Ford Truck Key Fob Programming

[@ozzstars_cars]

If you need to purchase an OEM Ford F150 Key Fob w/ remote start here is a link: amzn.to/2pJHCiw Thanks for stopping by the channel. Please Like, Subscribe and Comments are always appreciated! - Glen

[@JosephMassimino]

That is where I bought my Ford key fob.

[@JosephMassimino]

I paid $55.00 to have it cut, and $65. 00 to have it programmed.

[@dflipsidez]

I lost 1 of the original keys, can I still program it?

[@jquiznos2283]

Does the light on your key light up whenever you press any of the buttons or only certain ones? I have a key that I programmed following your steps (thanks BTW, smashed LIKE) but the remote lock/unlock doesn't work. I don't see the light turn on when I hit the buttons, just wondering if I got a dud fob (yes, I replaced the battery).

[@ozzstars_cars]

@@jquiznos2283 only lights red or green when the remote start is used.

[@joemama-lq9yx]

Worked for my 2015 Ford Fusion...key fob on Amazon for $40, got it cut at Ace Hardware for $13, and a big thanks to you. Saved $200 from getting it done from the locksmith, and $300 from getting it done at the dealership

[@ozzstars_cars]

Glad to hear it worked out well Joe. Take care -Glen

[@michaelleone3436]

You are my hero! I have a 2016 F-150 XLT SuperCrew, bought fob from Amazon ($33), local locksmith ($25) to cut key. Ford wanted $45 and other locksmith wanted $55 to cut key. Your programming instructions were spot on! You are my new DIY buddy! Thank you from a very grateful handyman/consumer!!!

[@ozzstars_cars]

That's great news Mike! You save a small fortune and got it done yourself. Thanks for the comment.👍

[@ronrandall7118]

Ozzstar, just watched your video. I bought a new '23 Ford Maverick and bought two spare key fobs on Amazon. Later in your video, you mentioned about getting the key cut first before doing the programming. Thanks for the video!!

[@ozzstars_cars]

Glad the video was helpful!

[@jabberwocky2209]

Thanks Glen! This worked perfectly. My local ford dealer cut my key for $5 and I was able to program the new key thanks to your instructions.

[@ozzstars_cars]

Wow, $5 to cut a laser key is an awesome deal! Your welcome and glad the video helped you out. The guys at the dealership must be impressed. 😁 -Glen

[@bmwdudeOH]

Thanks for posting this! Bought a new one on Amazon and the Ford Dealer cut it for $10. Process worked perfect 1st time. Only issue I had was new key wouldn't lock/unlock the the doors, figured out the battery was dead in the new fob, replaced the battery and it and worked perfect, didn't even have to reprogam it again. You do not know how much aggravation you saved me!

[@ozzstars_cars]

👍

[@rometorres1084]

Did you just give them the vin number to cut the key or you have to have the vehicle there

[@bmwdudeOH]

@@rometorres1084 I had another key and they just duplicated (cut) it an then I programmed it.

[@davew1314]

This was a huge help! I tried using the instructions from the owners manual with no luck. Following your video it took me less than two minutes to complete two keys. Thanks!!!!

[@ozzstars_cars]

That's great! Fast and easy, reading is overrated sometimes. Haha

[@brasha78]

Just to clarify Dave, did you program two new blanks off the single original key fob. Thanks if you get back to me on this I appreciate it. If so did you have two previously programmed keys like ozzstar. It seems like you wouldn’t because that would be overkill to me to have four but everyone has their own reasons for the way they do things. Thanks in advance. Just got me a 16 lifted f150 yesterday and I’m liking the eco boost.

[@Badgertronix]

Things have come a long way since you could start your truck with a screwdriver. Thanks for sharing. Cheers!

[@ozzstars_cars]

Isn't that the truth!

[@jettschenker]

uh what line of work were you previously in? Auto theft?

[@k9nmt]

Worked perfectly first time on 2017 F-450! Great video.

[@ozzstars_cars]

Good news, thank you!

[@anonymousanonymous7770]

What if I don’t have three key fobs like the one you showed your trying to program? Am I able to buy a new one get it cut and program it myself even if I don’t have any other key fobs because my car always had one key fob never really bothered to buy extra spare ones.

[@ozzstars_cars]

You will need a key programmer with anything less than 2 fobs.

[@griffturfcare5061]

That was money, worked on my sons 2014 fusion. Saved tons of money

[@stuzman52]

Great explanation Glen and very simple demonstration of how to program the FOB. I believe this is something that I could do. 😀 have a great weekend and don't work too hard! 👍

[@ozzstars_cars]

Haha Terry anyone seeing this video can now be an electrical genius! Hope you have a good weekend as well

[@Frankie_M.]

Cool video brother thanks for the tips on how to program keys 👍🏼👍🏼👍🏼✌️

[@ozzstars_cars]

Your welcome and thanks for watching and commenting Frankie

[@steves4639]

really enjoy your vids. good point about always having 3 fobs. I was given a beater VW that only had the valet key which only worked the drivers door and ignition...found a place online that could take a hi-res photo and they cut 2 fobs from the photo. Also had to rent a proprietary cable and software to get the dash code and program the suckers...all together about $150...would have been more with the VW logo fobs. its awesome to be able to get in the trunk now! lol moral of story is keep 3 and immediately replace a lost one or its either a LOT of money or a lot of hassle to replace. Thx again bud

[@ozzstars_cars]

Exactly Steve, having three is the key! Thanks for sharing your story and your support!

[@RustyGlovebox]

Thanks Ozz for that instruction. That will come in handy. Enjoy your weekend

[@ozzstars_cars]

Have a good weekend Lloyd

[@carlson.douglas.w]

Very helpful, clear video. Great job.

[@ozzstars_cars]

Thank you Doug!

[@rickd4568]

Thanks Bruce Willis. Got a fob from North Coast Keyless for my '18 F-150. Will try to get it cut tomorrow.

[@bodgitandleggitgarage]

Great job Glen this will certainly help a lot of people out there especially when you don't need fancy tools just hope you don't lose two keys at once LOL

[@ozzstars_cars]

If I lose two key fobs at once that means I'll have less money for beer! haha :-(

[@bodgitandleggitgarage]

Ozzstar that's when the shit really hits the fan No Beer

[@DaveCossairt]

If you have an auto start on the vehicle you can arm the ignition then hit the brake pedal with the AutoStart then place your key in arm the ignition turn it off and placed the third key in to program it

[@deborahdiehl6010]

Thank you so much! I learned a lot and you made it so easy even for this old granny !

[@ozzstars_cars]

Your welcome Deb! I'm grandma friendly. hahah Take care

[@oldskoold22]

I just followed your instructions and worked perfectly. I must ask though; when I use the "third key" it locks the doors after programming when I start the vehicle. Does that persist and override the speed sensor that uses them too lock when you drive off? THANK You! It is a previously owned 2016 F-150. Scenic Ford in Mt. Airy cut it for free and just took me 20 seconds to get this dun!

[@TheDisgruntledMechanic]

good video and explanation Glen. Good old Chevy taking care of the Ford owner!

[@ozzstars_cars]

haha yeah I know. Imagine if corporate Ford knew the dealership sent me down the road to the Chevrolet?

[@NewLevelAuto]

Ozzstar maybe they do now 🤣

[@Gunnypauly73]

Great , thanks for the video. Was wounder how to program a new key !

[@NewLevelAuto]

There ya go givin away the good stuff 😑. I could've mad money being called in for a programming 😉. Great video as always!

[@flatratemaster]

New Level Auto I know right😉

[@ozzstars_cars]

This was all smoke and mirrors, nothing to worry about. lol I'll make it up to you somehow someway Keith. haha Thanks for watching and commenting

[@danwait2814]

Worked perfectly thanks bro

[@ozzstars_cars]

Nice Dan!

[@toddhill2392]

I have a 2016 F350 with 2 oem keys. I bought 2 new keys and had them cut at Ace for $5 each. Step one and two worked for the first key. Then I programmed the second key, it worked but canceled out the first key ( no longer works). So I reprogrammed the first key (it works) but canceled out the second key. The working key has lock/unlock/ remote start that works but not the global window down as the oem keys do. Doe's that mean I can only program one key using this method?

[@toddhill2392]

Sorry for jumpong the gun, got both keys working. Your system worked great, it was me that failed. Sorry to say when I bought the the 2 keys wuth a programmer for $140, didn;t even use the programmer. I still saved money by not going to the dealer.

[@fredwollscheid7413]

great news will this work for a keypad as well ?

[@zeshawniqbal1031]

Hey there do you have a aftermarket remote start and it still works like that on the new key fob you got?

[@ozzstars_cars]

Factory remote start. Yes

[@charlesvocila7669]

GREAT VIEDO exactly what I needed to know

[@GoTechTraining]

Show me those anti-theft codes!!! :) Well done Glen, Ford's run this on many models going wayyyy back. ~Mike

[@ozzstars_cars]

Keep your fancy key fob handy Mike, cruising in that fancy Lariat :-) Thanks for watching and commenting!

[@ms-bl9ju]

Worked perfectly! thanks for the video

[@ozzstars_cars]

Good news!

[@osodeep6]

Thanks great video.. Can you do this with the "push-to-start?

[@ozzstars_cars]

I haven't programmed any push start F150's, not sure but I believe the fob has to be in the dock station to do it.

[@osodeep6]

@@ozzstars_cars Thanks!

[@oldskoold22]

Just answered my own question.... It don't! Thank you again for saving me a bunch of $$$!

[@brodie2005thegamer]

Does the same thing work with the 1998-2003 key instead of the 2015-Present one?

[@roberttyree7712]

Work like a charm thanks for the info

[@ozzstars_cars]

Your welcome.

[@bigpapa41993]

Will I be able to do a switchblade key fob for my 2014 f150 FX4?

[@thebignewfie]

Awesome video, thanks a lot man!

[@ozzstars_cars]

You are welcome. Thanks for the comment! -Glen

[@Barrskie101]

Hey man thanks for the video! I have a key fab and a separate one fore remote start and I want to combine them into 1 fab. How is the distance on the new fab???

[@ozzstars_cars]

Key fob distance is works pretty far with a fresh battery. I've been 100 feet away and it has no prob.

[@chuckoman]

Brother thank you great video keep it up

[@OneAuto]

Nice job Glen. Was the key cutting machine a copy cut or did they do it from a key number?

[@ozzstars_cars]

I gave them the key code and the machine brings up a picture on the screen of what it should look like and then cuts the blank. More accurate that way. Then after the blank is cut it was visually matched to the original key. I kind of wish I filmed that, it's almost amazing.

[@OneAuto]

It wants to be for $10K 😂

[@mattdizzy5453]

And this worked perfect, thank you. Liked and sub 👍🏻

[@ozzstars_cars]

Great news and thanks!

[@flatratemaster]

Good video Glen!

[@ozzstars_cars]

Thanks Mike, appreciate you watching and commenting. Bet you are over joyed to be back in GA? not.

[@mlb0611]

Ozzstar oh yeah😐had to help get the shop caught up and been one of those week were nothing goes right🙁

[@jamescc2010]

What kind of key cut is it - side cut or laser cut? I am looking at 2016 Focus keys and I believe they need laser cut?

[@ozzstars_cars]

Laser cut, both sides.

[@BrogeKilrain]

Can you tell how to turn off seatbelt and Key in chimes in Chevy ? Found it for Ford and Ram but can’t find Chevy 1500

[@BrogeKilrain]

every major brand as "hidden" sequence to turn them off so mechanics don't go nutz working on them. I know GM has one like this kzbin.info/www/bejne/m2fUhIJpr8lkf9E

[@Mtrx209]

I have a question Ozzstar's, i have 2 keyfobs without remote start plus another with just the remote start, if I purchase a remote like you, will my remote start program itself on the new remote?

[@ozzstars_cars]

If you have two factory programmed remotes you should be able to add several more without an issue. If your vehicle has factory remote start then that feature should work. If there is no remote start then that fob feature will not work.

[@Tom66871]

@@ozzstars_cars reviving an old thread here but you got the know. So I want to add factory remote start on my 21 STX will this work if I follow the video as well as change and allow on Forscan? The truck starts from the app when it wants to work.

[@ObTainCS]

@@Tom66871 Have u found the answer to this question? I have the same truck and would like to do this

[@bcoupar1]

Is there a way to put the same programmed key FOB in twice to trick the truck to program the third? I only have 1 programmed key, and 1 blank, newly cut key. Please advise.

[@andrewhoward1234]

Did you get this to work with just one fob?

[@philiciafolie970]

So if you only have one key and is trying to program the second key would it be the same process?? I also have a 2013 Ford Fusion so would it be the same process?

[@ozzstars_cars]

No, that won't work. Two keys needed to program a third.

[@ronniemassart3834]

I am in the exact same situation,have a 2013 fusion with 1 good key

[@Soljia]

Hey bud. Thanks for the awesome video. I have a 2017 F150 XLT. I have been unsuccessful at programming a third key. First thing that was different for me was when my doors are closed, I don't get the dings. I tried regardless, but it doesnt work. I tried with the door open so i get the dings and it doesnt work. Any suggestions? Thanks!

[@ozzstars_cars]

Do you have the correct fob for your truck. The serial numbers inside must be the same as your originals. Also is it OEM?

[@Soljia]

@@ozzstars_cars Supposedly OEM. The IC is the serial number right? They are the same. 3248A-A08TDA

[@Soljia]

Here is the cut Ford did. You think the little difference would matter? It still fit and turned the cylinder. imgur.com/a/xtT7LLF

[@ozzstars_cars]

@@Soljia you need two factory key fobs whcich a re programmed to your truck. The third one will have to match the same number found inside the OEM fob. Did you purchase a third factory OEM fob?

[@Soljia]

@@ozzstars_cars I bought my truck used, with two fobs from a dealer. I have no idea if they are factory or not.

[@colinrogers5419]

If you take the key out of the fob any place can cut the key. Ace can cut it for $3

[@ozzstars_cars]

That's what you think 🤣😂🤣

[@XMeegs]

Will the remote start button work if you have an after market remote smarter installed ?

[@ozzstars_cars]

You would have to ask the manufacturer that question.

[@adriancarrillo7238]

What year truck is this? I have a 2015 just wondering if works on this model year

[@ozzstars_cars]

2015-2020, pretty much the same.

[@jmasca0582]

What if you only have programmed fob key?? Would you still be able to program a new fob key???

[@ozzstars_cars]

Like I said in the video there must be two programmed fobs in order to program extra fobs to the same vehicle. With one fob you will need programming software to add a fob.

[@garyflegel9831]

Thanks! Worked perfect for my 2019 F150 XLT!

[@ozzstars_cars]

Great! Smash the thumbs up Like button. haha Thanks

[@ostfrontbrickace]

For some reason it did not work for me, I do have a remote starter connected to me obd2 port, would that be an issue?

[@jquiznos2283]

Like @David Chen, I followed the process here but I couldn't get the 3rd key to work to remote lock/unlock. I was able to start my truck though. Thoughts? Difference is, I got a key with remote start on the key (my other 2 keys don't have that), though I haven't installed the remote start module yet. I would expect to still be able to use the lock/unlock functions. NOPE. I thought it might be the battery, bought a new one just to be sure. NOPE. So for now, I have a key that will unlock the door with the key itself and will start the truck, but the lock/unlock functions don't work. Anyone have any suggestions?

[@ostfrontbrickace]

@@jquiznos2283 nope, they have different radio frequencies so they will not work, I made the same mistake, just use it as a spare key

[@jquiznos2283]

@@ostfrontbrickace I contacted the seller and they're sending me the right one. No I need to figure out how to remove all previously paired keys. I feel a certain way about having rogue keys out there.

[@wyattoneable]

That's funny. Ford tells you to go to Chevy. I see your taking money away from Keith with all this great information. :) Nicely done Glen. Saving money and staying out of dealerships is a good thing.

[@ozzstars_cars]

You got that right Wyatt! Thanks for stopping bye

[@hunterschultz8780]

I know this may sound stupid but could I use a 2015 ford key fob on an 08 f250.... I really like the style of the key fob

[@ozzstars_cars]

That can be answered by contacting the parts department at a Ford dealership. I don't know off hand.

[@hunterschultz8780]

Ozzstar thanks so much you don’t know how hard it is to get that anwser on the net

[@normansmith7806]

Good info Glen !

[@ozzstars_cars]

Thanks Norm!

[@JosephMassimino]

The key fob I got for my 2018 Ford F150 Sport XLT, would not program without taking it to a locksmith. He charged me $65.00 to program the remote to work with my truck. So the new Ford key fob cost me $89.00 on Amazon, then $55 to cut the key at a lock smith, then $65 to get it programmed at another lock smith. So the remote is expensive, no matter what you do, if the chip in it is not identical to the chip in the other remotes you have.

[@ozzstars_cars]

Did you buy a Ford OEM key fob? The price to laser cut a blank should be $20-30, paying $55 for that service is double.

[@keithclark8030]

Do I go to the Ford place if I only have one key? Thanks

[@ozzstars_cars]

If you want to have a second key you will have to find a shop with key programming software.

[@keithclark8030]

@@ozzstars_cars Thanks for the reply. Fortunately. The person who sold me the truck, found the other key fob. I know have two to make an extra.

[@ozzstars_cars]

@@keithclark8030 your in luck. Be sure to use an OEM fob link is in the description. Those aftermarket fobs are junk.

[@keithclark8030]

@@ozzstars_cars Agree. Thank you.

[@keithclark8030]

@@ozzstars_cars Hope it doesn't cost too much to cut. Thanks

[@patrickmcaloneyjr.3877]

If I have two factory keys without remote start. Would this still work with the remote start key, also would u get remote start then ?

[@ozzstars_cars]

You don't get remote start software unless you pay for it. Programming for non remote start fobs are the same process. Here is a non remote start fob: amzn.to/2kKVNRs

[@patrickmcaloneyjr.3877]

Ozzstar thank u!

[@driftking4wdrrriven937]

@@ozzstars_cars im curious if you know where what and how they do it? i feel like it's just a plug or sequence like programming keys that they'd do, if the power trim equipped trucks have the capability to have remote start.

[@raptortwinturbo9563]

Any idea how to program keyfobs on a new f150 that has the keyless push button start and not a hole in the colum to put a key in?

[@ozzstars_cars]

Here you go...Put the new unprogrammed Intelligent Access key in the center console pocket. Press the driver or passenger power door unlock control three times. Press and release the brake pedal once. Press the driver or passenger power door lock control three times. Press and release the brake pedal once. The indicator on the Start/Stop button should begin to flash quickly, indicating that the programming mode has been entered and two programmed Intelligent Access keys have been detected in the vehicle. Within one minute, press the Start/Stop button. A message will be displayed on the message center indicating that the new Intelligent Access key was programmed. Remove the Intelligent Access key from the center console pocket and press the unlock control on the newly programmed Intelligent Access keys to exit the programming mode. Verify that the new Intelligent Access key’s remote entry functions operate by pressing lock, then unlock, and then starting the vehicle.

[@alvinbarrera]

Hi Glen, I need to purchase that kind of key. Do you have a link where you got it? BTW Great Vid !

[@ozzstars_cars]

I purchased the key fob on ebay from a Ford dealership. Sorry I don't recall the company name but it was a good deal on an OEM part, about half price from the local dealership. Thanks for stopping by Alvin.

[@vvg3187]

Can i do that with only one original fob with a used one?

[@ozzstars_cars]

You need at least two programmed fobs to program a third this way. Otherwise you will need outside programming software.

[@vvg3187]

Ozzstar thank you, I have only on programed key(

[@williamsalazar5736]

When I performed this, I got my factory code when i turned on the 2nd key. I inserted the 3rd key and turned it off but no cycling happened. Is there anything I should do?

[@ozzstars_cars]

Is the third key fob factory oem or aftermarket? Does the SN number match the originals? I am guessing

[@simpson1704]

What happens if you only have 1 of the 2 keys from when you bought the truck? My wife lost the one fob I gave her and my key just broke from the fob and I need to get 2 new keys made to have backups again

[@ozzstars_cars]

The new keys will need to be programmed with key program software, dealership or aftermarket.

[@simpson1704]

@@ozzstars_cars I have the Forscan program. Would it be possible to program the 2 new fobs with that?

[@ozzstars_cars]

@@simpson1704 best to contact Forscan and see what the capability of that software is.

[@ronmathews2265]

My truck only came with a key, talked the dealer into getting me one for free and ordered another online thinking things were still the same as my 01, but of course it’s not, dealer said just to program it was going to be $178 really? Is there a way to trick my truck and make this work with one key and one key and fob and the new key I want to program? Use original key fob twice ? Can it be done? I miss just cycling the ignition 8 times and hitting a button

[@ozzstars_cars]

You didn't say what year your truck is. If it's a 13th generation you need two programmed keys to make extra copies if you don't own programming scanner software.

[@amberharbert7746]

Is there a way to program with only ONE programmed key fob?

[@ozzstars_cars]

Yes with a scan tool.

[@williammay6249]

this worked for my 2018 f150 so i tried adding a new key on my 2018 explorer with push button start, remote holder in inside center console on front, put 1st fob in holder, push start button, wait 2 dings, push start again(off), put second fob in slot, tap start button, wait 2 dings, push start button, put new fob in slot, push start button, wait 2 dings, push start (off), i received a conformation on left of screen saying key programming failed, repeated steps, got key programming success.

[@ozzstars_cars]

Ahhh yes, success!

[@tuan-anhnghiem4344]

can you send the link where to buy it. THanks

[@ozzstars_cars]

Try ebay.

[@AyooJake]

So you have 3 admin keys now?

[@ozzstars_cars]

Yes.

[@EXOVCDS]

Great thinking having a spare key handy! $70 bucks for fob & cutting? Man that's cheap!

[@ozzstars_cars]

I call it preventive maintenance for my wallet. haha

[@zedthyss7309]

I can start my 2020 f150 from my phone, but my fog doesn't have remote start button. Can i buy one that has the remote start button and start it from the fog instead of the phone? Thank you!

[@ozzstars_cars]

I am not a big fan of aftermarket electronics installed in vehicles, too many problems down the road.

[@jaimedabah8643]

hi I bought two more keys for my f150 but my f150 bring just one key fob and a key with out the remote how should i do to program the two new keys

[@jaimedabah8643]

it would be the same process but i use the simple key?

[@ozzstars_cars]

You need TWO programmed key fobs to program a third one, up to five total. You will need external key programming software if you only have 1 fob to start with.

[@steveyoung4639]

Why do you have 2 have 2 key fobs to program new key? Could you not just take one original key fob and repeat the step twice? I ask this cause I only got one key fob when I bought the truck.

[@ozzstars_cars]

With only one fob you will need a key programmer.

[@DriveShaftDrew]

great to know good job

[@ozzstars_cars]

Thank you Drew

[@SteveRobReviews]

Haha go to the Chevy dealer. I hope a for rep watches your vid . Easy to do so yes do it yourself.

[@ozzstars_cars]

I thought about emailing the link to Ford but can't find an email addy. I'm sure it would raise a couple of eyebrows over there with the experience I had ;-)

[@SteveRobReviews]

[e-mail].

[@willf3811]

Would it work if you only have one key?

[@ozzstars_cars]

No, a professional scan tool is needed with one key only.

[@jamiecollins228]

My truck came with only one key and fob. How can I still program a new key fob

[@ozzstars_cars]

As long as you have the scan tool equipment to program it.

[@valminnick5004]

@@ozzstars_cars What is the scan tool? I'm in the same boat! I just bought a Ford F150 from the Ford dealer and they wanted to charge me $599.00 for a second key! I kid you not! So now I need a back up key :)

[@ozzstars_cars]

@@valminnick5004 the Autel IM508 is a nice entry level tool that works great for programming most keys. amzn.to/3i4Ah7i

[@valminnick5004]

@@ozzstars_cars Thank you! 😊

[@Gunnypauly73]

Are you sure it will work for a 2018 F150? I couldn't get mine to program. My wife works @ the Ford Dealerships , and I asked a mechanic there, he said previous year Ford pickup trucks could be programed that way, but the new ones couldnt. $125 to program it

[@ozzstars_cars]

You are the first person to tell me that it couldn't be done on a 2018. Maybe some other folks can chime in. You do have the key type without push button start like the video discusses?

[@thepiratemorgan]

Can anyone confirm this procedure works with a 2019 F-150 ....thank you in advance!

[@jettschenker]

try it

[@twinenk15]

I picked up my 2016 F150 that came with the remote start keyFob that looks like the one you just programmed. But, the remote start no longer works with either key. The body shop had to disconnect the battery while they work on the body of the truck. How do get the remote start reprogrammed? Ford dealership charge $70 a key to reprogram the key. .

[@ozzstars_cars]

It may have been more than a battery that they disconnected. It should be the body shops responsibility to get the fobs working for you or ask the insurance company to program/repair if it was a damage claim. I can't tell you what the problem is sitting behind a keyboard, sorry.

[@twinenk15]

The body shop took care of it. Turns out to be a learning experience for them and me. Ford told them that some will have to be reprogrammed every time the battery is disconnected. If this is true, it sound like something is defective. Besides the key fobs what other hardware is involved?

[@Aronyeakey67]

How do you program a new key if I only have one preprogrammed key?

[@ozzstars_cars]

With a key programmer scan tool.

[@shark_plissken]

so basically they're like Infinity Stones.... and your Thanos

[@ozzstars_cars]

There are more Stones to be found Mark. ;-)

[@jeffthompson1478]

What is you only have 1 original key fob? I lost one... Can I still do this?

[@ozzstars_cars]

You can buy the fob and get the key cut but will need someone with the software to program it for you. Unless you just buy the software tool yourself.

[@jeffthompson1478]

I couldn't just do it the same way you did but just with 1 original key fob? You must have 2 originals to program a new one?

[@ozzstars_cars]

You need two programmed fobs to that vehicle, no need for them to be original, just oem.

[@BrandonSolid]

Wife lost 2018 f150 key including all of my old back up GM keys for my gbody cars and c20 pickup over the weekend. I dont think this will work for me since i only have one key fob for my Ford.

[@ozzstars_cars]

That is correct Efron. For the Ford you would need at least two programmed keys to add an additional key without using any expensive programming software. Missing keys is not fun.

[@BrandonSolid]

@@ozzstars_cars nope it sure isnt. Thanks for the video and the response. Enjoy your day👍

[@ronniemassart3834]

I only have 1 working key and want to program a 2nd.....what method for that

[@ozzstars_cars]

Need programming software.

[@ronniemassart3834]

@@ozzstars_cars Forscan and a laptop?

[@ButterNoToast]

It’s actually a 120 dollar machine. I have one I got on eBay and cut my own keys. Comes in handy after a few cars and keys

[@ozzstars_cars]

Is that right? Post a link here, I'd like to see it.

[@elgmac73]

do you know if I can just do it with one key ?

[@ozzstars_cars]

Like I said in the video two fobs needed to program without scan tool equipment.

[@Jazzhog]

@@ozzstars_cars What if the original keys were working and now the transponder won't read ? Both fobs open and lock doors but won't start vehicle. 2015 F450 NOTE: The starter and battery were replaced prior to any starting issues.

[@ozzstars_cars]

@@Jazzhog was the new battery programmed? It should have been, Ford battery management

[@Jazzhog]

@@ozzstars_cars Which battery are you referring to? The battery that was replaced on the F4500 was the one on the truck, along with the starter. There were no issues with starting the vehicle prior. The battery was replaced because it was 5 years old, the starter a bit noisy. I've never heard of a battery needing to be programed. Please explain

[@ozzstars_cars]

@@Jazzhog starting in 2011 Ford start using BMS.

[@michaelwong6411]

Thank you for your show To help me program my 2 keys ford f150 2015 it cost me $100.00. dealer say it cost my 2 keys $900.00.

[@naseresaurosales1456]

I have just one key and I need to program one more key. Can somebody help to me with the process please. I have a Ford F150 2013

[@ozzstars_cars]

You need a key programmer or scan tool equipment if you only have one fob.

[@bobhart4952]

This does not work for me. I don't have the remote start model. Is the activation different for a non-remote start?

[@ozzstars_cars]

I don't believe it is different but I have been wrong before.

[@SJSOmar]

Man I need two keys for everything on these fords I only have one cause I bought the truck at auction no way to program one with only one existing key ?

[@ozzstars_cars]

Yes, with the proper scan tool key programming capabilities.

[@ostfrontbrickace]

I tried that and it did not work, the new remote I bought was aftermarket, but I have 2 oem remotes

[@ozzstars_cars]

Most aftermarket is junk, go oem my friend. amzn.to/2pJHCiw

[@ralphburgess8274]

A HPC 8100 BG is about $1300

[@iamthewalkingdudefrank1483]

Ford just charged me 180 to replace the and said I have to go next door to the service department and they want almost 200 more to program the key fob.

[@ozzstars_cars]

The equipment is expensive. How many key did you have?

[@iamthewalkingdudefrank1483]

@@ozzstars_cars Hey, I only had one because I bought the van used and they didn’t have a spare. I’m in Brooklyn, NY and my van is a 2020 Transit E350. What happened was the hinge broke and the key fell out and I was using the fob to insert it then needle nose to turn the key. I only bought the replacement and I took apart the new key fob and put the new key with little hinge assembly into my working fob and all is good now, except I have this 180 dollar useles fob. Hopefully it lasts a while. And btw, the NY dealerships are criminals. They know they got you. They actually laughed at me when I said I figure out something because I didn’t want to pay to have it programmed by them for 200. I’m gonna make a video to help people with this type situation.

[@iamthewalkingdudefrank1483]

Good video by the way. I didn’t know I needed 2 working key fobs to program another, I gotta make some friends that are mechanics. And have to be careful with this key for now. Thanks Ozzman.

[@steveb3448]

I tried programming an remote start fob. It didn’t work, my current fobs are non remote starting

[@dbillionaer]

steve barker yea because your car doesn't have that option............

[@yehudagoldberg6400]

Your car needs the remote start antenna.

[@teamkotic1]

what if you only have one key fob?

[@ozzstars_cars]

Then key programming software is needed.

[@PinkZii]

I live in a small town, they’re charging me $50 to get it cut -_-

[@ozzstars_cars]

That is highway robbery!

[@antwanreallyknows]

I only have one

[@ozzstars_cars]

Need programming software.

[@mattgulian6009]

I was excited to do this until I realized you need two working fobs :/ , I got my F150 used and it only had one of the original fobs

[@ozzstars_cars]

Unfortunetly you will need programming software to add any additional fobs/keys with only one.

[@dennisromansoto4452]

I have the same problem, i only have 1 original key fob, recently i bought and second key fob on Amazon. Do i have to buy another one? Or have options to program the one that i already bought.?

[@ozzstars_cars]

@@dennisromansoto4452 you need key programming software

[@dennisromansoto4452]

Ozzstar's Cars thanks 👍🏼

[@PoopFrancis]

Get the third ASAP. Carry the third ONLY . Don’t be a dumbass like me and loose both your original keys and have to get your truck towed to the dealer!