P&S Brake Buster application and dilution ratio.

Just a quick application and dilution ratio to show how P&S Brake Buster performs from a spray bottle and IK foam sprayer without agitation or scrubbing. Just a spray on and rinse off.
Agitation and scrubbing with the concentrate or diluted product will provide an even better finish to the wheels and tyre.
Available to purchase from Nestie Detailing.
P&S Brake Buster - nestiedetailing.com.au/produc...
P&S Tempest Degreaser - nestiedetailing.com.au/produc...
P&S Enviro Clean APC - nestiedetailing.com.au/produc...
IK Foam Pro 12 - nestiedetailing.com.au/produc...
IK Multi Pro 12 - nestiedetailing.com.au/produc...
IK Foam Pro 2 - nestiedetailing.com.au/produc...
IK Multi Pro 2 - nestiedetailing.com.au/produc...
IK TR1 - nestiedetailing.com.au/produc...
Wheel Woolies 3pc Kit - nestiedetailing.com.au/produc...
Tyre Scrub Brush - nestiedetailing.com.au/produc...
Detail Factory Boar's Hair Brush - nestiedetailing.com.au/produc...
Detail Factory Synthetic Brush - nestiedetailing.com.au/produc...
Wheel Woolies Wheel & Body Brush Long - nestiedetailing.com.au/produc...
Wheel Woolies Wheel & Body Brush Short - nestiedetailing.com.au/produc...
Soft Grip Wheel and Body Brush - nestiedetailing.com.au/produc...

[@muhammadalli4665]

I've tried a lot of different products and now I use only P&S . Bead maker, brake buster, iron remover and express interior cleaner are the best in the world. Very efficient and not expensive.

[@nestiedetailing3535]

Well said, P&S make fantastic products

[@cebasmb8250]

I love me some P&S

[@EsenbekAliev_]

Do you think 5:1 is as good as full strength? obviously last one is better, but for a sake of saving the product, will it still be strong enough ?

[@nestiedetailing3535]

Hi, no, the 5:1 is not as good as full strength. Full strength will always clean better. But if you are using it to remove light dust where a wheel is not so dirty the 5:1 will be strong enough to clean that up and have your gallon bottle last longer.

[@KingRockets]

For the IK sprayer, do you prefer using it as foam or just a regular liquid spray?

[@nestiedetailing3535]

Hi KingRockets, thanks for the great question. I prefer the IK Multi Sprayer or a Trigger bottle Sprayer (not the IK Foam Sprayer).. a wet solution is better to penetrate and break down the grime and have it run off the rim and tyre. a dry foam will not penetrate and break down the grime.

[@KingRockets]

@@nestiedetailing3535 Very good point. Have not seen this being discussed before. Almost everyone I have seen it use on KZbin recommends the foam sprayer. I suspect this is more for the cool/ visual effect.

[@nestiedetailing3535]

@@KingRockets Yeah there is a misconception about foam.. yes it is cool for social media pictures but for real world cleaning abilities its no good.

[@s.b.c.1950]

@@nestiedetailing3535 finally a youtuber with brain.

[@nestiedetailing3535]

@@s.b.c.1950 eheheheh Thanks mate... I have some video's that I want to do and a proper in depth wheel cleaning video explaining a few different things, but just can't find the time to get it done at the moment unfortunately.. This video was just something I quickly did as I had a customer wanting to know how this works as a spray on and rinse off without any agitation.

[@CarlosHernandez-gc6no]

Hey Nestie, how do you wash all of your detailing kit after a wash?

[@nestiedetailing3535]

Yes, give the wheel brushes a rinse out 🙂

[@j-sonS]

I'm a brake buster fan

[@nestiedetailing3535]

So are we, it's fantastic

[@meanf1502]

Is the break buster safe for the anodizing on my wheels

[@nestiedetailing3535]

Hi, It certainly is. Break Buster is a water based wheel cleaner. Safe on all wheel types

[@Capone10469]

Soif you did 5:1 in foamer what was the ratio in the regular spray bottle if you mind me asking. I did 5:01 in a chemical guys duck spray bottle

[@nestiedetailing3535]

Hi, was 5:1 in the left spray bottle and full strength in the right spray bottle for a comparison..

[@Capone10469]

@@nestiedetailing3535 much appreciated

[@VicTITS]

@@Capone10469 did it still foam out the chemical guys sprayer. I ask cause I have the same sprayer and now you got me wanting to put it in it

[@Capone10469]

@Victor Ayala yes it foams out fam. Definitely a well worth buy

[@MrParmigianoReggiano]

Is this safe for matte graphite wheels ?

[@nestiedetailing3535]

Hi J B, It absolutely is, it's a water based cleaner so it's safe on all rim types..

[@ryankalbfleisch3321]

No problems with discoloration or anything?

[@nestiedetailing3535]

Not at all, its fantastic. I have actually had customers come to me with faded calipers from other products that they have used and the Brake Buster actually cleaned and restored color back to them... I have before and after photo's of this..

[@chawin007]

If used as foam without dilution Will it be as strong as a liquid spray with no dilution?

[@nestiedetailing3535]

When being used out a spray bottle (wet solution) will work better, penetrated better, than from a foamer.

[@chawin007]

@@nestiedetailing3535 thanks

[@CarlosHernandez-gc6no]

So which one is better to use, 5:1 or full strength?

[@nestiedetailing3535]

Full strength

[@CarlosHernandez-gc6no]

@@nestiedetailing3535 And it won’t wear off the tires or rims?

[@nestiedetailing3535]

@@CarlosHernandez-gc6no not at all, it's water based and super safe.

[@RaylinAquino_]

For trigger bottle is strong a 5:1 dilution?

[@nestiedetailing3535]

No, that's not a strong dilution ratio. That is an okay ratio for maintenance washes. Full Strength is strong and good to clean really dirty wheels and tyres.

[@RaylinAquino_]

@@nestiedetailing3535 thanks man

[@nestiedetailing3535]

@@RaylinAquino_ you are welcome ☺️

[@_________4062]

your wheels have Plasti dip?

[@nestiedetailing3535]

Hi, No, they are painted.

[@waxmanvids5015]

so whats your favorite dilution and application method?

[@nestiedetailing3535]

Full strength is always nice, it cuts straight through the build up. 5:1 for light duties. I like it through a spray bottle or IK Multi sprayer (not IK Foam sprayer).

[@waxmanvids5015]

@@nestiedetailing3535 just ordered a second ik sprayer.. love it might use bal in it

[@nestiedetailing3535]

@@waxmanvids5015 Yeah they are pretty cool sprayers..

[@Ap-tq7zi]

So what’s the dilution ratio for full strength use ?

[@nestiedetailing3535]

use straight out of the bottle of a 1 gallon or 5 gallon, no water added.

[@Ap-tq7zi]

@@nestiedetailing3535 ok thank you

[@ggcub25]

For dilution it must be distilled water?

[@nestiedetailing3535]

Hi, just tap water is fine

[@MikeBee77]

I think is best to use distilled water… it helps by creating more suds and who knows, less clogging the IK foamer filter, no calcium and build up.

[@brokenSnake]

If you use a foamer, it's almost impossible to use full strength. I find 1:10 works best to foam thick

[@nestiedetailing3535]

Depends what jet you are using with the foamer. The IK foamer comes with three to choose from for your desired foam level.