P-Bandai HG RGM-79 GM [Moroccan Front Type] - UNBOXING and Review!

[@zeroxexe111]

I never forgive them for p-bandai-ing such an awesome GM😅

[@Hugh_Mungus756]

Tbf the normal one is regular release so at least we aren't missing out on much

[@riblo72]

​@@Hugh_Mungus756And the regular one has more accessories too

[@teknonaught]

i haven't forgiven them when they P-Bandai'd the GM Cannon (both Red AND Blue) , GM Sniper C, and ACT-Zaku.

[@elliottsaucedo442]

@@teknonaughtI wish that at least one of the GM cannons was a normal release. That would be more understandable. But i guess not enough people want a GM Cannon to warrant a regular release.

[@riblo72]

@@teknonaught it was a big disappointment for me too I got myself the FA-78-1 and the GM Sleggar Custom but i would buy more if they were regular releases

[@MixedBerryTea]

I'm always impressed with the level of detail you get with kits in the HG Origin line; really feel like a middleground between normal HGs and RGs.

[@fabiocorreia7532]

Gotta agree there!

[@heroedeleyenda05]

I actually prefer them to RG kits 1) they are more sturdy 2) color acuracy is usually better 3) easier to build 4) less loose parts 5) less parts that fall off 6) cheaper 7) come with more extra accessories. 8) easier to paint

[@jojj334Q]

Awwww....I misheard it as macaroon...now I'm hungry

[@infernas]

Mmm macaroons... 🤤

[@hippoace]

Nice...toe bends used to be only from RG. And finally Bandai listens to feedback for matching hand options left n right, esp trigger fingers

[@riblo72]

Many kits from the Origin line has knee separation and toe bend in the feet They are the best traditional HG kits

[@hippoace]

@@riblo72 yeah noticed alot of improvements on HG after RG came out...they trickle down the features... the level of engineering and thought given to the kits is profound.

[@asianpotatofarmer1310]

Can’t wait for the regular release of this kit I will get so much

[@oofootoofoo]

jeeze, we really need even more Origin style MG's

[@keideepabilonia4698]

hey man,I hope you’re doing okay these days. Thanks for doing these videos for the gunpla community. Shoutout from Ph.

[@curse.dmeme..3399]

You are from pornhub?

[@simpleanswer8954]

The P-Bandai FA-78 also had a nice set of water slides.

[@1996starter]

Finally. I actually like this and sleggar color over the regular gm color

[@miscinsanity]

all federation suits are improved by the addition of shoulder cannons, change my mind

[@1996starter]

Sadly they can't use them as nicely as the gundams

[@MiguelCuevas-m2y]

It kinda depends. Sometimes you need to add some modifications to really smoothen the additional of the cannon. I mean, look at the GM Cannon prototypes, they could barely fire and have the mobility of a standard mobile suit at the same time. It can usually be solved by adding some balancers or thrusters. There's also the battle scenario to take into account. You need to determine what type of battle your GM is fighting. I would not recommend a shoulder cannon in a close ranged saber fight.

[@talesj1987]

G Rework decal for this kit looks amazing.

[@GP01Zephy217]

Seeing waterslides in a HG kit is quite refreshing, iirc the last one I saw is from the HG Jegan Mount Cheyenne deployment type

[@JJTheSpartan_117]

Love the gm ground type colors

[@Brawler_1337]

Yes! This thing looks SO GOOD next to the GM Ground. I got myself a second one of these, and now I should get a second GM Ground so I’ve got a full Mobile Suit Skirmish squad of just these machines.

[@JJTheSpartan_117]

​@@Brawler_1337I have myself two of the ground gms, I wanna get this one to round off the team

[@Brawler_1337]

@@JJTheSpartan_117 Believe me, once you’ve got one of these, you’ll want another one. The build is superb, the articulation is as good as the Origin RX-78-02, and the detailing is top notch.

[@Phongphammmmm]

Thank god im not late to the party 😅. Started collecting GMs cause i kinda dig their design. Started with the Spartan now waiting for this

[@AndreaDoesYoga]

👍 Love the detailed review, can't wait to build mine! 🚀

[@albertcrimson2668]

Why this awesome and the Slegger GM are P-Bandai!!

[@First-Name_Last-Name]

I didn't preordered the morrocan front type and sleggar custom type but preordered the upcoming normal type (i think the upcoming normal one has missile pods and a single shoulder cannon, but does not have the short barreled rifle, can't remember).

[@riblo72]

The regular one not only has the same guns of the Moroccan but It has also the classic beam spray gun and the hyperbazooka

[@joshstreet6819]

This is the GM I've been waiting for from Bandai since they started the origin line. It is the Origin GM with it's backpack thrusters even the shoulder cannon and with both bream rifles (early protype rifle for the gundam and the GM early spray gun) if you go off the origin manga.

[@BianOka]

I ordered this one and exciting how its end, but when they announced the regular one with a lot of accessories are disappointing me, have no choice but ordered the regular one too and try to making this Moroccan version with dual cannon

[@seanswader7425]

I think the only thing I don’t like on these gm kits are the way the ankle armor connects

[@elliottsaucedo442]

Same

[@Coolio_Ash]

Orange, tan? Of course it's a kit you love it's your favorite color scheme! (I'm joking obviously)

[@TrueProphecy22]

I hope they reprint this soon. I regret passing on it.

[@Jhn-yl3xx]

Have you seen the new seed kits? will you make a video on it?

[@emilioaguirre1634]

Does the toe bend in the GM Shoulder Cannon as well?

[@irfan-6506]

would love to see you build this in stream

[@borgar1765]

kinda lost interest in this one once the retail version with more stuff was revealed, but it's still good to hear this one is great value for money

[@CsStrez]

Tbh the water slides are nice and I like the color scheme here(it's like an Origin version of the GM Ground Type).

[@Brawler_1337]

@@CsStrezYeah, these guys look so good next to a squad of GM Grounds.

[@TheLinkhawkins]

Would this be good as a first time gunpla? I did a few Zoids a couple decades ago but have not done model building since. This GM was brought to my attention through a Gundam Evolution skin, and I love it.

[@Brawler_1337]

This would definitely be a fine entry point into Gunpla. It’s definitely not as simple as some other High Grades or the Entry Grade line, but the end result is wonderful and feels almost like an action figure. But I would look out for the regular retail release GM that should be out about now. It’s in red and white, and it comes with all of these plus more accessories. It’s a bit on the pricey side for HGs, but all the customization options means you can outfit an army. If you want to stick on the budget side, though, the Entry Grade line is pure witchcraft. Everything is so simple and needs barely any cleanup whatsoever, and the end models are sturdy as a rock and can still pose with some of the best High Grades.

[@jonfoy6477]

Will you get the newest GM set? The one with the missile pods

[@ZakuAurelius]

I don’t think so~

[@huntergrant9690]

I wonder if the M.S.V. kit will be this kit recolored with a few different accessories or if it will have different molds.

[@First-Name_Last-Name]

Will there be a future MSV version of vanilla origin GM, or you're referring to the already released Sniper/Guard/Intercept Origin MSV ones?

[@affirmations94]

​@@First-Name_Last-Name Future MSV normal GM it got revealed like a few months ago, forgot when it's gonna be released but defo early next year

[@chrisbellon3739]

For p-bandai, the manual should be premium too haha

[@0Defensor0]

That orange color is quite suspicious... I can't tell for sure from a video, but if it's the same color that the Arios and the Harute use then it should glow under UV light.

[@jaskaranbajwa8443]

I'm pretty sure that for Gunpla at least, only most HGs don't get water slides from P-Bandai, every RG and MG I've got has gotten water slides

[@bradleyjones5932]

with this kit having pre painted parts , are you going to have trouble , when removing the nubs ?, will they not be another colour in the middle of the nub?

[@seanswader7425]

If you take care with the darker colors like the gray or the orange, they won’t show at all. I recommend cutting a bit further from the connection and trim down a little with some nippers, but not all the way. After that sand them down. I used a glass file from the beauty shop and it made quick work of the nubs and there were no marks at all. Just put in a little extra work with the file and you will have great results. The nubs are very tiny in most places and won’t be much of a hassle anyway. None of the parts are pre painted, just separate colors

[@vustvaleo8068]

I'd like to know how the people of Morocco react seeing their country getting wrecked and conquered by Zeon and the EF kinda sucked at doing their job defending the place, granted not as bad as Australia getting a space colony dropped at them, lol.

[@Davide-ki6iy]

I imagine gundams as alive robots . To me the idea that they are guided by humans is kinda ridiculous (Anime).

[@StudioWDOnline]

Does this GM come with extra head parts?

[@Brawler_1337]

It does not.

[@velocirock7421]

Does anyone know why this one is white and the one on p-Bandai is grey?

[@Error-ld3lt]

Probably lighting or the one on peeb is a render

[@Brawler_1337]

In person, it’s a very light shade of gray.

[@serpventime4690]

once they announced the gm origin. its enough of the reason to get grandaddy origin

[@Brawler_1337]

The funny thing about the GM kit is that it’s even more advanced than the Granddaddy Origin. The RX-78-02 uses a sticker for the crotch V. The GM color separates that part.

[@serpventime4690]

@@Brawler_1337 judging from side by side comparison photo, theres a chance the crotch parts can be interchangeable. hopefully this is the case.

[@Brawler_1337]

@@serpventime4690 I’ll check when I get home.

[@Geekeric]

P-Bandai: how to do great GMs and how to not do marketing or public relations.

[@CsStrez]

They are doing the regular Origin GM as a retail kit. It has even more extra parts, such as missile pods and the classic beam spray gun IIRC(in addition to the proto beam rifle and early/long spray gun)

[@ClampEEGEE]

I think my favorite thing about this kit is how it's a regular GM but it has colors similar to the GM Ground type. Such a shame that it's p-bandai.

[@Coffeeismyboy]

They have BL this one

[@elliottsaucedo442]

I wish they would stop putting the Gundam’s chin on all the other Federation’s suits. It doesn’t look too bad. But I just prefer the simplicity of a “battle mask” similar to Optimus Prime.

[@gopdrifto]

These new GM's are awesome, I just wish they didn't have that weird ground GM beak thing on the helmets

[@rogue_newtype4364]

I think you can shave them off I haven’t tried yet tho.

[@johnsouto5221]

Why does Bandai always make great looking models, but make them P-Bandai exclusives which makes them unavailable for the masses??

[@Unit_With_Legs]

I ordered one.

[@joyboynyan]

God I hate bandai for existence of p bandai