Overclocking My E RIDE PRO SS with The EBMX X-9000

[@mrctuned2844]

I'm not an extreme overclocker or an e-bike enthusiast... but winners tend to continue doing winning things, and I'm here for the passion you have. Love the channel Vince, it's just no BS real content.

[@AllAboutKingpin]

@@mrctuned2844 Thank you!

[@razvanmarius2924]

i'm not even into overclocking much but i still watch your videos they are interesting

[@N0N0111]

I am a Sur Ronster watcher, I remember that KINGPIN had these cool e-bikes laying around in his lab. I search for his channel, to my surprise he is banging out video's on this channel! VERY COOL!!!

[@AllAboutKingpin]

@@N0N0111 Kick ass! I’ve watched him too :)

[@TTM1895]

I don't have an e-bike but I find the content fascinating. The only note I would make on this video is the audio for the music. It's jarring to have some and then cut off unexpectedly

[@AllAboutKingpin]

We have been toning it down last few videos, I agree we went a little crazy there haha :D.

[@crank_FPV]

Bro i love your vids for the bikes, office/garage looks dope af

[@luminatrixfanfiction]

Man I gotta see that in action. Cool bike dude.

[@Trap444k]

Love to garage set up🔥🔥🔥🔥

[@Kniffel101]

The bike looks so sick! =O I think it'd be interesting if you could one day make a video on maintenance, mainly how you go about cleaning etc. =)

[@406mill]

Could see the torque at the end there! Love it :)

[@burn1gotbeats]

Cool video and nice shop 🔧🔥🫡💯

[@OzzyInSpace]

Was only a matter of time before the branching out began... lol And I'm here for ALL of it! Thanks KP!

[@cyberghost1337]

Enjoy the ride homez!

[@mdz_0151]

Hey Vince! You’re running out of room with all these bikes dude! Love the direction the channel is going bro

[@ericthedesigner]

Love your videos! Been aware of you for a while, Love your format. Thanks for not yelling at the camera like almost all the other video makers out there! See you understand how modern mics and technology works.!

[@AllAboutKingpin]

TY!

[@ruikazane5123]

Now this is something I can relate to somehow, stretching out electric motors on RC cars and mini 4WD cars. Rewinding the armature for more speed, forcing LiPo on what would otherwise be NiCd/NiMH ESCs, maybe cracking it open and mod the thing...the worst that could happen is it blows (there is a fuse anyway) or goes...until it don't because the stock drive gears on a TT-02 chassis is plastic! Atleast nowadays you won't really have to do those things anymore.

[@AdderallXE]

Perfectly customized "KP-Bike"

[@xDevscom_EE]

Next one should be painted blue with a gradient to white, and some NOS bottles. Wouldn't that look sick? :)

[@AllAboutKingpin]

@@xDevscom_EEMaybe for a mad engineer?? :)

[@xDevscom_EE]

@@AllAboutKingpin Don't know who that might be?

[@spaznos2000]

Cant wait to see it rip! You got me thinking I need a few EBikes... lol

[@Pro4TLZZ]

Nice work

[@UbergamR447]

great video, big like :)

[@espi8997]

Yeah, but where do we connect the 12vhpwr cable....? this is all really strange! (lol) Glad to see you back on track on the channel.

[@AllAboutKingpin]

@@espi8997 haha

[@MrREDSTAR20]

KP bikes that would be awesome gold and black themed with your logo on the side in gold

[@vincentbukowki]

Sick love your videos

[@threadripper979]

LN2 that thing!

[@mdz_0151]

You should definitely do a collaboration with one of the big bike companies one day. Would be great to see a KingPin e-bike

[@77Brainfreeze]

Hey Vince do you know whats just as cool as E-Bikes? Safety classes, get you some. When you blew on that de-burred bar I cringed so bad. You don't want metal shavings in your eyes. Please wear some glasses. Other wise great video, loving the content.

[@mromutt]

I wonder if he has thought about building from scratch. Just starting with a bare frame then adding every single part with exactly what he wants/likes best. Would be a really cool series. It probably actually would be way cheaper too with the import fees and trouble getting the bikes. Could even probably get a custom frame fabricated in country cheap than importing :) or at least close enough to make it worth it. I would love watching a ground up build especially with experimenting.

[@AllAboutKingpin]

@@mromutt Definitely have thought about getting a custom frame and subframe designed exactly how i want it..maybe more. Still doing field study…

[@jmazoso]

You should bring it over and do the Red Bull Rampage

[@pedrofrade1183]

hey KP, great to see you pumping out more content! At the end there when you were giving throttle to the motor, why was it rotating reverse? I know nothing about e-bikes 😅

[@AllAboutKingpin]

Have to wait for the sequel to find out :P. Love that you watched it all the way thru! Cheers.

[@The_Noticer.]

@@AllAboutKingpin Hall Effect sensor? :P

[@Jin-Li]

@@AllAboutKingpin Do you know the Admitjet Armor E bikes are they any good?

[@AllAboutKingpin]

@@Jin-Li i have one here :). I will build it next. It looks good and i just got the electronic throttle for it

[@Jin-Li]

@@AllAboutKingpin nice i ordered one last week i am curious how good it is i got the 24kw version supermoto

[@The_Noticer.]

I bought an electric moped myself but suffice it to say, as an engineer, its left me wanting. Already found a replacement motorcontroller and going to be installing that soon too. Only thing I'm currently looking at is what maximum discharge current the battery can handle, no specsheet on the battery or online, so have to wait for the manuf to reply back.. So much more fun than messing around with an ICE though. Do you have recommendations for aftermarket discs and calipers for mopeds?

[@AllAboutKingpin]

@@The_Noticer. Love it! Tons of fun for sure right? For mopeds…hmm..not sure. I just got some heavier EMoto brakes for this bike from Lewis finally, but they are all mtb/emoto.

[@Sherman1862]

Were you able to use the stock e ride pro harness, or did you go with the eEBMX9000 one that they provided? Thanks! : )

[@digibrat]

Can't wait to see you ride this monstrosity ;-) it's gunna be faaaast as F%$@

[@Lukas_Schaefer]

hello wow that is a nice workshop :D I am also thinking of buying the e ride pro :) you seem tall. How tall are you? and how you think the ergonimics will fit me ? I am 6 foot 1. I guess the riser bars and stem are something to look for. thanks

[@Sherman1862]

After watching your Video I might just have the confidence to install that EBMX 9000 myself as I'm thinking of upgrading my Eride Pro to one.. Is it easy to dial in the power for low-speed torque, trail riding and steep hills where you want the rear end to hook up and not spin? sounds like you think it was worth it? Thank you! Awesome content!!

[@AllAboutKingpin]

Cool! It is not so hard actually to install and yes it is tunable on starting torque curve as well as many other power related settings and later if you upgrade to CHI or similar 400A+ discharge battery, it will be able to go to a much higher level.

[@Sherman1862]

@@AllAboutKingpin Thank you! Put a 21 inch Warp 9 front wheel on it today with Dunlop MX35f knobby.. Love how it raised the front end and rolls over obstacles, tracks well... Tomorrow going to put 16 inch Wap 9 rear with 60 tooth sprocket... Dunlop Recon Knobby I think. Then front fork and shock I think. It might have enough power for me stock.. Burt if not, EBMX 9000 Controller is in my future~! : ) Mery Christmas!!!

[@Tiqant]

Was you bash guard a really tight fit mine was supper tight hitting on my motor wires.

[@AllAboutKingpin]

Yes, tight fit and also right up against the motor mounting bolts.

[@thermal868]

Hey Vince where did you get that rimmer for bars ? I would like to order one too.

[@AllAboutKingpin]

www.amazon.com/TRUSCO-Reamer-Stainless-Steel-Bronze/dp/B002A5OJN2 Cheers man.

[@SuspiciousPixels]

Do you only ride in the day? I thought that headlight would have served a purpose if night time riding or for road safety legislations where a head and tail light must be fitted.

[@AllAboutKingpin]

Yah only ride at the daytime, so I removed it. Otherwise its actually a nice light and it came with a switch which just sounds normal lol, but surron actually does not have. The light on surron just stays on with + ignition.

[@Fincher123]

Are the new Maguras coming for this Bike?

[@AllAboutKingpin]

@@Fincher123 Lewistech EP6 with 220mm rotors

[@Fincher123]

@@AllAboutKingpin Oh wow! Nice Brakes!

[@Cam.Klingon]

what is the actual difference this makes? better range or power, or what?

[@AllAboutKingpin]

@@Cam.Klingon It increases the torque and power significantly. The stock controller is limited, but the 72v battery on eride pro can handle a more powerful controller.

[@Cam.Klingon]

@@AllAboutKingpin Do you happen to have before and after data on the performace, runtime, peak speeds, etc?

[@AllAboutKingpin]

@@Cam.Klingonstock controller just stops at 12kw. This one goes to 15kw and the torque ramp is insane using the same stock eride pro battery. The difference is DRAMATIC. Its not about top speed, the sprocket and max discharge on the battery will determine that. This controller drastically increases the torque mostly. I ride it in the next video and I won’t lie, it took some getting used to :)

[@Cam.Klingon]

@@AllAboutKingpin nice, looking forward to the next video. Hope you have a nice weekend!

[@thananchaisereerat4736]

If he overclock something he is gonna get world record like a 3090

[@deanlonagan1475]

6:18..You Tubes first OC'd screw removal...the screw traced a path through the air identical to a KP EVGA 3090s thermal graph...