P0107 Manifold Absolute Pressure Sensor Circuit Low Input| Mitsubishi Triton

DTC P0107: Manifold Absolute Pressure Sensor or MAP Sensor Circuit Low Input.
Possible Cause: Failed manifold absolute pressure sensor
: Open/short circuit or harness damage in manifold absolute pressure sensor circuit or loose connection.
: Vacuum leak
: Failed engine-ECU
Thanks for watching, please leave a comment and Subscribe to our KZbin channel it is really help us to continue making great videos.

[@MarioCamagay]

Sir,may PO501FAULT.. SPEED SENSOR LOW INPUT ang Mitsubishi Strada 2017 model 4n15..paano po e check ang sensor at saan po nakalagay?salamat po sa sagot.God Bless po

[@autofixgarage5438]

Sir ask ko lang yan ba tamang fault code P0501?

[@MarioCamagay]

Galing na Ako sa Mitsubishi casa ni reset nila pero bumalik parin ang check engine sign.

[@autofixgarage5438]

Anong fault code sir P0107 din ba?, babalik talaga kung hindi nila natriger yung problema. fix it right at first time.

[@RichieRich845]

👍Hi sir, my Triton 2015 1N14 126000km RPM at idle 650 and target value is 650 RPM, when I rev the engine and let go the rpm drops to 625 RPM and feels like it is going to stall and then comes back up to 650 RPM and idle there at 650 until I rev the engine again. When in P or N and the AC is on at idle and cycles between ON and OFF RPM goes to 900 drops to 625 and the comes back up to 650. Has a little rough idle but when driving it is smooth and responsive. No DTC, MAP sensor and hose good, MAF good, throttle body good and clean and replaced recently, EGR test using OBD2 Actuator test. When driving and AC is off when coming to a complete stop same thing happens down to 625 RPM. Any clue or advice you can help me with would be much appreciated 🙏. Thanks. Rich

[@autofixgarage5438]

Try to clean injectors sir if you have injector cleaner for diesel engine if you don't have it remove injectors for calibration, I had video for injector cleaning for diesel engine.Do compression test too.

[@RichieRich845]

@@autofixgarage5438 thank you for the reply, sorry I forgot to mention I did do injector cleaning with Liqi Moly Purge cleaner . and replaced fuel filter, compression is good. I have a guess that it could be EGR valve stuck open, what do you think, is it a big job on this engine and you have a video on cleaning testing EGR? Thank you.

[@autofixgarage5438]

@RichieRich845 it is easy to clean egr valve,I have a video how to remove and clean the egr valve.

[@MarioCamagay]

Sir saan po ba nakalagay ang speed sensor Ng Mitsubishi strada4n15 engine? thanks po

[@autofixgarage5438]

Wheel Speed Sensor location sa bawat gulong, nakamount sa knuckle or Differential

[@MarioCamagay]

@@autofixgarage5438 sir maraming salamat po..