OVERHAUL TOYOTA 4A F ENGINE

[@martinhernandez628]

I love these engines so plain and simple

[@Engineerboy100]

Man I gotta tell ya, I learn something new every time I watch this video, it helps me do better on my videos and it helps me on my overhauls too. Great job, can't thank you enough!

[@anotherdayanotherdollar4039]

Do I loosen only one bearing pass by pass then move onto the next

[@hoobaguy4311]

26:39 the fellow on the left is named Junichiro Honda. He ended up becoming some vp of service or something similar. My grandfather was a manufacturing engineer and worked directly with him in the late 90s. I had dinner with the 2 of them when I was 11 or 12.

[@alansmilealot]

Where were you living at that time and where are you now?

[@hoobaguy4311]

@@alansmilealot I was in the United states then and I'm still here. At that time I lived in Virginia but my grandfather worked in Japan. A bunch of them were going on a business tour of the east coast looking to set up some corporate entity there in addition to TMS in California. I was visiting my father (parents were divorced) in new York. Dad got a call from the old man and said to come to the city (about a 45 minute drive) and have dinner and meet business friends. I was excited because I had a hard on for all the Toyota sports cars and thought I might be able to see one. I was a stupid kid and had no idea about anything lol. We met them at Balthazar's. I think there was 5 or 6 of them including Junichiro and my grandfather. I think my grandfather was the only one who spoke English because he has to translate everything. It was interesting but boring for me. Anyway, that's it. They never opened the east coast office as far as I know.

[@alansmilealot]

@@hoobaguy4311 such a great experience to have. I see u have a mr2 in your picture, do you have that one?

[@hoobaguy4311]

@@alansmilealot Yes I have that. It's a 1986 model with some TRD parts from the dealership. I'm the second owner. My grandfather was the first. I also have a Camry and a rav4 that my wife drives. I guess we're pretty brand loyal. I also had a mark 3 supra a few years back but I sold it to make room.

[@GaryDelgado]

@@hoobaguy4311 That mr2 is the kind of car you keep forever. Do you call it "Grandpa's car"? That's the nickname I would give it :) Cheers

[@whofarted9376]

I wish I had a torque wrench that looked like a samurai sword.

[@Engineerboy100]

Great video, I rebuild these engines all the time, I love it and they are very high quality engines! thanks for posting

[@Primer9]

do you actually come across and work on oldschool toyota motors?

[@pandukawb]

I came to this from your video!

[@godyladera1872]

Clint Hightower iiii

[@abdoukadriabdouide5336]

Clint Hightower validated what you was saying thanks

[@cliffordgmassoudy9711]

Clint Hightower powet. Power stering.

[@abdoukadriabdouide5336]

I will use this video to rebuild in engine so I can avoid some mistakes this is what I have been looking for a long time thanks good learning experience video

[@Engineerboy100]

Excellent video, love the detail of the oil clearance checks, good job and thank you. You covered some of the more technical details that I skip in my videos. Well Done!

[@eristanyag8913]

2e cylinder head asembly

[@drivewaymarvels311]

Awesome video thank you!

[@Skydmig]

Came for the info, stayed for the music

[@livingstonemusi6716]

wooow,those tools. sijui kama zinapatikana Africa.only at Toyota service centres

[@SamuelPhi]

This video is spot on! ♥️

[@CrashRebootL3]

cool, thanks 4 sharing.

[@angelhernandez5188]

Excelente video

[@WinstonSmith1997]

This video is great. I have built the 4A GE DOHC engine. I wish I had seen this long ago...

[@st184rc]

Is it bad I could watch these Toyota videos all day?

[@teguhnugroho1328]

great video

[@alexanderdemontfort3022]

2:38 When you misspell 'before' but it'll cost too much to change the powerpoint slide in the 90s to bother correcting

[@ericohman]

Today it costs barely nothing to correct mistakes in digital newspaper headlines etc, still no one bother to correct 🤣

[@cbh148]

I wonder if Toyota made an overhaul video for the 22RE or 2JZ, or any videos for those engines in particular. I get the impression that they just did this overhaul video for engines in general, with the 4AF selected as an example due to its simplicity. I have a '94 Xtracab pickup DLX (22RE, 4x4, 5 speed W56) and really enjoy OEM publications/media related to it.

[@janojuoma95]

Love this anime! Did they ever make a sequel?

[@gravissens3852]

Хорошая машина Carolla E100. Даже спустя 26 лет лучше автоваза. И двгателя A и E серии отличные.

[@olexvol9249]

Так и есть. Поддержу ваш пост.

[@nasrahmed6236]

Great explanation thanks alot

[@user-in9zj8qo2k]

Very good

[@SUPERNVA-gr4sr]

So much info ...love it

[@jonnysg1708]

nice bro👍👍👍

[@yheltvchannel9008]

I luv this vedio plss one by one of parts to assimble of part plss tnx

[@gsr2envy]

Dam where did you find this rare vintage video. Must have been on VHS. Lol. Nice video. Now it will be preserved here on you tube for life. Put some more up. I know you probably have a lot.

[@pauliancu1368]

Good luck getting this level of attention to detail from your "independent" shop

[@cbh148]

Good luck getting this level of attention from your OEM dealership.

[@user-pi2vc8sm2l]

I like it 🎉

[@fresnoslaps-oy9wn]

I have the same motor im going to rebulid thank you so much for this

[@alansmilealot]

Hey did you rebuild your yet? I know mines could use it down the line if not now

[@fresnoslaps-oy9wn]

Yea i did i went all out and repainted it.if u have tiktok check it out its my bass ride but some videos i show the motor bassrolla559

[@alansmilealot]

@@fresnoslaps-oy9wn I checked it out. I need to do my sound system too, I have all the parts. Time has been really catching me and the weather

[@ziaaziz4484]

Good over haual ring piston setting is best in engine no back compretion

[@victorkelvin5156]

Hii video unajifunza ufundi bila kwenda darasani love from🇹🇿🇹🇿

[@nishamedawatta4486]

I love my 4e

[@chirstianbenn4831]

My car also has those engines to

[@johnfloyd2551]

When Nintendo lets Toyota borrow Mario to be the host of their instructional videos

[@shoominati23]

Do a 4AGE yeah!

[@hoobaguy4311]

There bottom end is the same. There heads are a little different because the head on the ag was made by Yamaha. Same process though.

[@josephsipanje4505]

These engine durable it can run for a test of time

[@ihabgerges4273]

Toyota the best car ever

[@hananbajji5693]

Ihab Gerges ز

[@hananbajji5693]

دمممنزوتتتاا

[@noobgamershub]

Thanks , I wonder why you stop uploading videos, I hope you will be back

[@Tatit_Widyartono]

Tell me, why there are 2 pick up coil connected on series to detect crankshaft in the ignition distributor...?

[@TheRyadrian]

+Rudolf carl i hope you can help. When I'm cruising at say 50km (30miles) or really any speed, when i lift my foot off the gas suddenly or even slowly it causes the motor to jerk once after like half a second and when foot goes back on it jerks but pretty much straight away when foot goes back on gas?? cheers

[@kiyoponnn]

check the clutch and transmission

[@enockmakhathini]

Hi, I just need to know what is the correct NM when tightening 10mm cylinder head bolts on Toyota Corolla 1.6GL 16V 4AF engine(1991 model) using a torque wrench?

[@datadavis]

Welcome in modern world of TOYOTA!

[@gunnarkarlhalldorsson92]

You icelandic ?

[@datadavis]

@@gunnarkarlhalldorsson92 no not even remotely. i know an icelandic guy, does that count?

[@gunnarkarlhalldorsson92]

No. But your name look very icelandic.

[@datadavis]

@@gunnarkarlhalldorsson92 ah, well i guess some of us went there to colonize, although most of my ancestors became Normands

[@anton_c8gur]

planning to overhaul my other car even though its still working fine just to clean every part and replace worn gaskets. guess not good idea

[@Dirkmez]

What year engine is this for? I ask because the 4A-FE manual never mentions the torque to yield method . It just says to torque the head-bolts to 610 kg-cm.

[@user-jp8dq5cg1n]

1988

[@vhinez01]

do you have video for toyota 2e engne?

[@melliaputri2923]

Murid pak ismoyo:)

[@viccudiamat9420]

where is the 4k video? 😂

[@DANNYN224]

Are the 4af and 4afe heads the same also if the intake manifold bolt holes are the same i want to put a 4afe first gen head to a 4af engine block i want to convert my 88 corolla carb to efi any help would be appreciated

[@gundism]

let me know how that goes I'm actually looking at doing the exact opposite to one of those motors to make it into a for a f because I don't want to go through the pain of changing it from carburetion to fuel injection

[@cristianhc4484]

Hilux 2.8 (3L) ???

[@NoName-ef6go]

its corolla machine!

[@artekbalbawang1123]

does general overhauling will increase engine power and performance sir?? like replacing the crankshaft/camshaft/cylinder head with new ones except the block.

[@alansmilealot]

Artek Balbawang overhauling may restore lost power if the engine was worn enough.

[@user-ok3dt1zx3f]

kg-m1#kg-cm100.ครับ

[@muhammadfirdaus8012]

Classic af

[@rankbreaker8379]

Its look like really old video

[@pului9661]

What type of engine oil they used after the overhaul?

[@joelaparicio7046]

the same as the manufacturer in the manual recommends

[@ralphcristerquimno4199]

Is this engine 4af Is Interference?

[@slimjim8736]

Can someone please explain to me the use and purpose of the service bolt on the camshaft

[@dougohboy5190]

its a sprung dual gear the bolt holds the outer gear in place for removal, it stops cam back lash...

[@ednalopez2473]

6:27 timing belt

[@user-jp8dq5cg1n]

What size of filer gaje?

[@user-jp8dq5cg1n]

How to set tapat?

[@simonburns1055]

How many engines are in a car? lol

[@cabdifataahhassan2914]

i want learning macanical

[@user-kv1ry7cl9n]

610kg_cmเท่ากับกี่นิวตันเมตรใครช่วยหน่อย

[@didntpassananan6569]

เสน่ห์ จิตรจอง อย่างงี้ต้องใช้ ตารางแปลงหน่วย ไม่ก็ผมเคยเหนโปรแกรมแปลงหน่วย

[@angelhernandez5188]

si no fuera mucho pedir pasarlo en español

[@edwinbaloyi1]

anyone knows where I can get repair manuals this old

[@timothykeith1367]

Online download?

[@jmmalimba]

Haynes

[@user-jr5gj8kd8c]

What are Sims

[@ilkkak3065]

What the heck you have done If your 4afe needs overhaul... Driven 1 million on it?

[@Videotredrs]

Water coins dameg

[@scampers6609]

y am i watching this

[@Arz2003]

scampers because once in your life you owned a toyota

[@teemum.9023]

Looks 1993. Eurodance music videos were like that. In reality, nobody cares for your Toyota engine. As soon as your mudguards get rusted through, you are expected to buy another car. It makes sense only so far, as you don´t fix everything. Fixing something is not economical, but fixing everything makes sense. Even so, the horrendous draconian Toyota dealerships will not touch your money, you see, they want you to maintain the value of the car, or buy a new car, which will not be electric. This video was meant for 1993 customers, who give Toyota money for engine maintenance. I did an engine overhaul of the E2 Engine at a Private firm, 1600 €.

[@DarkKnight-qy1oc]

Anyone Donate me a 5AFE engine?

[@user-jp8dq5cg1n]

What size of filer gaje?