Simplistic Look Cabochon Pendant Wire Wrapping Tutorial remake of 2016 video

[@OxanaCrafts]

Materials: 1 pieces of round 18 gauge dead soft wire, 22 inches long 24 gauge half-round dead-soft wire OR you can use round wire in 26 or 28 gauge instead For bail: 1 pieces of round 18 gauge dead soft wire, 2 inches long 1 oval cabochon, mine is a Sunstone, about 22mm (1 inch) )tall Old tutorial: kzbin.info/www/bejne/rqW9dGxpjJicr5I Swanstrom tool set : tinyurl.com/mpbjxpu6 Other tools I recommend: Pliers(Xuron Tweezer Nose): amzn.to/2Vghbyw Wire Cutters(Xuron Micro-Shear): amzn.to/2UcRWg4 Round Nose Pliers(Beadalon Ergo): amzn.to/2U6ee3d My bail making pliers: amzn.to/3z2W1rW (the above are all affiliate Amazon links) All about wire: kzbin.info/www/bejne/qIKrp52IYtJloZo All about tools: kzbin.info/www/bejne/m6GYn6yQm8qVmdE General FAQ video: kzbin.info/www/bejne/h6PKeqB-oad3f5o All about buying stones: kzbin.info/www/bejne/h6PKeqB-oad3f5o My Website(where I sell my jewelry): oxanacrafts.com Instagram: instagram.com/oxana124 Patreon(where you can support me via donations): www.patreon.com/oxanacrafts Facebook: facebook.com/OxanaCrafts

[@debbiemills7736]

I love your designs. So simple, elegant and uncluttered!

[@OxanaCrafts]

Thank you! 😊

[@tracydriscoll4998]

Love the simplicity of this! It really shows off the stone! 💜

[@OxanaCrafts]

Thank you! 😊

[@15Montrano]

I love this remake of an old design. I encourage you to do more of these as I know you got better and better with new techniques over the years. The newer tutorials are easier to me than the older ones.

[@OxanaCrafts]

Thank you! It was definitely very fun to revisit an old design :)

[@mjremy2605]

13:11 - This is the point where both front and back swirls should be hammered. When you hammer metal, the metal hardens and is hard to work with, so save the hammering for the last. This is a lovely, elegant design, very simple and shows off the stone well. The back is also finished off nicely. Doubling up the bail wire gives a very nice touch, and looks opulent compared to a single, sparse look. Very nice. Love it! Thank you!

[@OxanaCrafts]

You can definitely hammer the back swirl later at the same time as the front swirl if that's easier for you. I just like hammering the back swirl first because after being hammered it becomes harder and doesn't mis shape as easily when I do all the next steps and wrap the wire around the stone, but it is all personal preference.

[@junerobbins6871]

This is really pretty. I've done wire wrapping for some time now, and mine look sloppy cause I'm not getting my wires wrapped tight enough. You've made it look so nice and tight with your method. I'll have to try again

[@amo8773]

I love this simple design and I'm going to keep practicing. I'm so impressed you are doing all this with the stone held up in the air!

[@mywifetheartist]

Oxana you are such a great teacher. This is beautiful. Thanks for sharing. ❤❤❤❤

[@OxanaCrafts]

You are so welcome💕

[@MariaWeaver-km7wj]

Lovely graceful look. Thank you for all your free tutorials.😊

[@OxanaCrafts]

You are so welcome!

[@therisingphoenixlovedbynat121]

I love these simple designs. So cute❤

[@OxanaCrafts]

Thank you! 😊

[@AmyKitsune54]

Oxana tu es géniale!! 💜 J'adore ton travail, c'est magnifique! Et tes explications sont très claires : tu es une super professeur, j'apprend toujours beaucoup avec toi! 😊❤ Thanks a lot!!! 🌸

[@OxanaCrafts]

Thank you!

[@shelingEB]

When you've been wrapping so long your thumb bends backwards 90 degrees! I love your work - thank you for all these films x

[@OxanaCrafts]

Thank you! My thumb has always been like this, it is called Hitchhiker Thumb and is genetic, about 30% of the population have it

[@kyliewileywumpuswoorankin9017]

This would be such a cute design for making Cinderella's Carriage! I don't know how you'd add wheels but it feels like it could be possible

[@jeanwilcox3464]

Simplicity is elegance

[@carollreece1190]

Beautiful! Such an excellent teacher! Thank you!! ❤

[@OxanaCrafts]

You are so welcome!

[@lawrencezolcienski3936]

Thanks for the feedback. Much appreciated. I love your work and credit you when I borrow one of your ideas. Keep up the great work!

[@OxanaCrafts]

Thank you!

[@FreeYourMindArt]

Looks easy to do... but it's not. we have all got to learn by practice. Thank you for sharing.

[@nancyhainline2517]

Thank you for showing your technique.

[@ImagineItColoring]

Great design! Thanks for sharing how to do this one again :)

[@OxanaCrafts]

So glad you liked it!

[@deag8440]

Gorgeous

[@OxanaCrafts]

Thank you!

[@silviagauna6520]

Ya encontré los materiales en Español gracias.

[@donarussell6611]

Very nice. Thank you!

[@MelanieMacDonalDMELSPLAYLISTS]

LOVE THIS 💯 THE BACK REMINDS ME OF AN AMMONITE ... OOO I REALLY WANT TO DO THIS , BUT I GOTTA SAY I AM HESITANT ABOUT HOLDING IT ALL TOGETHER & WHILST I HAVE ABOUT 5 METRES OF 22G HALF ROUND WIRE , SAME AS WITH MY RIO GRANDE HUGE ROLL OF 21G SQUARE .. I HAVEN'T YET USED THEM 🙈 IDK WHETHER I SHOULD HAVE GOT A THICKER SQUARE I JUST HAPPENED TO BE LUCKY ENOUGH TO GET SOMEONE ELSE HERE IN THE UK TO SELL ME ONE OF THEIRS ... I AM HAVING SOME EYE ISSUES SO I CAN'T ACTUALLY SEE MY WRAPPING WIRES PROPERLY & HAVE JUST BEEN LUCKY WITH MY FIRST PENDANT I JUST MADE ( NO TUTORIAL ) & MY FIG 8 WEAVE BAIL LOOKS FANTASTIC 💕THOUGH IT TOOK ME 5 GOES 😬😂 IT STARTED OFF QUITE WIDE WHICH I LOVE , BUT DUE TO THE WIRES SLIDING UPHILL ON THE 2ND HALF I ENDED UP WITH A MUCH NARROWER BAIL & THE ONLY ISSUE I REALLY HAVE ARE WITH THE TINY ENDS POKING OUT , NOW MAYBE THAT'S DOWN TO THIS FRUSTRATING EYE ISSUE I HOPE WILL BE SORTED ASAP OR WHAT APPEARS TO BE CARPELL TUNNEL ( OR MY FIBRO ) BOTH EQUALLY FRUSTRATING , BUT I AM PRACTISING WEAVES ATM TOO THOUGH I LOVE GETTING THE HAMMER & BLOCK OUT TAKING MY FRUSTRATION ON OUT ON THICK TWISTED WIRE & MAKING CHUNKY RINGS 💯💕 OMG I AM SO SORRY OXANA , I OR RATHER MY ADHD MAKES ME RAMBLE ON FOREVER 🙈 SO MY THANK YOU COMMENT TURNED INTO MY LIFE STORY & HISTORY OF AILMENTS 😆 THANKS AGAIN FOR THE BEAUTIFUL TUTORIALS 💕 & NO NEED TO REPLY UNLESS YOU HAPPEN TO MOONLIGHT AS A DOCTOR 😂

[@OxanaCrafts]

That's what I was thinking too, the back looks like an ammolite! Sorry about your eye troubles, hope they get resolved quickly!

[@MelanieMacDonalDMELSPLAYLISTS]

@@OxanaCrafts THANK YOU 💕 I AM SUPER EMBARRASSED BY MY RAMBLING COMMENT 🙈 I WISH MY BRAIN WOULD SHUT UP 😂

[@bextermonkey246]

Thank you! Love all your videos

[@OxanaCrafts]

You are so welcome!

[@gajjargaurang5330]

Good job 👍

[@OxanaCrafts]

Thanks!

[@monaozols3123]

Thank you for the great videos. Your teaching skills are very helpful. I was wondering if you could help me with a question. I have a stone that is a little rough on the edge can I file it smooth some how? It's already in a setting.

[@OxanaCrafts]

Maybe with some sandpaper? But then the shine would be filed away from the stone

[@TwoPointViewMedia]

All theses words loose, tight, hard, soft, bend, hold it, from the back,

[@ritoladit815]

Very nice job

[@OxanaCrafts]

Thank you!

[@A_New_View]

New subscriber here, great video I want to start doing this your video was very good and informative! Ty

[@OxanaCrafts]

So glad it was helpful!

[@marleneplatcek6364]

Looks amazing

[@OxanaCrafts]

Thank you!

[@tdubbs4915]

How do you perfectly bend your wire so that it doesn’t look all kinked and bent outta shape? Thank you for this;)

[@mandicoleman7433]

Simply beautiful 😍 ❤

[@OxanaCrafts]

Thank you! 😊

[@suzannebeddoes7262]

I have missed you xxxx

[@OxanaCrafts]

I have not gone anywhere, still here, posting a new video every weekend :)

[@carolhammond9624]

You are so talented! Where do you get your cabs? They’re all so beautiful! ❤❤❤

[@OxanaCrafts]

Thank you! I've collected them over the past 10 years, I've purchased from probably hundreds of different sellers on places like Etsy, eBay, Facebook groups, and Instagram.

[@SkateRock7]

Love these.

[@OxanaCrafts]

Thank you!

[@mistysaldana3277]

Simple design. I like it but dont like all the ties in the back. Seems it would be easier to make a frame wite pass around the inner backside, (so there's another loop around basically).

[@OxanaCrafts]

Yes you can definitely do that, you'd still need some wires though to hold it all in place back there.I think in the original tutorial from 2016 on this design I did it that way.

[@robotmechanic3923]

It is,and I found that out the hard way. This was so over complicated especially as a beginner. I was following along step by step, and now I have a good bit of trash wire now.

[@silviagauna6520]

Si me pudieras decir q cable y como se pide ,en los comentarios gracias.

[@OxanaCrafts]

Materials: 1 pieces of round 18 gauge dead soft wire, 22 inches long 24 gauge half-round dead-soft wire OR you can use round wire in 26 or 28 gauge instead For bail: 1 pieces of round 18 gauge dead soft wire, 2 inches long 1 oval cabochon, mine is a Sunstone, about 22mm (1 inch) )tall I order my wire from riogrande.com

[@silviagauna6520]

Hola .Miro los tutoriales pero no entiendo el idioma.

[@user-lx5gz2on2i]

doea it need to be deadsoft or will half hard work too?? will half hard hammer flat like yours?

[@OxanaCrafts]

half hard will not work, it would be too difficult to bend around the stone, it sort of springs back when bent

[@user-lx5gz2on2i]

@@OxanaCrafts thank you!

[@jeanniemainzer8551]

I get so much Minnesota in your accent. Am I right? ;-)

[@Zenmountaingirl]

What is the stone?

[@OxanaCrafts]

it is sunstone

[@chandrakala8146]

Hi mam !flat and iron sheet, with Hammer.How much cost

[@OxanaCrafts]

I got it many years ago so I can't remember the price

[@TXLPE]

No matter what I do my stone slips out, I can’t get it to hold in place or get two equal wraps. It’s all over the place. I’m not new to wire wrapping either. Am about to throw it across the room 😂

[@OxanaCrafts]

so sorry to hear that, if the stone comes out the wires need to be more on the stone trapping it in, also the stone needs to be domed, like a cabochon. And lastly the wire should be dead soft as half-hard sort of springs back when bent.

[@silviagauna6520]

Los comentarios si puedo pasarlos al español, pero no el tutorial😢

[@anthonyman8008]

Ooooooh

[@lawrencezolcienski3936]

I don't care for the bend personally

[@OxanaCrafts]

I also prefer it without that little bend, I usually make them without it. However, if the stone is still a bit loose I wanted to show this last troubleshooting step of securing the stone, because I wouldn't want anyone to have to scrap their pendant if the stone is still loose, it is better to just add the little bend at that point and save the pendant.

[@lynnmontgomery]

I love that bend. Adds character. I don’t usually like the bend/twist on the back of pendants to tighten up wires though.

[@thatkiwiadventuregirl]

Why is my 5 wire weave pendants easier than this 😂😂 so frustrating

[@OxanaCrafts]

this one can be tricky especially if doing this type of style for the first time. what sort of issues are you encountering, the stone falling out?

[@LindaJones-k1z]

Thank you so much! You are such a wonderful teacher!