Overvolting Power Tools!

Рет қаралды 103,712

Cskirt

Күн бұрын

Пікірлер: 229

@jagobabarron5501 3 ай бұрын

I was expecting those angle grinder discs to fail and cause mayhem

@Frietpan 3 ай бұрын

i watched this with safety glasses on

@casemodder89 3 ай бұрын

i watched the grinder squinting like i always tend to do 😅

@MrCoolOfficialYT 3 ай бұрын

@@casemodder89 do you expect the blade just throwingn out of your device intno yor face

@dingo-gorditas 2 ай бұрын

@@MrCoolOfficialYT a man who squints at angle grinders is a fool on all days except one

@amogusenjoyer 2 ай бұрын

@MrCoolOfficialYT you literally wear safety glasses in your profile pic :^)

@Arlock41 3 ай бұрын

Those angle grinders made me really anxious.

@Geoffr524 3 ай бұрын

Haven't had any accidents myself, BUT I keep thinking of it as ANKLE Grinder, Because angle sounds like ankle (yikes).

@conordugan3305 Ай бұрын

I chuckled when the rev meter started creeping away😂😂😂

@chrisbailey7384 Ай бұрын

I can see why. Paranoid of it shredding apart like they did with CD's sending shrapnel flying everywhere. This is a metal disc we're talking about. It is much more deadly than a plastic CD!

@a_coolfurri 3 ай бұрын

here’s me watching motors die on a Thursday night with nothing else to do 😂

@saifanibnesabbir4943 3 ай бұрын

same how

@GalbreathSQuin 2 ай бұрын

Literally me right now.

@NexusGamerYT-16 2 күн бұрын

𝙍𝙞𝙜𝙝𝙩 𝙣𝙤𝙬 𝙞𝙩'𝙨 𝙏𝙝𝙪𝙧𝙨𝙙𝙖𝙮 𝙓𝘿 𝙝𝙚𝙧𝙚 𝙄 𝙖𝙢 𝙬𝙖𝙩𝙘𝙝𝙞𝙣𝙜 𝙞𝙩 𝙡𝙤𝙡😆😂

@curtchase3730 3 ай бұрын

The Biltema "dremel" tool DID make it's speced top speed....At 430 volts! LOL.

@sashasmail-h6c 3 ай бұрын

there was something not right about tha one. something dragging probably the bearings

@Scambaiter101 3 ай бұрын

It was 420 volts so 🌿

@njdotson 2 ай бұрын

I thought the reader just looped around whenever it hit its top amount. Like it would actually be 130000 rpm

@TheOfficialDorianelevator 3 ай бұрын

i want to see this with induction motors & a VFD, and incrementing the frequency until they burn up, that would be insanely funny.

@Cskirt 3 ай бұрын

Yeah that's on my to-do list, but it looks like I have to build my own VFD... Or do you have any suggestion on a suitable pre-built one?

@jooch_exe 3 ай бұрын

@@Cskirt They do exist, Zuked has them on Aliexpress. But only 2.2kw.

@TheTwister3000 3 ай бұрын

I've tried this but the electromagnetic field collapses around 3 a 4 times the frequency, so above like 160hz the motor only spins down

@ВладимирПопов-ж6ъ 3 ай бұрын

I did this expierement. Small 4 pole motor. Nominal speed is 1500 rpm on 50 hz. With vfd on 220 hz and 7000 rpm, torque so low. Rpm go down becouse motor cant spin its own blower

@ВладимирПопов-ж6ъ 3 ай бұрын

Vfd cand produce so high voltage need for this frequency. For 87 hz need 380v insteed 220 for 50. And how voltage need for 200hz and same torque?))))

@0123-v1o 2 ай бұрын

1:25 The 1.9 PD TDI in the work van on a cold winter morning..

@samsimington5563 3 ай бұрын

The cutting wheels seem to have a much better tolerance beyond their ranges than the grinders 😂

@riggsvsoliver 2 ай бұрын

This is wildly satisfying and cool to watch what happens at such absurd levels

@NordicNordic-h9d Ай бұрын

Your pfp sexy :3

@deathx605 2 ай бұрын

Man seeing those grinder discs spin like that made me have flashbacks of when one exploded on me

@ARockyRock 3 ай бұрын

I knew exactly what to expect with the steel "brush" on that impact but still gagged when I heard that startup

@kerimkstati 3 ай бұрын

230mm grinder accelerated to a speed of ~650 km/h ☠️🌚

@DJ-Lee_S 3 ай бұрын

Holy moly that impact gave me welders flash😂

@LoganHester-1489 2 ай бұрын

Same

@amogusenjoyer 2 ай бұрын

Lesson learnt: use steel brushes if you are overvolting your brushed mother. They lasted longer, just beware of the molten steel flying everywhere. :^)

@JimmyBiffle 3 ай бұрын

Must have been an expensive video to make 😶

@Cskirt 3 ай бұрын

All my videos are expensive 😅, this wasn't too bad, mostly old used corded tools no one wants

@kraəb 3 ай бұрын

@@CskirtAre you from scandinavia? I recognized the Biltema logo :o

@VIPPotato 3 ай бұрын

@@kraəb it literally says Sweden when you click on the channel description.

@kraəb 3 ай бұрын

@@VIPPotato Oh, well i didn't see that. Thanks!

@mikeg3529 3 ай бұрын

In the day and age of lithium and brushless tools, you can often find corded tools in the trash or at the flea market for a couple bucks per lol.

@NotTJFlamezz Ай бұрын

1:50 THIS PART SOUNDS LIKE A CAR AND I LOVE IT

@JakubDemeter-k8m 16 күн бұрын

impact wrench was traveling to the future for a moment

@Glumacubarley 2 ай бұрын

7:19 V8 POWER BABY Awesome video! Subscribed

@rycat5ESS 3 ай бұрын

Getting into Photonicinduction territory, I see.

@TakeApartLab 2 ай бұрын

I wish photonicinduction was still active 😢

@kevshS Ай бұрын

The black & Decker sounded like one of the old original series startrek warp drives starting up.

@maxhemenway 2 ай бұрын

1:30 Starting Up

@evi1dav3 2 ай бұрын

4:09 make a wish! Happy birthday to you! 😅

@MarkMeadows90 3 ай бұрын

When you were testing out the Black and Decker and DeWalt angle grinders, I was expecting them to surpass their exceeded limits, and they sure did.

@amogusenjoyer 2 ай бұрын

That DeWalt was especially impressive wow.

@kaden-sd6vb Ай бұрын

Free advertisement right there

@kangaroo0177 2 ай бұрын

Need to do it again but with brushless power tools

@thelonelyperson6150 Ай бұрын

Thank you for using your electricity bill just for us to see this kool experiment

@tescoshortage 3 ай бұрын

6:19 I’ve seen car engines fail less violently than that angle grinder. Holy fuck

@BotvacProductions469 2 ай бұрын

bro took "playing with electricity" to a whole new level

@crazyfurnaceguy1229 3 ай бұрын

These power tools are universal motor can run at DC and burnout way more powerful! I recommand try this next time!

@Nao-bh5dj Ай бұрын

Ahh, asmr to my ears🥰

@conordugan3305 Ай бұрын

Liked, subbed, and lifetime follower before watching. This is home.

@evergreatest7644 Ай бұрын

I would have loved to see the hammers of the impact wrench after destroying the motors! Surely they have taken a lot of damage too!

@rictorn0 Ай бұрын

5:00 so this is what my friend should've done to get that rusty exhaust bolt off 😂

@petarkukolj 2 ай бұрын

this is giving me anxiety, yet I still watch it

@uslanmazalperen 3 ай бұрын

Thank God, Finally the Video I Wanted Came. I Do These Kinds of Experiments All the Time. I Like Burning Small Engines. Where Did You Get the 400-500 Volt Supply? I'm Waiting for More Videos Like This

@Cskirt 3 ай бұрын

I bought it used, 3-phase variable transformer with overdrive

@crandonborth 2 ай бұрын

Just FYI that grinder wheel was going 226 MPH 🤯

@RennieAsh 2 ай бұрын

That's fine, battlebots are allowed up to 250mph tip speeds

@chrisbrasher6177 Ай бұрын

Oh jeeeeeeeeeezus

@Not-TheOne 2 ай бұрын

Photonicinduction would be so proud :D

@Nintendo3D5 2 ай бұрын

If he'll be ever back

@graphick-t4e 3 ай бұрын

The impact wrench became a jackhammer 😂

@nicnadu0515 2 ай бұрын

Pneumatic tools can do that type of rpm all day long 😎

@ATK_J.Y.S_I.N.D_Offical 3 ай бұрын

Awesome! Keep up the good work! 😊

@stevenvanheel3932 3 ай бұрын

Well that settles it- I’m upgrading all of my corded tools to steel brushes

@Amir_UberEatsss 2 ай бұрын

this guy's neighbors must love him

@WebflingerJoe 2 ай бұрын

443V to fail that old school saw, old tools were incredible lol

@CHDCHD-bp5vb Ай бұрын

Happy new years

@CHDCHD-bp5vb Ай бұрын

2025

@MANDINGOBlackPanther-lo1gm 3 ай бұрын

Nihayet gelebildin😍 uzun zamandır video çekmiyordu İnşallah en kısa sürede kanalında yeni videolarda görmüş oluruz Sevgilerimle❤ sana iletiyorum

@zachsteiner 3 ай бұрын

Good god that’s some serious voltage

@Seba-l2d 3 ай бұрын

Good vídeo!!!🎉

@danieljohnson8957 3 ай бұрын

I put my face shield on watching this at 4:34

@bobclarke5913 3 күн бұрын

Huh, I could smell that first one

@aestheticcruise8807 23 күн бұрын

The last one sounds like a jet engine starting up

@Visvangmeneer 3 ай бұрын

3:20 holy shii that needs an epeleptic warning😂

@test-rj2vl 2 ай бұрын

Missed opportunity to hit those grinders with ammer.

@rootbrian4815 25 күн бұрын

I guess some of the RPM's only mention what you attach, not what the motor is actually capable of spinning at given the proper voltage. Some operate just fine at 300 volts, others struggle and die after the 250 volt mark and end in fire. :D

@KLSYFY 2 ай бұрын

The flux capacitor was going strong with these tools... They'll wonder where all the power tools came from back in 1955.

@mariamari3996 3 ай бұрын

The motor:💥🥵☠️

@frommarkham424 3 ай бұрын

Awesome video

@mrcrungle326 2 ай бұрын

bro the angle grinders caused me anxiety and i wasn't even remotely close to them

@jeffreyskidmore8423 2 ай бұрын

Imagine drilling materials at 30.000rpm

@Nintendo3D5 2 ай бұрын

You'll probably drill a concrete in like 1 second

@chrisbrasher6177 Ай бұрын

Yep, now I want to see someone actually do it.

@frommarkham424 3 ай бұрын

1:36 started sounding like a diesel engine or something like that

@tony__stank71 3 ай бұрын

😂😂

@The_oopybloopy 3 ай бұрын

That’s true, it did

@Flyingcat33679 3 ай бұрын

2 stroke lawnmower

@markissboi3583 2 ай бұрын

The motors with lights out @@ be cool

@smittyjones8755 2 ай бұрын

That circular saw looked like it hit 88 mph!

@mica7191 3 ай бұрын

What power company you got there? Mine got my TV, speakers, PC PSU, washing machine and water heater shot after releasing three-phase current

@hozinwate 2 ай бұрын

Next *Makita Mitre Saw Ls1040*

@ukaszrugaa104 2 ай бұрын

Biltema 💪🏻💪🏻😂😂😂

@Thespectrum08 24 күн бұрын

how about one of those kids cars that kids can drive. how fast can it go with high voltage.

@Nintendo3D5 3 ай бұрын

Rotary tool: **says 35k rpm** Also rotary tool: **barely can handle the 35k rpm**

@RennieAsh 2 ай бұрын

It made one last attempt and hit 35k before popping. That's how they rated it lol

@Nintendo3D5 2 ай бұрын

@RennieAsh No wonder my CD says 25k rpm

@victortesladinamico5925 3 ай бұрын

5:20 thanks ❤❤❤

@Nintendo3D5 2 ай бұрын

@twiztedmowers2 2 ай бұрын

I can smell the burnt motors from here.

@IyanSanders 3 ай бұрын

5:43 sounds like a supercharger

@obtrunco 3 ай бұрын

I was scared that the circular saw was going to fly out.

@fruitydudexD Ай бұрын

Hold on but I need to know if the impact tightened the bolt! :(

@Cskirt Ай бұрын

It stripped the threads, can't get it out anymore 😭

@andrasidansjon313 Ай бұрын

This cats must be the masters of stare, especially the yellow one. He's the cutest. 😢

@kaden-sd6vb Ай бұрын

The dewalt grinder desperately trying to keep going even as it occasionally spat out bits of itself

@Niki_chihuahua-e9e 9 күн бұрын

1:29 Engine motor start

@J.P_Sullivan 3 ай бұрын

Just a idea: try overvolting cheap kitchen ware😂 like blenders and dough machine's or water cookers😮

@Nintendo3D5 2 ай бұрын

He did tho

@kj4ilk 3 ай бұрын

6:02 the jet engine is starting up

@mikef1570 Ай бұрын

After 400v all tools are welders. 😮

@victortesladinamico5925 3 ай бұрын

6:28 very thanks!!

@Niki_chihuahua-e9e 9 күн бұрын

3:57 Holy shi- fire

@nikofabic5721 3 ай бұрын

What kind of power supply are you using to blow these things up!?

@RennieAsh 2 ай бұрын

Aww popped iiittt!

@realrednak 2 ай бұрын

Your check motor lights are on

@danschneider9921 3 ай бұрын

Good old "Meec" tools.....

@otteszchannel2012 3 ай бұрын

Did the commutator explode on the black and decker grinder?

@bradfordloebs8133 Ай бұрын

Anything can become a DeLorean if you add enough voltage.

@monikasarmaviciute9465 Ай бұрын

1:27 Sounds familiar...

@ITZNOTAdum 2 ай бұрын

1:35 a generator?

@dooder126 3 ай бұрын

all gas no brakes

@michimannes7822 2 ай бұрын

can anyone explain to me why the amps go up too when increasing the voltage? In electric cars, if I have a full battery, the motor gets more volts, less amps and with an almost empty battery the motor gets way less volts, but much more amps (at least for a short time until the BMS caps the amps drawn.) Cars with an 800 Volt system do use only half the amps as compared to the same model on an 400V system. But with half the Amps, the losses of the engine are only 1/4. But in all cases, the motor uses the same energy, but just adjusts amps to hold its target power / target rpm in comparison to the voltage available... Why the heck to all those tools spin until doom and just increase the amps drawn even if the voltage is risen?

@meihopkins Ай бұрын

because if you increase the load of the motor the amps will increase in a higher rate too. you can see that current draw is steady until comes the overvolt and the motor rpm doesn't climb as fast as he can. that's when the motor needs more current to keep it turning.

@hellenfamilia5150 Ай бұрын

5:43 not an charger [race car]

@azkaail4966 2 ай бұрын

Why mans live so short? Mans:

@widyaperwitasari1983 2 ай бұрын

5:09 Is that funhy?

@villemaanselka9241 3 ай бұрын

What you had a biltema powertool are you uropean?

@Cskirt 3 ай бұрын

Yes, swedish

@TalhaBuğraBerk 11 күн бұрын

IKEA Swedish meatballs😂

@fromhardware 3 ай бұрын

Bro tryna create time machine

@kingzyjhiepelongco3593 3 ай бұрын

The Saw Sounded like a Jet Engine Impact Wrench sounded like a 4 Stroke Engine and then Throttled up 9 in Grinder is not known what they sound like in overclocking the power Drills sounded like a Jet Engine (Same as the 1) Rotary tool is not known what they sound like