P0335 Crank Shaft for a Nissan Sentra 2006 how to replace it

[@NoBs48]

That was simply the most clear cut easy to understand, good video , explanation car video I’ve seen for this problem . I hate hearing them talk for 30 minutes to do a simple job

[@ESEVICIOUS4LIFE]

thank you I know what you mean I hate when they take so long on a video its like man can you just please get to the point

[@mattsmallwood2508]

Thanks Saved money watching this

[@ESEVICIOUS4LIFE]

you welcome im glad I can help

[@Vibekilla666]

Been stalling on replacing this part. (No pun intended) 😆 and went down there today and it was in the same spot for my 2001 1.8 took maybe 30 mins. Thanks 💯

[@ESEVICIOUS4LIFE]

im glad I can be of help I was lagging on it myself but it was shutting off so much that I said ok its time to fix it 🤣

[@bradcalhoun9234]

Thanks, you gave me the exact information I needed. Precise and concise!!

[@ESEVICIOUS4LIFE]

Im glad i can be of help

[@dannyboypedraza1404]

Thanks for the video. You saved me money. Was about to pay $210 for part and labor. Only spent $65 for the sensor. You got a video regarding the starter.

[@ESEVICIOUS4LIFE]

your welcome I had to go through the same thing so I just repaired it myself and said I should make a video and help out the people that can not afford to get it fix and teach them how to do it

[@jessieschell5813]

Super helpful! Every other person took a bunch of extra stuff off to access this part. Yours’ was the best out of the 20-30 videos I saw. Thank you!

[@ESEVICIOUS4LIFE]

thank you so much it means a lot knowing it can help you

[@markpottle1828]

My love, the music was not too loud.You could hear the guy perfectly.He explained everything extremely well and super simple much appreciated

[@ESEVICIOUS4LIFE]

Thank you so much 🙏🏽

[@alexreed5017]

Thanks for uploading the video. Every other one I've watched about this either just talks about it the whole time or they're actually just replacing the cam sensor thinking it is the crank position sensor

[@ESEVICIOUS4LIFE]

sarky 6156 i know what you mean i went threw it to thats why i said i gonna make a better video

[@miguelnicanor100]

Broooo, thank you so much, I was watching other videos and their camera angles were super bad but your video made it super simple. Thanks again

[@ESEVICIOUS4LIFE]

miguelnicanor100 im so glad i can be of help

[@mcfly96039]

Thanks! It was still hard for me until I got a long screwdriver. Your video gave me confidence to keep trying. 👍

[@ESEVICIOUS4LIFE]

im glad you did it that long flat head screw driver with the twist is a big help 😃

[@paultinniswood9085]

THANK YOU! Someone who shows you where the part is from the outside in!

[@ESEVICIOUS4LIFE]

your welcome I hate when I tried to look it up myself and no one can show you a clear video on how to fix it so I looked it up and said im gonna make a clear video that way everyone understands it

[@kerfuej]

Perfect instructions.. I've never commented. Till today

[@carlosbarrientos6524]

This helped very much . Detailed explanation , no problem . Saved myself some money on having someone doing it for me like you mentioned . Thanks for the video .

[@ESEVICIOUS4LIFE]

carlos barrientos im so glad i can help out thank you

[@waltermacias1570]

Hey compa. Estoy super agradesido con tu video. Acavo de cambiar el pinche sensor. Y todo salio chingon. Me role un blunt y me puse a escuchar la rola en el video, " hey baby". Eres carbon. Haces musica y videos de mechanica y ayudas a la Raza. Mi respeto. Gracias compa .

[@RhinoPuncher]

Finnaly a video with great quality and explanation of where that damnd sensor is ! Thanks aloot Alfred ! :)

[@ESEVICIOUS4LIFE]

olle krook thank you im so glad you like it im glad i can be of help

[@tymin2times]

Ayy bra you had the best and most helpful video I came across. I'm definitely a beginner when it comes to working on cars besides the basic stuff like changing oil or tires and small scale. So I'm basically trying to say please keep making videos.

[@dannyc7123]

If you ever work on your car again make another video man! This video came through!

[@AdventursWithNick]

I really appreciate the video man. On the first attempt I made the mistake of tightening the bolt first which put cross stress on the brace, and it snapped. I guess I'll have to tap it in with a hammer before I tighten the bolt next time. That o-ring is a real pain to get in the socket.

[@christiananaya6116]

Alfred. Thank you for your video! Your video, as well as a video from @Victor Kalchev gave me a good ideal of how to change the crank shaft sensor on my 2006 Nissan Sentra. The hardest thing for me was taking the sensor out! My neighbor helped me out with that as he was able to somehow get it out. It was a good learning experience! Thanks again!

[@jasondavenport971]

Excellent instuctions. Answers all question before i could ask.

[@75Jmann1]

After having a hell of a time getting my upstream O2 sensor out that was completely burnt, it didn't fix my 2005 Nissan Sentra 1.8 liter. But of course it did pull the code finally for the crankshaft position sensor. It's lame that they recalled them on the 2.5 liter but not my 1.8 liter when many of them fail and sometimes don't trigger a code. I broke down unexpectedly on a rural hwy. I got lucky but others may not. Nissan should have handled it correctly.

[@ESEVICIOUS4LIFE]

jason mulvey nissan has a lot of problems even with there new 2018 sentras

[@xueyang3594]

Very helpful. I hate those sped up videos that doesnt shop step by step

[@jorgemora7190]

Wow. Very good job thanks

[@ESEVICIOUS4LIFE]

Thank you 🙏🏽 im glad i can help

[@samuelgomez627]

great video , you earned my sub

[@ESEVICIOUS4LIFE]

Thank you 🙏🏽

[@robertross2219]

helpful video Im still in the process of trying to find the sensor , Im not very mechanical,. I wish i knew wether you were on the passenger side or the drivers side

[@FW190D9]

Thanks for making the video sir

[@ESEVICIOUS4LIFE]

you aren so welcome

[@lboy544]

thank you for the video it is a great one !!! can not tell you how helpful it was

[@TannerNelso]

Great video, would love to see more on this car. Mine is having stating issues, and this was one of the solutions suggested. That, and also read the fuel line tends to un prime itself everytime its off.

[@FranciscoGonzalez-yx7mk]

Ufff man, you just helped me a lot!!! Thanks for this video. Puerto Rico.

[@franciscohunter4422]

Thanks brother for teaching us your knowledge

[@ramonhermosillo557]

Thanks, this is going to help with the starting issue, right?

[@huck244]

Thank you sir!

[@ESEVICIOUS4LIFE]

your welcome

[@filmzmedia]

This is what I needed. My 05 sentra dies on drive, stalls going up the hill. Loss of power on a stop light. Run the computer reader. Pop a code crank shaft sensor A.

[@alcep892]

Complicated but you made easier to under stand ... BTW the music in the background is a magnet and one can enjoy the video better

[@ESEVICIOUS4LIFE]

Al Cep why thank you that music in the background is my song i produced and released it

[@Cityboy-rw6mi]

Thanks for the video, my car seems to have this issue.

[@ESEVICIOUS4LIFE]

Kenneth Fielder you welcome let me tell you that issue was so getting on my nerves bad

[@mayraruiz9447]

Thank you so much god bless great video

[@ESEVICIOUS4LIFE]

You are so welcome 🙏 thank you I hope it helped you

[@jeramydowns2487]

The hardest part is getting the damn thing pulled out.

[@ESEVICIOUS4LIFE]

Jeramy Downs yes it was

[@jakelake8829]

Thank you for this video. Gonna save us some money!

[@jessedagandan8947]

thanks for your video it helps me to locate it.

[@mattdajedi]

"You didn't have to pay a high ass mechanic for this" well I'd definitely would want my mechanic sober for the job hahahaha also thanks for the video gonna do this soon toy relatives car.

[@tonytalyor5090]

hey .....great job man...you were right on the money buddy''''' thank you very much bro....

[@SAINTSEIYA19811986]

Thanks for the video. It was on point.

[@ESEVICIOUS4LIFE]

you are so welcome

[@SLiveForTheMoment]

What is the OEM part number for the crankshaft?

[@ESEVICIOUS4LIFE]

That i can not remember

[@sweetsendaedreamr]

Thanks man.. $200 dollars i ain't even spending!

[@allanjaypalomique7609]

Where did you buy the oem crankshaft sensor sir???

[@chuyevang71]

In theory, would it be alright to not place the part back into the slot and only plug it into the wire?

[@GeostigmaPlays]

Is this your car? If so have you drove it quite abit since doing this work, did it fix issue? I just bought a 2006 nissan sentra and it takes a few tries to start the engine most of the time. Im thinking about replacing the crankshaft sensor, camshaft sensor, and fuel pump.

[@MrCpipes]

Doing it tomorrow!! Thanks very much!!

[@james-497]

nice thanx

[@ESEVICIOUS4LIFE]

Your welcome 🙏🏽

[@hello-do7pc]

Hey quick q. Did you need to drain the oil before switching out the crankshaft pos sensor?

[@ESEVICIOUS4LIFE]

hello123456 not to my knowledge

[@hello-do7pc]

Alfred thank you

[@motorcyclemike1299]

I got mine loosened easily but when ai pulled it out it hit a bracket or bolt. So what you do is pry up on it until it clears the bracket. Not too hard because it might break off in the hole. The New one will just pop in easily and won't need pryed. Also when you put the new one in, use your right hand to put it in. Can't do it with the left hand because of angle, just turn it clockwise and counter clockwise a few time while pushing. Easy!

[@JustinSaltonstall]

I need to change one out on my 2009 Sentra. Do you happen to know if it’s in the same general location? I can’t find a diagram or video for that specific year and like you said, engines can differ from year to year. Thank you for any help.

[@ESEVICIOUS4LIFE]

Justin Saltonstall im so sorry for the late notice i really dont know

[@tonyjrworld]

Nice I like it Have a Question it’s? 2 Crank Sensor ? I have Nissan Sentra 2005 i change bout sensors like four months ago and I’m got the same problem again any sugestión?? Thanks

[@ESEVICIOUS4LIFE]

Have you hooked up the scanner to see what sensor it is because i replace the cam shaft sensor as well its so easy to replace i did both

[@tonyjrworld]

Alfred Po335 CKP-SEN/CIRCUIT DTC STATUS I CHANGE ALREADY

[@christo_vas]

Was there a motor mount in the way of yours?

[@ESEVICIOUS4LIFE]

Christo Vas i cant remember

[@urbz200]

My car won't turn over it's a 2006 Nissan Sentra 1.8L . Should I check the starter first or crankshaft first??

[@Nebrida23]

If you happen to know, can you tell me the part number of the duralast part you used? I just want to make sure I ordered the correct one.

[@shantebaldwin6671]

Is the cam and crank sensor the same thing or two different things

[@ESEVICIOUS4LIFE]

2 different ones I know they almost sound the same

[@GarenP]

Is your car still holding up after putting in the new Duralast crank shaft sensor?

[@randygaytan1268]

You’re a fucking godsend, thank you for helping me save a shit ton of money! ]

[@jessietheaztec]

What symptoms you had in order to replace it?

[@ESEVICIOUS4LIFE]

The car was shutting off even when I would drive sometimes

[@jessietheaztec]

Mine actually jerks when I accelerate at the beginning. And it feels like it wants to shut off. Maybe that's what I need to do. Thanks brotha 🤘🏼

[@ESEVICIOUS4LIFE]

@@jessietheaztec mine had that too after I did that I didn’t get no issues after that is check engine light on

[@jessietheaztec]

Yea light is on

[@hydrokillz2045]

Very helpful! and nice music choice brotha haha.

[@fefe8607]

Awesome video Congratulations thank you 👍🏻

[@flyingvfan51]

Thank you! This helped me a lot.

[@ESEVICIOUS4LIFE]

flyingvfan51 your so welcome

[@DannysOutlook]

Dude, great video.

[@kirbycollins3223]

My Sister in Law Just Spent $800 to Have Hers Crankshaft Sensor on Her 2006 Sentra!!

[@ESEVICIOUS4LIFE]

No way wow thats a burn

[@jaimainegrant577]

Good Looking Homie ✌️👍

[@ESEVICIOUS4LIFE]

Jaimaine Grant anytime homie

[@Tman-xr7xw]

Great video.

[@Hephoestus69]

Why did u had to change it what problems was going on before u replaced it

[@ESEVICIOUS4LIFE]

larry smith it was shutting off on me

[@motorcyclemike1299]

@@ESEVICIOUS4LIFE did it fix the problem of shutting off when yoi replaced it?

[@zamanthahernandez9961]

@@ESEVICIOUS4LIFE did it still shut off on you or no ?

[@THAT2JZGTESUPRAXX]

Thanks for the help.

[@stephanarena1905]

I got a question, I have an 05 Sentra and there's an exact same part that goes on top of the engine, did I put it in the wrong pkace

[@cputt1985]

stephan arena the one you replaced is the cam shaft position sensor.

[@davec1330]

I believe the Camshaft Position Sensor & the Crankshaft Position Sensors look, and may be, identical.

[@GarenP]

They look identical and are sometimes even the same part number, depending on manufacturer - so yes, it is confusing - and likely you didn't make a mistake. The OEM is Hitachi.

[@nedwilliams1890]

got it out but coiuld not get it passed the frame and that bolt even after i tooked the bolt out i could not get it pass the frame that the bolt goes in

[@ESEVICIOUS4LIFE]

ned williams some of them get stuck its just how you can maneuver around thats tricky

[@jaguarblack4332]

There's a camshaft and crankshaft on a 2006 Nissan Sentra? Just asking cause I replaced a camshaft and my car still isn't running.

[@MistaTofMaine]

Yes, 06 Sentra has both sensors, camshaft and crankshaft. They are in fact the same part. This video covers the crankshaft sensor, which is more difficult to replace due to the location of it being under the vehicle. Issue I'm having is light for camshaft sensor code comes on, but when I replace with a new sensor my car won't start at all. So I just put my old one back in after cleaning it up, but still didn't really fix the problem.

[@jaguarblack4332]

@@MistaTofMaine thank you sir.

[@tonyjrworld]

MistaTofMaine I change both sensors like 5-4 Months fix the problem now I got same problem!! What? Do you do too fix it?

[@yourboyroy1203]

I love you

[@joebright229]

Is this the same for a 2005?

[@ESEVICIOUS4LIFE]

Its a 2006 i am not sure if it is

[@TOOMERSCOFFEESHOPandROASTERY]

Yes it is

[@MarceloFernandespaisagista]

Ótimo vídeo valeu

[@bryanwight8176]

Churr Bro. Bang on O U 1.

[@ianbarker18]

I replaced this as I was having the same error code, replaced it, now the car won’t even start. ???

[@SF_Curious]

Dude this is a nightmare! There is no space down there, the sensor is stock in there and there is no leverage to pull it out. How you do it???

[@ESEVICIOUS4LIFE]

Casa Tequila SF with the flat head screw driver stick it in in different lil spots and twist it

[@brandonmartin7260]

Ok so what happens when you need to actually drive the car vehicle changing the sensor doesn't do a damn thing it needs to be relearned to the computer so how does one do that now it doesn't crank because we removed the the sensor ???...

[@___Archangel____]

Send me the link to the song bro

[@ESEVICIOUS4LIFE]

Miguel Garcia thanks my boi that song is a single that i released myself here is the link kzbin.info/www/bejne/hojJp4h_j5mWY68 you can find it in ever digital platforms

[@mohammadsheikh1690]

Thanks

[@kennyrobinson1484]

I cannot for the life of me get the old sensor to come out. Anybody have any tips and tricks on how to maneuver it out? I’ve had wire and everything on this thing.

[@davec1330]

You may want to go with a shorter flathead screwdriver so you can get under the edge of it and start working it out by twisting the screwdriver.

[@joe37flo619]

👍🏼👍🏼

[@rainbowcreationsbydeniseco7570]

It still looks hard for me.

[@hectorumbatal5087]

Good video, terrible music

[@soychingon2842]

.

[@christopherscooper58]

Thanks man ! Very informative.

[@ESEVICIOUS4LIFE]

christopherscooper58 you welcome my friend

[@domalbe51882]

Awesome person, thank you for sharing.