P-Trap Installation: Drain Doesn't LINE UP with Bathroom Sink Pipe - 2022

  Рет қаралды 1,385,833

The Building Expert

The Building Expert

Күн бұрын

Пікірлер: 426
@Peter-.H
@Peter-.H 2 жыл бұрын
Well! No nonsense, straight to the point. This must be the best tutorial video i have seen in a long time. I subscribed 👍 Thank you .
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Glad it helped, thanks.
@jinglingbabygarage7030
@jinglingbabygarage7030 2 жыл бұрын
Very nice, just what I need to fix my offset! Thanks
@victorn4745
@victorn4745 2 жыл бұрын
Agreed. Thanks!
@queennefertiti35
@queennefertiti35 Жыл бұрын
Agree
@ricardohuertas1805
@ricardohuertas1805 Жыл бұрын
O
@603storm
@603storm Жыл бұрын
Meanwhile, in my world…..go to home center and discover they don’t have all the needed pieces in ABS or PVC, buy many elbow combinations of each, go home, still doesn’t work. Go back to home center, buy more stuff, repeat 4 more times, cut multiple lengths of pipe to make everything fit because the first 3 pieces were too long or too short. Take a break for dinner. Make sure no one uses the sink. Still doesn’t fit. Go back to home center and buy multiple universal kits with the bendy hose.. jury rig everything together , check for leaks, redo do 2 more times because there are leaks, tighten every connection just short of failure, no leaks, stand back and admire a job well done.
@joeaverager
@joeaverager 10 ай бұрын
Add in drive 70 miles round trip b/c the local Lowes doesn't have the same plumbing selection that the one in the next town does. Still not sure I have everything I need to make it work. I could order it from them but it won't be here for 5 days unlike the auto parts store which can usually have things for me within 24 hours...
@skdzone6779
@skdzone6779 8 ай бұрын
I resent you talking about me 🤣😂first bathroom problems😉
@ONE_22
@ONE_22 7 ай бұрын
🤣🤣 So true! A 15 min home project always takes 8 hrs.
@WhiteDoberman
@WhiteDoberman 6 ай бұрын
Same
@nedergubis2638
@nedergubis2638 3 ай бұрын
Same here😢
@MrKbsweeney
@MrKbsweeney 2 жыл бұрын
If this is really for beginners then I would recommend dry fitting everything before glueing a single piece. But a nice video. Well paced and easy to understand.
@rayray8687
@rayray8687 Жыл бұрын
Dry fitting can be difficult on friction-fit joints as they won’t always bottom out until they’re wetted with glue. You’ll probably end up cutting too short for a full fit. Better just to trust your tape.
@stevelopez372
@stevelopez372 Жыл бұрын
@@rayray8687Yes simply measure depth of socket for good measurements. If you dry fit don’t forget to glue all of the joints,lol.😊
@alanpecherer5705
@alanpecherer5705 2 ай бұрын
"recommend dry fitting everything before glueing a single piece." +1000
@bluesky11187
@bluesky11187 2 жыл бұрын
I’m a 60 yr woman, beautiful explanation, and yes I did it ,
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Glad it helped. Thanks for your feedback
@bugpack6
@bugpack6 11 ай бұрын
Great video. And finally someone understands background sounds that help you focus. Thank you.
@Francog413
@Francog413 2 жыл бұрын
I'm helping my Mom out by installing two new vanities and sinks that are both smaller and offset from the old ones she had. This is the exact problem I wasn't exactly sure how to fix properly. This gave me all the confidence I needed to get it done! (Not a plumber. Just handy with things and a Son trying to help his mom save some money) Thank you for this excellent tutorial! Love it.
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Glad it helped. 👍
@aaronbaraiya3692
@aaronbaraiya3692 2 жыл бұрын
how did the install go?
@Viking74256
@Viking74256 2 жыл бұрын
I work at Home Depot plumbing department and at least couple times a week I have to explain this very process to DIY customers, some understand it right away others I have to go over and over and over this process. Great video 👍🏻
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Show them our video next time. Thanks for your comment.
@brandonbell5357
@brandonbell5357 Жыл бұрын
Keep going over it why you get paided just saying
@DMcBoo2002
@DMcBoo2002 Жыл бұрын
I probably don’t “like and subscribe” as often as a should, but this tutorial was so clear and straightforward, I had to. Well done, sir.
@ralphriffle1126
@ralphriffle1126 Жыл бұрын
Hope everyone noticed he used a " 1 1/2 " trap with a ground joint union. Well done
@KpxUrz5745
@KpxUrz5745 2 жыл бұрын
Excellent demonstration. This is needed on most sink jobs and sometimes surprisingly frustrating to resolve.
@pcm7315
@pcm7315 2 жыл бұрын
That would have taken me all day.
@rayray8687
@rayray8687 Жыл бұрын
@@pcm7315: Don’t take up plumbing then, lol. This was actually the easiest situation you’ll encounter.
@pcm7315
@pcm7315 Жыл бұрын
@@rayray8687 Only if I get paid by the hour. 🙂
@pcm7315
@pcm7315 Жыл бұрын
@@rayray8687 Only if I get paid by the hour.
@cbereal
@cbereal 15 күн бұрын
Perfect video. Spent hours trying to make parts who egg knuntil Ii found your video. I had all but the 1-1/4"-1-//2" adapter. Thank you for sharing.
@signsofautumn1
@signsofautumn1 2 ай бұрын
I love the simplicity of your instructions. For a female without knowledge, it helps me to understand the instructions better when there’s not a lot of useless talking. Thank you
@shannond2707
@shannond2707 2 ай бұрын
This is the best, most straightforward video explaining this process that I've found. Thank you very much for sharing!! You probably just saved me HOURS of struggling 👍🙂
@JonathanKelley
@JonathanKelley Жыл бұрын
On top of the great content (exactly what I needed), I really enjoyed the calmness (and music) and simplicity of your presentation. Too often videos are amped up and this was a delightful change. Subscribed!
@anyone150
@anyone150 2 жыл бұрын
Certain portions of plastic pipes are threaded to allow you to tie one segment to the next. This eliminates the need to glue one part to the next which is best avoided if possible. It will make it easier to take apart and reassemble if you need to clean out debris causing the drain to clog.
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Trap adaptor and union Ptraps make it easy to take apart for cleaning or maintenance. Because trap 90 is glued to the trap arm, line clean out is installed for drain cleaning. Thanks for your comment.
@SosaTV
@SosaTV 2 жыл бұрын
EXCELLENT video. I've never had to deal with a 2" black pipe coming out of the wall like this before where any glueing of pieces was involved. Old house, new "opportunity" for learning I guess. This video was amazing!
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Thanks for your feedback
@michaelkaye4998
@michaelkaye4998 2 жыл бұрын
Can you comment on why you used a trap adapter between the sink and trap instead of the standard tail extension with nut?
@brandonbell5357
@brandonbell5357 Жыл бұрын
It doesn't line up
@TheSpatulaCity
@TheSpatulaCity 2 жыл бұрын
Not bad. The only thing that bugs me is that you didn't ream the inside of the cut pipes to ensure smooth flow. Little jagged ABS pieces can easily cling onto hair and start to cause clogs over time.
@rayray8687
@rayray8687 Жыл бұрын
That bothered me too.
@neli.a
@neli.a Жыл бұрын
Did he glue the p-trap? 😮 Doesn’t that defeat the whole purpose, ie to remove and clear clog or obstruction?
@petemiller519
@petemiller519 Жыл бұрын
That bothered me three. I am not a pro, but I would install some cardboard on the bottom of the cabinet to prevent drips. I liked how he gave the bottle of glue a little tilt to get glue on the brush. He must have done thousands of sinks. Good video, don't mean to be picky. Cheers.
@Faruk651
@Faruk651 Жыл бұрын
@@neli.a The p tap has a threaded connection. You can always unthread the p trap and tail piece than take the p trap out to clean.
@stevelopez372
@stevelopez372 Жыл бұрын
@@neli.ano, it has unions for easy removal and cleaning. Accessible P traps are never glued! Well usually not, Lol.
@theStarkArts
@theStarkArts 2 жыл бұрын
Love the soothing music. Forgot i could chill out while I'm doing this
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Haha! Glad you liked it.
@michelsavoie6971
@michelsavoie6971 3 ай бұрын
When you cut the abs pipe, and you removed the burrs on the outside with your glove, did you remove the burrs on the inside? Those burrs will clog things up with hair.
@sven8957
@sven8957 5 ай бұрын
Very well done video! No wasted time, and no quickly skipping over the essential material. 👍🏆
@lovera3878
@lovera3878 Жыл бұрын
Straight to the point. I am presently facing this situation and you answered my question simply and easily. Off to Home depot for that 45. I was not aware of the slope requirement. Thank you
@bradybarker7933
@bradybarker7933 Жыл бұрын
How much did he say the slope has to be?
@acreguy3156
@acreguy3156 Жыл бұрын
@@bradybarker7933 1/4 inch to the foot I believe.
@tagnut1952
@tagnut1952 Жыл бұрын
@@bradybarker7933 1/4" per foot when using 1 1/2" pipe.
@timventura
@timventura Жыл бұрын
Great video. After watching it I have complete confidence I can do it without screwing it up. Thank you!
@obey325
@obey325 2 жыл бұрын
Amazing video. You went over every single thing I needed to know. It’s also awesome to watch a professional at work, you make it seem so easy! As a DIYer I like how you held both pieces in one hand and the glue in the other. Will definitely do that next time instead of fumbling everything around since I don’t have a method lol.
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Glad it was helpful!
@richardkelleher1711
@richardkelleher1711 Жыл бұрын
Thanks, you saved me a bunch of grief. The new rough in put the drain line more than 5" offset from the drain, I'm not sure why they did it that way, they had the utility sink for reference. I was trying to find fittings that would reach that far and had not considered using a bend to make an offset.
@TheBuildingExpert
@TheBuildingExpert Жыл бұрын
Glad it helped!
@MrBogushogus
@MrBogushogus 4 ай бұрын
Great, it worked perfectly the first time right down to buying all the correct parts
@davidruiz5383
@davidruiz5383 9 ай бұрын
your video is well explained but I was not aware of the slop. and most, you demonstrated a drain that is not in line with wall outlet and the p-trap connection.; that is very common. thanks and God Bless
@daveyjones7391
@daveyjones7391 4 ай бұрын
Excellent video. Clear, concise, and easy to understand. Thumbs up from a new subscriber.
@stevelopez372
@stevelopez372 Жыл бұрын
Drains being offset from the sink are most common, even in newly built homes. But it is not a problem as you can see by this informative video.
@wc6975
@wc6975 Жыл бұрын
very good video with great explanation and workmanship. nice dry fit process to align the offset drain to the sink. thank you.
@sunfiregirl9927yaho
@sunfiregirl9927yaho Жыл бұрын
Thank you for making these videos. Saves me a lot of money so I don't make someone else Rich and rob me blind.❤😊
@daringdarius
@daringdarius 2 жыл бұрын
Good work, straight to the point.
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Thanks
@rajtyagi7509
@rajtyagi7509 Жыл бұрын
Good Job. Very easy Illustrations.Thanks alot.
@bykycil
@bykycil 6 ай бұрын
Excellent video and very diligent work ethics. I appreciate your hard work, time, and dedication. 🙏
@608_rich
@608_rich 2 жыл бұрын
Nice clear explanation. Thanks for posting.
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Thanks for your feedback.
@blackhorse2947
@blackhorse2947 2 жыл бұрын
If I want to drain a shop sink directly outside do I need a drain trap or can I just attach 45 to the bottom of the sink, two inch hole in wall and drain ?
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
I wouldn't recommend draining a sink outside, if you're allowed to do so, I would still install a P-Trap. It will block the passage to the sink inside from any kind of smell or insects. Thanks
@blackhorse2947
@blackhorse2947 2 жыл бұрын
@@TheBuildingExpert Thank you for your honest answer. It gives me other ideas
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
@@blackhorse2947 glad it helped.
@johnberriman3567
@johnberriman3567 Жыл бұрын
Amazingly well done and just what I needed. Thank you!
@ck-4203
@ck-4203 11 ай бұрын
Great video. So I have the same offset issue where a 45 is needed but with PVC. So could I do this by building out from the sanitary T as follows: 1) sanitary tee, 2) stubout, 3) street 45, 4) marvel connector, 5) PVC ptrap kit, 6) sink drain tail? Thanks!
@t-mach5504
@t-mach5504 Жыл бұрын
Min Min you sure know how to do it!!! Just gorgeous! 💖😘💖😘💖😘💖😘✨✨✨✨
@jergervasi3331
@jergervasi3331 25 күн бұрын
Definitely a pro at work. Thanks!
@fatimamohammed731
@fatimamohammed731 Ай бұрын
thank you!! chasing yucky p trap smell and i think the weird p trap in my new house is not ideal + clogged. i'm going to try to replace the p trap using your guide. the drain doesn't line up with the sink outlet and i think the plumber set up something weird.
@ThinkerTinker74
@ThinkerTinker74 Жыл бұрын
Great background music choice. Gives an interesting atmosphere 😊
@lynnepierce3676
@lynnepierce3676 2 жыл бұрын
Thanks so much😊 This is very helpful. Solves leakage problem I was having under kitchen sink👍😊
@thenexthobby
@thenexthobby Ай бұрын
I have one sink where the last guy apparently aligned it in one step ... with a heat gun. It looks horrible and burned but does not leak. I'll be using your method.
@noahdecoteau6381
@noahdecoteau6381 2 жыл бұрын
A contractor that did my new vanity install "fixed" this problem by adding an s trap directly below the drain and having that go to the old p trap. I'm tired of it clogging so I'll have to give this a try
@Lakestir
@Lakestir 5 ай бұрын
Thanks, this really helped me fix my sink faucet thingy.
@glennirwin4710
@glennirwin4710 Жыл бұрын
Best offset plumbing video!
@Boymandudeguy
@Boymandudeguy 2 жыл бұрын
Perfectly informative video and very pleasant music. 10/10 new sub.
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Thanks.
@honeyg3589
@honeyg3589 2 жыл бұрын
Holy moly! Super helpful!
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Thanks.
@judyb4288
@judyb4288 7 ай бұрын
@@TheBuildingExpert my drain seems more complicated than this and did not come with a towel piece so I’m having a hard time finding the extensions to fit the modification
@martinmazukiewicz
@martinmazukiewicz Жыл бұрын
Dealing with that problem now. Very usefull video ! THANKS !
@arturotorres6437
@arturotorres6437 Жыл бұрын
As others have mentioned, great video tutorial that is straight to the point! This is my first video of your channel that I have viewed, and if the others are like this, then you just gained a new subscriber! Thank you for making quality videos !
@tellfile
@tellfile 10 ай бұрын
How would you get it all apart in the future?
@Harleyguy03
@Harleyguy03 Жыл бұрын
Very informative tutorial, loved it. Background music......not so much. L0L. subscribed.
@youknowcrimedontpay9257
@youknowcrimedontpay9257 Жыл бұрын
Excellent job. Plenty of education in this video. Just subscribed and so should you!
@sivucit
@sivucit 2 ай бұрын
hi, i have simialr situation do u think 45 would do , or have to go with 20 etc, i am bit confused that we have 45 20, 60 etc. apprecaite if you can advise me when to use 20 or 60 .. i am clear on 45 and 90 by the way
@joeblow9284
@joeblow9284 2 жыл бұрын
What is that capped pipe in the wall under the drain pipe??
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Line Cleanout.
@rostamr4096
@rostamr4096 Ай бұрын
This was excellent and very helpful. Thanks
@DaveKarl
@DaveKarl 2 жыл бұрын
Why are you gluing everything together instead of using plumbers tape? Surely glue makes it impossible to disassemble later if you need to?
@stephenkromidas573
@stephenkromidas573 Жыл бұрын
What is the square plug on the wall? Can that be removed if you need to use that instead of the drain above? If so, how do you remove it, and can you swap the plug between the two?
@mikeike7114
@mikeike7114 25 күн бұрын
Hi. Why did you add a 1/4” slope? What’s the purpose? And is that requied to do, or not? Thank you.
@videobird111
@videobird111 10 ай бұрын
What determines whether you would use ABS or PVC, is it the drain pipe? Also, are there benefits of one vs. the other?
@manorhillmusic4285
@manorhillmusic4285 2 жыл бұрын
Why don't u use a ratchet cutter instead for cleaner cuts?
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
It’s just personal preference. I also use rigid ratchet pipe cutter.
@gayledeswert2727
@gayledeswert2727 10 ай бұрын
Hi. I can't find the 45 angle that fits on the drain pipe you are showin. When I type in 45 degree it gives me a larger elbow looking one. Would you be able to tell me the exact name of that small piece?
@ks3788
@ks3788 2 жыл бұрын
I thought people were moving away from abs ? Also I have to make new p trap design for my sink which was built in the 90s. how do i tell tis abs or pvc. the writting on the side verse not? or plastic apperance?
@miriamreyna3879
@miriamreyna3879 10 ай бұрын
Hi what type of glue is used? What other tools are options to cut the pipes? I’m going to have to buy something to do that and I am looking for the least expensive option.
@wric01
@wric01 Жыл бұрын
Oscillating tool a must have, saw not used often as this useful tool.
@kathrynnewillhoite4342
@kathrynnewillhoite4342 3 ай бұрын
Would this work with a trap where the pipe exits through the floor instead of the wall?
@tommycorbet
@tommycorbet 8 ай бұрын
I have to preassemble and paint marker the pipes. The order that you glue I guess makes a difference.
@allanbaldawi4896
@allanbaldawi4896 2 жыл бұрын
Great video, thank you very much, it was most helpful and achieved the best outcome, God bless!
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Glad it helped
@heretamanui21
@heretamanui21 3 ай бұрын
How would you put a garbage disposal to these sinks?? I really like them but I havent seen one yet with a garbage disposal or seen a video to add a garbage disposal to these sinks. Most house in the U.S have garbage disposal in the kitchen sinks. Please could you explain how to add a garbage disposal to these waterfall sinks!! Thanks
@Шурча
@Шурча Жыл бұрын
Здравствуйте ! Подскажите , почему у вас все соединения проклеиваются клеем, а не на резиновых соединениях ? У вас в стране свой стандарт ?
@weakcannow
@weakcannow 2 жыл бұрын
Great video man But I really need your help I wanna ask some questions If you could respond before this day is over with Today is August 28th please sir
@2nostromo
@2nostromo 2 жыл бұрын
This is exactly my problem. I'm so inexperienced I didn't know 45bends are available. Back to town again tomorrow. Oh right, can I borrow your reciprocating saw? And extra batteries. And a 6-pack of Speights, ta. 12pack I mean.
@dianadyer2523
@dianadyer2523 Ай бұрын
The pipe coming from my wall is level with my wall.what piece do I buy to extend it out .the wall pipe is medal .Can pvc pipe be the extender if so how does the pvc extender attach to the metal pipe? I am.in desperate need to get mine done.Ive tried everything and nothing works.
@gailvasey4296
@gailvasey4296 2 жыл бұрын
Great video! Having a problem with the threaded end of the p trap leaking. Teflon tape, pipe dope or silicone seal? What do you suggest?
@Manpant86
@Manpant86 2 жыл бұрын
Great video!!!
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Thanks.
@markdemay2177
@markdemay2177 2 жыл бұрын
Hello what's the chain under the sink. Is that to reinforce the underground sink. If so what is it and where purchased
@daboys1215
@daboys1215 Жыл бұрын
I need to do this except for the 45 degree piece at the wall. Can I cut the arm that sticks out of the wall and use a hub coupling to use another straight piece to connect with my new ptrap. The threads on the arm and new trap don't match so I'll have to cut. Ugh!
@you2tooyou2too
@you2tooyou2too Жыл бұрын
He used a 45deg because that pointed the pipe in the general direction of the trap (which can swing around for about a 10" range of position. If the drain were closer to the wall, and further away from the wall pipe, he could have used a 90deg, and of course if it were closer than 5", he would not have needed a bend at all.
@miscsilliness
@miscsilliness 10 ай бұрын
Great video, thank you. Subscribed, liked and saved to favorites.
@bubunelu7027
@bubunelu7027 Жыл бұрын
I have a threaded copper drain pipe coming out of the wall. How do I connect that to my sink drain made out of ABS just like yours?
@TheBuildingExpert
@TheBuildingExpert Жыл бұрын
You need an ABS DWV Female Adaptor for copper to ABS Transition. Hope this helps.
@LankanBloodz1
@LankanBloodz1 2 жыл бұрын
I loosened the union at the threaded connection to clean out the pipe, but the two pipes are stuck. Any suggestion?
@baljeetsinghsodhi3598
@baljeetsinghsodhi3598 8 ай бұрын
Manveer good one as well . Thumbsup.
@Frankie433
@Frankie433 Жыл бұрын
See you put cement on both sides. Yesterday my worker was only putting on one side, saying its the same. Now I'm going to show him this video 🍾
@joeditta7792
@joeditta7792 Ай бұрын
Only video I’ve seen where “ slope” is mentioned, very important.
@rhabdob3895
@rhabdob3895 2 жыл бұрын
Thank you sir. I was about to have an ulcer over this exact issue.
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Glad it helped.
@michaelhall6930
@michaelhall6930 7 ай бұрын
Very well done vid. Thanks
@atomicorang
@atomicorang 2 жыл бұрын
You helped me big time Ty
@alabaster4263
@alabaster4263 Жыл бұрын
If i need a tailpiece how high should it be above p trap?
@creativesuit1930
@creativesuit1930 2 жыл бұрын
Just something for people to keep in mind you're only allowed a 135゚ Worth of fittings on the trap arm before it hits the stack. And never use a 90゚ fitting unless it's long sweep. You can also use a street 45 in a regular 45 to make a 90゚ fitting that's a little smoother.
@jgz6989
@jgz6989 2 жыл бұрын
I imagine any glued pieces can now only be cut off.
@creativesuit1930
@creativesuit1930 2 жыл бұрын
@@jgz6989 Depends how long ago it was glued. If it's pretty fresh you can twist em out with a pipe wrench or by hand. Also if you're careful you can pick the fitting. For a ptrap I would probably just re pipe it. Not exactly sure what the situation you're referring to is?
@rainerrain9689
@rainerrain9689 2 жыл бұрын
What's a Long Sweep? Thanks.
@creativesuit1930
@creativesuit1930 2 жыл бұрын
@@rainerrain9689 Just has a wider turn so it flows more easily.
@jgz6989
@jgz6989 2 жыл бұрын
@@creativesuit1930 I'm not a plumber, it just struck me the way he was glueing every piece. None of pieces under my sink are glued...for me it's more convenient to maintain.
@blackhorse2947
@blackhorse2947 2 жыл бұрын
Great info…THX
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
Thanks for your feedback.
@JhunAva
@JhunAva 2 жыл бұрын
Wow... I need to show this to my hardware store.
@AmosAmerica
@AmosAmerica 2 жыл бұрын
This is great! Thank you.
@GaryYoung-eq1ph
@GaryYoung-eq1ph Жыл бұрын
Do trap size matter ? Smaller u shape better?
@kevinchen3994
@kevinchen3994 11 ай бұрын
Nice work, but didn’t think of future maintenance. It’s wrong that you glued the 90 to the 45 and the 45 to the wall pipe. When there is clog, it’s hard to unclog using a snake machine because the 90 is facing downward. One of the joints should have used a thread/removable adapter.
@TheBuildingExpert
@TheBuildingExpert 11 ай бұрын
There is a line Cleanout installed. Thanks for your comment.
@schoi7045
@schoi7045 3 ай бұрын
You are right, ours can't use a snake because the 90 degree elbow adapter. it should be disassembled.
@ibgeorgeb
@ibgeorgeb 2 жыл бұрын
Excellent! Thank you. 👍🏾
@TheBuildingExpert
@TheBuildingExpert 2 жыл бұрын
You're welcome!
@donaldy6able
@donaldy6able 2 жыл бұрын
Exc instructional video thanks for posting
@RichardDeponte-r6o
@RichardDeponte-r6o Жыл бұрын
Can you take 1/12 pipe from wall reduced it to 1/14 from sink
@kleinhurr
@kleinhurr Жыл бұрын
the P trap used is made of what material? also, can you elaborate more on how to check for slope?
@you2tooyou2too
@you2tooyou2too Жыл бұрын
The sewer gas/water trap is the same material as the rest of the plumbing. Slope is measured as well as you can: just use a level touching the bottom of the lowest point of pipe in the horizontal run, and for every foot of pipe upstream, the bottom of the pipe should be 1/4" higher. Here, he only had about one foot of horizontal run, before it turned vertical.
@kleinhurr
@kleinhurr Жыл бұрын
@@you2tooyou2too thansk a lot .
@samiquresh5294
@samiquresh5294 Жыл бұрын
very informative video, very well explained.
@tequilalane6033
@tequilalane6033 5 ай бұрын
What is the short piece called connected to the wall. I broke that piece off and I have the rest of the kit from a local store for $12. It didn’t come with that short piece 😢
How to Connect a Bathroom Sink Drain
10:33
Pros DIY
Рет қаралды 668 М.
How to replace your sink drain like a plumbing PRO
10:53
Roger Wakefield Plumbing Education
Рет қаралды 12 М.
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
GOOD P TRAPS, BAD P TRAPS, AND FUNKY P TRAPS!!
8:43
That Fix It Guy
Рет қаралды 179 М.
How To Connect a Kitchen Sink Drain - 2023
9:19
The Building Expert
Рет қаралды 865 М.
How Do P-Traps Work? 5 Drain Issues to Watch Out For
6:58
LRN2DIY
Рет қаралды 273 М.
10 Reasons Why You'd FAIL a Plumbing Inspection! | GOT2LEARN
7:36
LOOSE and LEAKING Plastic Bathroom Sink Drain Repair
6:35
That Fix It Guy
Рет қаралды 545 М.
Plumbers Hate Me For Showing You This!
23:28
Fix This Build That
Рет қаралды 571 М.
How to Plumb a Drain -  Sink Drain Pipes
4:50
Phil Crockett
Рет қаралды 1,9 МЛН
92% of Homeowners Use Teflon Pipe Tape Wrong - Here's Why it Leaks
5:33
Silver Cymbal
Рет қаралды 4,3 МЛН
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН