How to Replace the Battery in a MacBook Pro Retina 13-inch (late 2012 - early 2013) MacBookPro10,2

Yes, it’s possible! Remove and replace your glued on 2012-2013 MacBook Pro Retina battery.
This NewerTech NuPower battery is a replacement for Apple original part number A1437 and is compatible with the following MacBook Pro models:
- MacBookPro10,2
Shop battery replacement kits for 13-inch 2012-2013 MacBook Pro Retina here:
eshop.macsales...
Shop all battery replacement kits for nearly any MacBook Pro here:
eshop.macsales...
Restore You Mac's Runtime!
When high-performance, quality, and longevity are your battery upgrade criteria, NuPower is your answer. NuPower batteries are designed to meet and exceed factory specifications. With renewed battery life you can listen to more music, watch more videos, and get more work done between recharges. To ensure your confidence and satisfaction, these highest-quality batteries are backed by free, award-winning US-based support and a one-year, 48-hour, or less turnaround warranty.
A Perfect-fit Solution
NuPower batteries are engineered to perfectly complement the fit and finish of your Mac® notebook as well as offer full compatibility with applicable OEM sleep and power reduction modes.
INSTALLATION DIFFICULTY LEVEL: 5 OF 5
Recommended for experienced technicians.
Tackle the job in less than a day.
Ready to take on the removal and replacement of your soldered OEM battery in your 2012-2013 MacBook Pro Retina notebook? This complete DIY tool kit from NewerTech will help you do just that. Includes a high-quality, model-specific battery; comprehensive, model-specific video guidance, and 24/7 customer support; plus all the tools necessary to get the job done. Everything has been tested for usability and reliability, including the adhesive remover you’ll need to lift the OEM battery from its secured position.

[@johnbutts6950]

As many have already mentioned, this video is incredibly helpful. I replaced my mac book battery after owning for 9+ years. The steps are straightforward, clear, and simple to follow. Thank you!

[@poweredbyowc]

Thank you for your kind review. I am glad this video was able to help you.

[@light3572]

The instructions were very clear. I changed my MacBook Pro battery last night which took me approximately 30 mins to change. I am still going through the process of the battery management system. The new battery was just like the old battery and was not difficult to replace. I viewed the video 2-3 times prior to starting the process so I could understand the methods without have to rely so heavily on the video.

[@justincase2600]

did you don the protective eyewear and apply the adhesive remover?

[@veryveryintense]

Thanks so much for the incredibly clear instructions. I have been afraid for ages to do this procedure as my Macbook is my only computer and even after nearly ten years it has full support, I just updated to Big Sur and it is running smoother than ever, and it is perfectly capable of doing everything I want it to do, so it seemed like an unacceptable risk and my computer is increasingly chained to its power outlet and gets 1.5-2 hours run time on a good day off the battery. Now i'm looking at how relatively simple this is and thinking its well worth it to get the 5 hour+ run time back and keep this thing going for years to come until the M1 equivalents are mature and less outrageously expensive, this has been a great help.

[@poweredbyowc]

You are very welcome! We work to provide videos for that exact reason, so we can keep more and more Macs going for longer periods of time. Plus we agree, why update/buy a new machine when you can simply upgrade and keep using the older one. There are plenty of machines prior to the M1 that were great when they came out, and are still great even by today's standards, and that's more reason to keep them running. Glad to hear we could help you and encourage you. Good luck with the battery replacement....You got this!

[@jeffc888]

Great video, just replaced the battery on my late 2012 pro retina.

[@RoscoeHoffman]

Great video. I just replaced my battery for my MacBook Pro 2012. Well detailed and easy to follow.

[@skitzvitz]

Instructions are on point, 30 min start to finish. My A1425s battery went from "service battery" to bulging within a week. Used isopropyl alcohol to loosen the adhesive, which worked just fine. However was still incredibly careful(read crapping bricks!) in separating the ballooned battery packs (did not want a fire).

[@mariusberger3297]

that replacement battery looks hella sketchy. good video, even though that music nearly drove me insane

[@johnnykyson2928]

You prolly dont care but if you are bored like me atm you can watch pretty much all of the new movies and series on InstaFlixxer. Been watching with my girlfriend for the last few months :)

[@jonathanwayne6063]

@Johnny Kyson definitely, been using InstaFlixxer for since december myself :)

[@ralfdittes5765]

Hey guys thanks a lot for this fantastic video. It was really not too difficult saved my MBP and me a lot of time and money. MBP works proberly after the replacement of the battery. Only 296 loading cycles but 7,5 years of hard lifetime at work. Hope works the same time again.

[@neilreid9005]

Excellent instructions. I completed this last night without any problems. There are only three batteries instead of the five which came from the Apple factory, but it looks like the overall battery volume is slightly greater than that which originally came with my MBP. Enjoy!

[@moonratz]

Hey, could you tell me where to get an official battery from, or the name of it? I am living in Mexico and nobody here seems to be able to replace the battery without replacing the whole cover. I have never ever done anything like this before- would it be a terrible idea to try? Thanks

[@murd777]

Pharoah Hendrix There is no original battery. The only place you could get an “Original battery” is directly from Apple and they don’t sell parts. Any battery you find online is not original.

[@oscartello5281]

@@moonratz hola!!! ya conseguiste a alguien que pudiera cambiar tu batería?

[@reggiepope2558]

Excellent video, installed it without a hitch. Thanks

[@poweredbyowc]

We are happy to hear. Thank you for your feedback Reggie.

[@MrOsvaldoFreire]

Bravo, I did it! Actually, the way you explain it's pretty easy if we happen to have the proper tools.It took me a little while because this was the very first time i was opening a laptop and the screws are quite smalls. Eventually i did it.Thanks so much and god bless you!

[@poweredbyowc]

We are happy to hear. Thank you for your feedback :)

[@tonylee1524]

很詳細的解說，讓人輕鬆的學習

[@leamdown20]

Great video. The step by step guide is *almost* idiot proof! Thank you!

[@joaolavoier6960]

What is this adhesive remover, and where I find it?

[@schirombaseball95]

That’s a nice new look

[@jahjahbee]

I replaced a new battery like discribed in the video. Now the new battery is at 45% all the time and it says that it is not charging. When i disconnect the Power the MacBook immediately shuts down.

[@GOKU8125]

Where'd you get the new battery from ?

[@jahjahbee]

@@GOKU8125 from a shop that specializes in notebook batteries

[@GOKU8125]

@@jahjahbee Try to get a refund off it, probably a faulty battery

[@jahjahbee]

@@GOKU8125 thats what i did. systemreport said: battery installed, but as is said, no charging...

[@GOKU8125]

@@jahjahbee i got mine off Amazon, has been working for the past week so far.

[@HyunKiMin]

thanks

[@longngan9394]

Hi thanks for you video. I done all the step the battery % show 100% after charging but when i pull the charger out my mac turn it off like no battery. What wrong with it please help me ?

[@poweredbyowc]

Hey Long Nguyen, We have some troubleshooting steps here that you can follow and may help. The first thing I would recommend doing would be resetting the System Management Controller. Resetting the System Management Controller (or SMC) in a Mac can be a useful way to troubleshoot various kinds of problems that arise, typically related to power issues or issues that coincide with new hardware being installed in the computer. Detailed instructions on performing a SMC reset can be found on Apple's website here: support.apple.com/en-us/HT201295 After resetting the SMC, I would also want to perform a NVRAM or PRAM reset. This can be done with the following instructions: PRAM Reset: 1) Start the machine while holding down the Option-Apple-P-R keys 2) Wait until you hear the 3rd startup chime, then let go of the keys and let the machine boot up. Lastly, we would want to go through a proper conditioning cycle, to help the battery reach its maximum lifespan. This process will help calibrate the battery and extend the full charge life. You can find this process with detailed instructions on our Battery Conditioning Guide: eshop.macsales.com/Tech/manuals/newertech/batteries/batteryconditioning_r1w.pdf If these steps fail to work in getting your battery performing up to specs, please let me know and we can look into this issue further for you. Thanks!

[@longngan9394]

@@poweredbyowc thank you so much i got it

[@TheLarsUrban]

Is it possible to transfer the old battery pcb to the new one?

[@Sachiyo_visha]

whether the a1437 series can be used for the a1425 series??

[@IPULCOLUMBIA]

Pls help...is this for a early 2013 MacBook Pro 15 inch? Does this video reflect that model...its the model I have and really need to change the battery, my trackpad is starting to act up...I know its probably from the bulging from the battery...please let me know thanks!!

[@poweredbyowc]

The battery for the 15", along with installation video, can actually be found here: eshop.macsales.com/item/NewerTech/BAP15MBR95WK/

[@N9MGyoutube]

Wondering if anyone can help i've changed my battery as my original mac battery said "replace". The one I replaced with with then had a "service battery" notice so I got another brand new battery and installed it and it still says "SERVICE BATTERY" I have checked the battery cycle count and its on 1 so I can't think of why it would need servicing and the battery life does not last Long at all. MID 2012 Macbook pro.

[@poweredbyowc]

It is possible that there's an issue with the battery cable itself, between the logic board and battery.

[@N9MGyoutube]

@@poweredbyowc Thank you I shall try having a look at that :)

[@lukeriley2407]

So I just went through this process and my laptop does turn on and has charge at the moment, but the battery won’t charge.

[@poweredbyowc]

I am so sorry to hear you are having this issue. My sincerest apologies for any inconvenience this issue may have caused you. Please give us a call at 1-800-275-4576 , and we would be happy to troubleshoot this issue, and get your machine back up and running.

[@lukeriley2407]

OWC thank you for the reply. Turns out my old charger was bad too so I ordered another and my problem has been fixed laptop is up and running perfectly. Thank you for making videos like this! I replaced my SSD about two years ago and now my battery. Your videos made it easy to get the job done, saved me some money, and taught me a few things. I appreciate it!

[@ioaniacob7068]

I have this one with his original battery,is it normal to drai like 15 20 percent in like almost an hour?

[@veryveryintense]

Do you mean on your original battery? Because mine loses that in about half an hour at this point (with the service battery warning)

[@ha81320]

does anybody know the size and the correct name of these "screwers", i met some issue when i negosiate the type of the screwers when i was in a electronic diy shop. thank you all guys.

[@royalsonshrestha9982]

It is a t5 and t7pentalobe screw for the outside and for the motherboard I think its the same or it's just a Philips screwdriver.

[@TheRookie738]

What tool did you use to open the back case?

[@poweredbyowc]

These would be Pentalobe P5 screw drivers like the one linked here: eshop.macsales.com/item/NewerTech/TOOLPNT5/

[@tamilbiker]

Any video to upgrade ram on late 2012

[@poweredbyowc]

Pradap Jackie, Regrettably we do not have a video to upgrade the RAM on a late 2012 MacBook Pro as this was when the RAM was first getting soldered to the logic board in the machine, we do apologize.

[@tamilbiker]

@@poweredbyowc thanks for the response