined tuned it

[@danielfmyers]

Should have just let James do the whole swap meet segment 😂

[@AdamGaron686]

Maybe half - not sure there’s enough nitrous 😂😂🎉🎉

[@40ozPres]

I'm a ford guy so I'm a hit biased, but the Lenco in a fox made this my favorite car of the fleet very quickly. And proving the 7.3 platform to the mass is a bonus

[@Degenerate124]

I mean it’s pretty much a big block LS so of course she’s gonna work.

[@austincassell4741]

​@justintime124 yes, Because it's a pushrod v8 it's chevy big block based engine 🤦‍♂️ LS heads bolt right onto a SBF from the 60s and everything lines up except the water jackets..... so really, is it an "ls big block?"

[@nycthreye]

@@austincassell4741 Nailed it, good ole recency bias

[@jasonkelly8451]

That Godzilla just sounds so damn good and rowdy AF love it!

[@xtr3m3fLx]

LOL poor butt hurt chevy fanners.

[@fuzzycuffs]

Plastic intake manifolds confirmed to be good for at least 1355hp

[@rjswas]

Assuming the computer crash on the run before didn't put the sensors out of whack.

[@jacobwalls452]

😮😮😮

[@garykarenmcgruther6386]

@@rjswas WOW, your definitely not a dyno operator or been on one very long.

[@rjswas]

@@garykarenmcgruther6386 Never said i was, im not an armchair mechanic either, just speculation, sorry if i offended you with my "MIGHT" be the issue speculation, i have worked on cars and built many but never really done Dyno stuff, but thanks for your "speculation" on the obvious, and in the end an insult to someone you don't know without just informing me that it's not possible like someone else did to another comment of the same type.

[@tonytrumble]

The face Garrett made when George told him it was 1355 horsepower was epic!! They should make a shirt out of that for sure!!

[@Cartier2Shiesty]

1355. you’re 3 off boss😂

[@MrMcbear]

Do a play on the RUN! IT'S GODZILLA!!!! with a pic of Mcflurry.

[@ben94cobra]

Cleet, you can speed up your data log reviewing by not using the DLV each time. Just stay in NSP and go to Logging -> Choose file for playback. Loads instantly and your NSP page views will all reflect the logged data. if you make changes to your map during the log playback, it'll push those changes back into your MAP when you go back into live mode.

[@ChristopherHallett]

He's so used to dealing with those shithouse Holley computers.

[@RickyVall3y]

Cleeter cutting off James sales pitch is crazyy 😂 2:31

[@RickyVall3y]

@@kraxeey that’s how you can tell they’re boys

[@scottmoore6131]

This is gonna turn into an annual freedom factory swap meet!

[@twisted2291]

Could be if he is offering Vendor spaces.

[@BradyMcCabe]

I would sign up! @@twisted2291

[@growlith6969]

That was the thing I was wondering. Can people show up to sell their junk too or what?

[@SoloTwo42]

@@twisted2291 Literally in the description that 90 spots are available for sellers.

[@Jjthekiller21]

@@twisted229190 spaces open for vendors

[@whitneyduncan6523]

james george and cleet is the absolute dream team their personalities go together great and its amazing to watch im not gonna lie imma be a lil salty if we lose one of them guys keep them happy cleeter bc they are helping make you bigger and bigger bro

[@DavidJohnson-hg1mz]

My all time favorite moment with this car was when Cleet saw the door and said McDonald’s might have a copyright issue with that… and James said you haven’t seen the back 😂

[@RammSnipe]

And here we still are and the sti kers are still there. McDs might like the publicity.

[@WorldWideWebb98]

Godzilla is such an appropriate name for that engine. Ford chose wisely

[@guitarhippie]

Just imagine how many the Ford engineers blew up when developing it. You just know they pushed the prototypes to the extreme before settling on a commercially viable design. So awesome

[@guitarhippie]

They definitely knew that someone like Cleetus would eventually get their hands on one and take it to the next level. I can't wait until he gets one of the new Chevy 632 crate engines that make 1,000 hp n/a straight out of the crate.

[@WorldWideWebb98]

@@guitarhippie The Chevy 632 and Cleetus will be the combination we never expected we needed

[@dustinharvey7394]

@@guitarhippie he already ready has had a blueprint 632 and currently has a Steve Morris big block in both KillaB and the one they just yanked out of twisted tea that is far better then the 632 chevy engine no real need for them to have one

[@guitarhippie]

@@dustinharvey7394 the blueprint 632 is based on the original big block style. Chevy made the "big block" famous, and it's ignorant to think they can't make a better 632 than their mimic. That 632 when it was blown made 1300hp I believe he said. And he blew it up.

[@plark7323]

Mcflurry is such a bad ass build for how simple it is.

[@AH-lw2bj]

Simple??? It's got a Ford Performance Godzilla motor, Twin Turboes, Lenco transmission, fully built rear end, stripped interior... Whatchu talking bout simple?? It's a $100,000 car

[@brandonvrt2285]

@@AH-lw2bjit’s not a 100k car. That’s a 50k car all day

[@baby-sharkgto4902]

@@brandonvrt2285 I think the real question is; is a car *this* built really to be considered a simple build 🤔

[@AH-lw2bj]

@@brandonvrt2285 gtfo of here... The motor alone is over $10k, not counting all the labour to wire it, plumb it, install it, tune it... Transmission is about $20k, rear end assembly, and suspension is about $10k... It's about $50k in parts, plus you gotta buy the car and install everything... It's easily $100k

[@brandonvrt2285]

@@baby-sharkgto4902 I’d say so. In their fleet of cars this is a very simple car

[@tnort101]

Jackstand Jimmy is a National treasure!!!! He can wonder around my shop any time he wants

[@russellmcbrayer5]

“Here you go, this one isn’t even plugged in” love George’s quick wit 🤣🤣

[@SethSpeed]

Can’t wait for ruby to be back

[@Ryan-719]

Same

[@chrisreed7640]

She been gone too long!!!!

[@RogueKing86]

Sixes for sure

[@Ole_CornPop]

Pete Harrels over there being real good and doing stuffs and as soon as he's done doing stuff Leroy will real good and Ruby will be Texas Speeding and performing it up.

[@burntheb888]

@@RogueKing86is there any corrvette chaisis with small block running 6s?

[@derickstclair1346]

Wife has been in labor for 8 hours today hopefully my boy comes today so we can watch the new video together

[@SaturnsGlass]

Congrats!!

[@derickstclair1346]

The exact minute he posted this video her water broke thanks for the blessings bud

[@JD2571]

I normally do not comment on your videos.but I always enjoy them. Today is special. Any car guy knows Steve Magnante of Motortrends Junkyard Gold and his now KZbin channel "Junk Yard crawl . Also Uncle Tony's garage is sending well wishes. Please pray for a speedy recovery! 🙏 God Bless!

[@bmorg7244]

That was brave pull that much boost...without petting the dyno marlin first!

[@extremecheddarswityomom]

1100 ft lbs of torques is wild. Mcflurry is a beast. Such a sexy badass car.

[@Cartier2Shiesty]

especially for a damn fox body

[@rickybobby4017]

It's a 7.3 liter 445 cubic inches of awesomeness it's gonna have torque lol

[@extremecheddarswityomom]

@@rickybobby4017 thats a fact. I dont see bbc putting out torque numbers that are close to hp like that.

[@blawsonbl]

I kinda wondered why ol cleet wasn't at LS fest but I remembered he's on the ol coyote hunt now.... LMAO 🤣

[@davidjessee7701]

Yeah I saw Jimmy and JH and Derek and Dr tunemall … no Cleeter no LS George at the LSFest!!! 1 hour away from my home

[@blawsonbl]

​@@davidjessee7701awesome guys all around!

[@corymcaughey7024]

Pretty much the only KZbin channel that i don't skip through the advertisements

[@kylertippy4787]

Thank you so much for the content. It’s been a stressful week and this channel helps relieve some of that stress I love all that cleet and crew do I can’t wait to watch this channel for another 8 years to come

[@Apollobink]

It’s great to see James here , love watching him on doctortunes channel. He’s an amazing character to have and he’s been here since the start!

[@SNELLERIZED]

Definitely not since the start.

[@xtr3m3fLx]

Dudes a serious drag racer. I've gained so much knowledge just listening to him talk about his craft.

[@sjv6598]

It was just the giraffe and coop at the start. James didn’t come along until much later when they got the shop with Jeremy Fontano.

[@theKashConnoisseur]

Commenting to boost since a bot stole this comment and reposted it using a thirst-trap profile pic and channel name. Always remember, girls don't exist on the internet, and always report bots.

[@slayo710]

Love the mcflurry content. So glad you guys do something for the ford fans too. Quality videos, always.

[@l8rn3rds]

shit man every video cleetus seems more and more jazzed about the fords in the fleet than any other car lmao seems like the ford fans are in-shop now haha

[@Blaquer17]

​@@l8rn3rdsEver since they stopped doing the science segment with the 4.6 mod motor, they've been doing the Ford stuff right. LS platform is legit but you can tell by how they react to the Coyote and Godzilla motors that technology has considerably improved engine performance.

[@The66RedDog]

Love the Mcflurry content. Keep it coming!!

[@jeremyhancock2332]

Awesome seeing the mixture of power plants across the channel. I have seen the growth of the ford love over the last year!! You guys are amazing

[@aproudamerican2692]

*The Mystery Machine* should be yard art at the Freedom Factor. So fans can take photos in front of.

[@chadallen7914]

The mystery machine is no more it was crushed

[@extremecheddarswityomom]

Na. Couldnt care any less about that thing.

[@notsofresh8563]

They dropped it from a helicopter onto twisted-t at b̶r̶i̶s̶t̶o̶l̶ freedom factory. Missed twisted...that car wont die. Mysterymachine is a pancake.

[@rickybailey7123]

They dropped it at the FF !!!

[@extremecheddarswityomom]

@@notsofresh8563 they didnt do it at bristol. You need your eyes checked.

[@michaelsaccomen8136]

Ol McFlurry was a stang EiEi O and in that stang was a Godzilla motor and two turbos 😂😂😂😂😂 couldn’t help myself

[@cj4ebay]

I love these classic McFarland dyno videos, always cool to see the guys get excited.

[@justinrupert7233]

I absolutely love this build and it just might be my favorite on the channel so far. "Simple" build, mostly reliable and consistent. I also enjoy the fact that its not an LS. As awesome as the LS platforms are, its nice to see something different.

[@wizza2315]

Agreed💯💯

[@RGHTBrainDesignDrive]

All y'all need to do is map out dome pressure vs. RPM on the closed loop duty table and it'll end up being an upward climb from the 30psi region (where it starts to currently taper down), and gently ramp it up. For drag racing, it'll make more sense to have that 14psi dome ramp to 17psi dome by redline which will carry power out past 6600 RPM with ease and wake the turbos up. Easy tuning fix.

[@denisohbrien]

or just get a proper boost controller thatll target your desired boost. stuffs been around since the 90's

[@RGHTBrainDesignDrive]

@@denisohbrien Haltech's boost control strategies are endless. It's just setup and tuned wrong for the application. Not a big deal. I'd have it sorted out within an hour to dial in specific boost ramps for their needs on the potentiometer dial.

[@ChristopherHallett]

@@denisohbrienthe ECU they're using HAS a proper boost controller in it. They just don't know shit about Haltech because they've been using those terrible Holley computers for so long. Tuning Fork would have every car in the fleet running perfectly and making huge power in a matter of a few days if they flew him over and put a Haltech in all the cars.

[@RGHTBrainDesignDrive]

@@ChristopherHallett I'm essentially offering to do the same thing as I'm a professional engine calibrator for almost every modern aftermarket ECU on the market. The idea would be to sit down with the boys and teach them how to use what they've got AFTER I completed it and that way when it comes to race day, they're consistent and can make adjustments on the fly. Just depends on what Garrett decides is best for content creation. People love to watch mistakes/failures on KZbin, plain and simple.

[@mealsonwheels4970]

Im surprised McFlurry hasn't twisted into a pretzel by now.. that thing is ROWDY.

[@Ole_CornPop]

It's my just what Fox bodies do.

[@dustyc324]

it's got a full cage, no? Full cage, no bolt to the unibody. all the power is through the new frame (cage) I'm sure it was built right if it's certified to run the times they are doing.

[@twisted2291]

When Ty built the cage for this car. He over built it just in case.

[@kariannestudeman1909]

It would then be McPretzel! 🙂

[@laska907]

I’m surprised the wife is not putting her foot down to him dynoing things with literally NO PROTECTION. No helmet, no fire suit, *wearing shorts and a T-shirt* driving a 1300 hp literal bomb on the dyno. Also *NOT EVEN STRAPPED IN* has anyone else watched the fuel tech guy dyno something? Now that’s a man who cares about his safety and living to the next day for his family.

[@matthewtracy8744]

McFlurry is sooo my favorite in your stable! Lol that godzilla is such a monster!!!!

[@timgibson6242]

Garret you sir are a genius. the content you produce is very good,your crew of guys are top notch.I tip my hat to you and your forward thinking of technology and ability to show others the way.

[@extremecheddarswityomom]

Would like to see neighbor, mcflurry, the f150, and the raptor r out at holley ford fest whenever the date for that is.

[@danielmunson6131]

Watching the power ripple through the body panels is amazing. Maybe a slow mo of that would be something to see. It starts in the front and as it comes on it travels back.

[@ZDreadLock]

i was wondering if is power or vibration bom dyno, u know these things shake up petty good at low speed

[@danielmunson6131]

@@ZDreadLock That could be possible. It was just pretty neat thats all.

[@caption0bvious693]

Hell yeah brother! Only KZbin channel I check for new videos every single day without fail.

[@MrDieselcumminspower]

There's a cold front coming.. sounds like knowledge from a pilot!! 🚁🛬

[@billmadison2032]

Seems like the Chevy guys loving Ford power. Welcome to the dark side 100% Cleetus

[@neilreid2298]

As a lifelong Mopar guy; I gotta say I'm quite impressed with the Godzilla engine. Ford got that one right for sure.

[@billmadison2032]

@@neilreid2298 kind of. we'll see what happens with the head gasket problems most mod motors have in between cylinders.

[@camarowland4]

I grew up a chevy guy with my dad and we always said we only raced chevy because it's cheap and easy to make decent hp. Otherwise we always got whooped by equally built Ford stuff. Always had the respect for what they can do, but never had the wallet.

[@billmadison2032]

@@camarowland4 I've been a Ford guy since I can remember

[@Crack_Roach]

To see it hit 1300 is absolutely insane

[@rjswas]

True, but i am a little sceptical though, due to the computer crashing at the end of the run before that, it could have put things out of whack sensor wise

[@Cartier2Shiesty]

@@rjswaslol nah brother, the sensor wouldn’t be thrown off because of the computer crashing. guarantee it. i’ve ran over 200 dyno pulls for myself and other people and when it crashes, it never messed things up. it was spot on, you can tell by the way the torque was right.

[@rjswas]

@@Cartier2Shiesty Cool, it was just a curiosity more than anything, been around and built cars most my life, but not so much the Dyno stuff, so i wasn't sure if the sudden crash of the system would have caused an issue or not, thanks for the clarification on that mate.

[@Cartier2Shiesty]

@@rjswas of course man, it’s intelligent to assume such a thing. but im almost 100% sure that the accuracy of the dyno numbers wouldn’t have been thrown off because of the computer crashing. since it’s directly mechanically spinning from the wheels & they have data logs from the tune, it’s almost impossible (i’d say) for the numbers not to be very accurate

[@rjswas]

@@Cartier2Shiesty Yes, that makes total sense now i think about it.

[@martyparsons8395]

McFlurry is one of favorites! Gotta love the old Foxzillia!

[@Daniel58racer]

As always amazing videos, great work all of you.

[@chriswaters788]

It would be really cool so see a board of all the cars power numbers on the dyno

[@deraldo313]

That would be pretty sick. And employees/friends could come by, set a Dyno run and put their name and car up on the board

[@Big_Fe11a]

That would be very cool

[@chriswaters788]

@@deraldo313 that’s what I’m saying everyone’s car could be up there and it would pretty easy to make

[@iansharkey1521]

Great idea!

[@cfhfan2000]

Cleet Thanks for everything you do to keep us entertained! Sometimes your videos are all that gets me through a day.

[@DSB1234567890]

C&C, swap meet, and track night sounds like a perfect combo!

[@Sleeperdude]

Man I wish you were closer I would totally go to the swap meet

[@dannyht92]

Love this crew man. That shop is a man's dream.

[@user-od9iz9cv1w]

Seems like just yesterday it was Cleeter and Jackstand at the old shop going nuts when they hit 700hp. Now they crack off 1k, 1.3k, 2k like its nothing. Amazing the numbers these cars are putting out.

[@derpataur1162]

Hot damn, the only McAnything with a working McFlurry machine. Lovin' the McFlurry content

[@dylansmith3022]

Friggin love this channel keeps me stoked for the week

[@TriggahXTV]

boy that f150 is moving

[@kb9oak749]

That's a lot of horse torques!

[@LostandRefound]

George's excitement is always the best.

[@Buddybryan3]

Cars and Coffee sounds like a good time!

[@briannelson8373]

That long runner OEM truck intake is the limiter on the RPM potential. She'd be making more up top with a shorter runner intake, and you could lose that inconvenient upward facing throttle body.

[@MiGujack3]

Can't be mad at the little guy, it's held 1300hp

[@Avetho]

@@MiGujack3 True, that

[@shane-o499]

Can’t wait to meet you guys! I don’t miss a video 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

[@RyTrapp0]

While I dig seeing how far this thing will go with all these factory parts - but, man, she's BEGGING for an aftermarket short runner intake! Ol' girl needs to be making power AT LEAST to 7500! Can't wait to see where it goes from here, one of the coolest combos over! Leave it to Cleeter to actually come up with a unique Fox body drag car lol.

[@mallardhunterhunter8588]

Got to like Cleetus! He's not afraid to break some stuff!😊

[@connorevans4246]

mcflurry is the damn coolest car of the fleet!

[@naturalmagick333]

9:13

[@brennan.bell1]

intro is gold! love y’all’s videos never disappoints!

[@Blacksheep_88]

Cars and coffee Open track night Swap meet All great ideas to get people out to the FF and keep things fresh. Nice job Cleetus & Crew. Wish I could drop by for a pic in October, but can't make the timeline. Sad day.

[@SKATETOSLAYER]

Insane, love the foxbody.

[@MISTERR0BOT0]

Should hold an annual auto swap meet at the freedom factory

[@jeremiahlinton9582]

Loving the Ford content!!!

[@huntergray28]

Cleetus has some serious creative ways to do his “ads”. Very convincing.

[@stevenraymer6682]

Hell yeah brother Mc Flurry is a bad dude. Thanks guys for some bad ass content. WOW!!!!!!

[@erictidwell1174]

James's face from the fumes .. priceless 😂😂

[@James-bu6qg]

Everyone’s eyes were bloodshot by the end of the video 😂

[@Ole_CornPop]

Ford Performance power, you cant hate on it or you'll be seeing many bumpers in the future.

[@jdmmike7225]

Except most Foxbodies you see at the track or at no preps now are LS powered. I'd say it's at least a 4-1 ratio every time I'm at the track or the street.

[@kylebeach2316]

​@@jdmmike7225 because the LS is cheaper vs the coyote and godzilla

[@jdmmike7225]

@@kylebeach2316 Oh no doubt. And more readily available.

[@Ole_CornPop]

@jdmmike7225 correct, but I'm talking about the engine, not necessarily the car. If you have the money to build it always go with Ford. Plus like the LS and their parts being able yo be used in all their platforms they are modular but Ford takes it an extra step. There is a reason Koenigsegg uses the 4.6L for his base power plant in many vehicles.

[@robertboten4944]

Again your fabrication guy does a great job, he actually finishes projects really quick.

[@StudioBeast7575]

Wow what a unit! I can't wait to see what it will run on the track.

[@TheAdam36830]

I love me some McFlurry!

[@extremecheddarswityomom]

Same. Its a unit

[@joshuamartin9187]

Hell Yeah Brother!! Always a good day when Cleetus uploads!!

[@knottypine7935]

Anyone else see the baby seal peaking around the hoop next to Mr. McFarland's head? I can't unsee it now. 🤣♥️🇺🇲

[@longboardalways]

I really hope all these dudes are happy behind the scenes. I really hope no one leaves the current crew. This is the best squad.

[@Dysfucktional]

That lanko trans is probably my favorite part about McFlurry!! 🤤

[@xtr3m3fLx]

*Lenco and yes, it's a badass piece of equipment for sure!

[@Wangan280z]

Swap meet is such a good idea, you guys got some good stuff

[@Deerfield5]

I wish I could be there like if they had spare roll cages for my uncle's race truck S10 cus the Ohio valley raceway won't let you race anymore without a roll cage if you do under 10 seconds pass building one ur self is expensive it's has the 406 small block naturally aspirated but it's set up for nitrous but he don't have any nitrous bottles

[@chaseb99924]

Ready for the update on the Blue mare

[@Baddog6873]

Did y'all see the rubber piling up behind the dyno ?😮 Wow! 1355 hp worth of rubber!

[@benjaminfrohns]

The tires also had a fat wrinkle in them. Wild machine

[@bamsauce2312]

I wanna see Vaughn Gittin in the fox at some point

[@NYB800]

Swapmeets at the Freedom Factory are a great idea. Yours is gonna be busy. Hopefully you open to other sellers and vendors in the future

[@carverac]

And a McFarland Racing Ebay channel

[@NYB800]

@@carverac I'm sure people would bid like crazy I hope he does it. Fans would love to buy his stuff and would also probably generate good revenue and keep the cleetus machine going past youtube

[@SMor42]

There’s a link for sellers to buy a space in the event description. Free to attend and buy, $50 space fee to sell.

[@SirensC3]

Bad ass! That engines days are numbered.

[@sethdaniel9194]

I love this car! Everything about the setup 🤙🏼🔥

[@rikrocket4618]

Hell yeah brother watching from the uk respect to you and your team cleeter👌🍻🍺💪

[@brandaneakright6082]

The Godzilla is no joke just like the coyote motors, more ford content especially the f150.

[@SPHYNX99752]

That engine sound is fantabulous! ❤😂

[@carsonheiney723]

I like that the red Chevy is hooked to the merch trailer. It’s a clean truck. I’ve always driven fords so I’m sort of loyal, but I think that red combo is like a married couple. Till death do they part. 🙏🏻

[@jamesworkman686]

Ford power ftw 🇺🇲💪

[@billystroup1153]

You should start a car show and swap meet there a few times a month on the weekend. There's a big car shows swap meet in Pomona California. It'd be kind of cool if you had something like that at the freedom Factory

[@devinroundy983]

Jesus!!! At 14:06 the fender and door were shaking like crazy!!! Thats some power!!!

[@bluntly8760]

Man we need a year of freedom, 365 videos everyday for a year.

[@buckinright4206]

Hell yeah brother 🇺🇲🦅

[@paullane7489]

Love the Godzilla content!!! 👍🇺🇸👍🇺🇸👍🇺🇸

[@Facchini98]

finally some racing i really love the drag racing videos the best

[@iitznottimmy3358]

Literally the only channel i actually watch the sponsors, always entertaining

[@terrynicewonger5434]

I’m impressed that it’s making 1300 plus on stock components

[@nickpopelka]

Not so sure the internals are anymore

[@bhagedorn84]

They have a lot of aftermarket stuff inside that engine now

[@Clutch_Kick187]

That engine is far from stock.. all internals are changed out.. stock intake is about it..

[@terrynicewonger5434]

@@Clutch_Kick187 I did not realize that so it’s everything but built lol

[@25Neo]

This thing will be a monster with a new intake and a water to air ic which is what I’m guessing they’ll go for, 1300hp on a hot pipe into a plastic intake is crazy 😂

[@Mikebike68]

George’s enthusiasm made my day 🙌🏼 14:17

[@stephenlegrone7047]

Cars and Coffee at the Freedom Factory is HUGEE!! Glad to see the progress bud.