OZ Cut 2 blade Elite sharpening and sharpness test

A review of the Oz Cut 2 blade head out of the box and then how to sharpen this head using the stay Sharp fixed blade guide.

[@GrowinwithAJ]

i was about to walk out the door and buy these until i watch your video. no doubt they are better after sharping

[@402bonecollector]

Those are mine! I knew they where very dull out of the box. Thank you for the video I’m exited to shoot em and sharpen them myself 🤘

[@justin81011776]

Mine were very dull also… They should spend less on packaging and put more into the product.

[@markhess6061]

That’s a great head along with the VPA 2-blade which is my favorite

[@bobbyjackson3689]

How could u sharpen the ozcut hurricane single bevel 3 blade

[@tonymiller1216]

Do you have a sharpening solution for the hurricane 3 blade?

[@innovativeoutdoorsman5067]

Sorry, No

[@tonymiller1216]

@@innovativeoutdoorsman5067 just a thought. What if you put a blade in one of your guides (not sure which angle) it could possibly put a blade at the correct angle on the stone.

[@matt13650]

Have you had a chance to look at the ozcut hurricane three blade yet and how are they to sharpen?

[@Fedoratip79]

i just ordered some knock offs of this head in stainless 440 so should be rockwell 58

[@paulcrave3112]

Maybe in one of your videos, you could show us the various burrs from the various grits through your microscope.

[@innovativeoutdoorsman5067]

I made that video back in July. Here is the link. kzbin.info/www/bejne/e4DEYX17qZWtaqM

[@paulcrave3112]

@@innovativeoutdoorsman5067 I should have known you’d have one. Thanks again.

[@wapitiRack13]

What is the sharpening tool you used?

[@innovativeoutdoorsman5067]

that is the stay sharp guide,fixed blade guide from staysharpguide.com

[@Justin-sv3kq]

They should have spent the package money on better steel. Was not a fan of these heads and would not buy again.

[@Oogs1r]

What made you not a fan besides the steel used?

[@Justin-sv3kq]

@@Oogs1r I get having nice packaging and a good marketing team but i feel like they could have spent the money on the molds and steel instead. It's soft, the edge does not hold well and all the sharpening that has to go into them to get a true sharp edge takes a lot of work. If you are not good at sharpening you can make the not spin true by the time you are done. I really like the design and think there is a place in the market for this head it just need some better attention to detail for the end user. A good product will sell itself without all the fancy packaging.

[@tomalophicon]

They didn't spend the money, the customer did

[@Gavin_McGregor]

Garbage heads in my opinion. I’ve shot better quality heads from eBay. Another great video but!