P0345 Camshaft position sensor Bank 2 Infiniti fx35 Replacement!

Just a guide video for changing the camshaft position sensor bank 2 Which when bad throws code P0345
Infiniti fx35, g35,Nissan, vq35de
Next couple videos will be on some mods and also lowering springs! Stay tuned and subscribe for the vq content!

[@Get2itHTX]

Thank you, I just replaced Bank 1 last week at 190K+ miles. A week later P0335 came on.

[@nahum7405]

Hi I am not a mechanic but I replaced it in 5 minutes approx You don't have to unplug the throttle body because you gonna end up with that RPM to high Replace it from the passenger side just by touching and feeling the sensor that is hold by 1 bolt. I also bought the sensor bank 1 and bank 2 from ebay for $15 dollars and works the same as the factory original one.no difference.

[@MrMEApollo]

For anyone doing this, tighten the sensor bolt first before plugging it in. I was going crazy trying to tighten it with the sensor plugged in

[@ononturmandakh7943]

Hey mister, thank you sir. Watching your video just replaced it by your instruction. i did it my self. Now she purring like a golddigger haha. Helped a lot please be awesome as always. Kisses dawg no homo

[@MATALOMUSIC]

Just happened to me right now, thanks for this!

[@unholyrollerr8rfrankiemosq680]

Thanks! Your video helped me out! 🤘🏼😎

[@KenHMladin]

Smart man ! Didn't unplug the throttle body, LOL !

[@thornbush17]

Thanks for this info

[@cesarmata7367]

Hi, It knows if it is a sensor on each side or there are 2 sensors on each side. In my Infiniti it says (Sensor A, Bank 2) will there be sensor A and sensor B on the side of the camshaft ? Congratulations for your videos.

[@larssahlen1522]

Not suppose to clean the throttle body according to Infinity. You have to reset the idle adjustment with the scan tool if you touch the valve since it will be out of adjustment. Good video, I will remove the throttle body but keep it plugged in.

[@wedster93]

Yes you are correct since they're really sensitive,but many have done so including I. And it will throw off the idle which you can reset by doing the pedal procedure no need for scan tool. That's what I did and back to specs. Thank you for your comment and best of luck glad the video can be atleast a bit of help👍

[@larssahlen1522]

@@wedster93 I replaced the sensor and everything is working fine. Thanks again for the video, very helpful!

[@samuelcorral4701]

Great advise . Don’t recommend unplugging anything you don’t need to . Clips are the worse anyway .

[@Lee-cy7df]

Can you explain the symptoms you was getting from having a faulty sensor ?

[@wedster93]

Sure,car was jerking as soon as I accelerated mainly around 1000rpm to 1800rpm then proceeded to normal. Only happens in complete stops though.

[@onifadekhalid3477]

It's happening to me right now. Clicking but not starting

[@thornbush17]

My car died while driving. A couple of times had to crank ignition twice b4 start.

[@ceezauto213]

What kinda socket do you need for the 4 throttle body bolts?

[@wedster93]

Mines didn't use sockets I used hex keys

[@vvtheonevv4007]

@@wedster93 what size

[@BoOmBaMan]

Hey man I have a white 06 VQ g35 that starts and idles for 5 mins then stalls. Sensors changed, new TB, cleaned maf, no additional codes. Engine is good at idle but just bogs out slowly. Any thoughts. Thanks

[@wedster93]

did you do the throttle body calibration after putting in the new?

[@BoOmBaMan]

@@wedster93 yes throttle relearn. New spark plugs. When I hard reset to unplug/ reconnect the battery the car starts and idles again with the same bog out. Idle is strong within a few mins engine dies. This is as far as I got from a no start

[@wedster93]

@@BoOmBaMan Try checking your O2 sensors , and spark plugs as well as coilpack

[@BoOmBaMan]

@@wedster93 the idle is still good with no misfire. Spark plugs are new NGK iridium.

[@figueroa4410]

@thizzface have you tried replacing your crankshaft sensor?

[@john90304]

My 05 FX35 while stopped suddenly shut off. I have no check engine light on. Has that ever happened to you?

[@wedster93]

Same reason,it just shut off while I was stopped at a red light,I turned it off and tried starting it again,it hesitated but turned on after getting home it threw me P0345. There's 2 sensors bank 1 crankshaft position sensor Bank 2 camshaft position sensor

[@wedster93]

It will also be early signs of sensors going out. Recomend Oem sensors only it'll be the best option and replace in pairs

[@john90304]

Thanks bro i will Definitely be replacing it with a new one.

[@c00lguy12345]

@@wedster93 Can you please elaborate why use OEM sensors only? My G35 is throwing P0345 code as well and I was thinking about getting a sensor from advanced auto.

[@Lee-cy7df]

Hey I changed bank one of cam shaft sensor and car ran perfect then I changed the power steering pump and now car is extremely sluggish in first until it reaches second car runs fine (2005 fx35 ) can you help ?

[@wedster93]

Is there any check engine light? Try checking again to see if you left anything loose. Also fluid should be double check as well.

[@Lee-cy7df]

Yes check engine light is on , Fluids are good , I’m thinkn note be a coil ? Are sensor

[@wedster93]

@@Lee-cy7df try getting that check engine light scanned to get the code. It could be misfire in cylinder 1. But best option would be to scan the check engine

[@Lee-cy7df]

Ok ,will do . thank you appreciate your help !!! And respect the quick response back !!

[@wedster93]

@@Lee-cy7df no problem thank you for watching👍

[@zeezohassan]

If you don’t clear the code will you still have the symptoms?

[@VVS_Astral704]

No. The symptoms wont be there anymore but the computer hasnt reset istelf meaning that light will stay on. If its still going to present an issue for the ECU it will put the vehicle in limp mode

[@sunnychang]

replace it from the bottom and you don't have to reset the throttle body

[@wedster93]

easier from the engine bay,also i had to relearn my throttle body since i cleaned it.

[@samuelcorral4701]

I found the green plug , but there is no sensor ?? Why

[@samuelcorral4701]

Had to come back on here as a beginner , this video is great . Sensor 2 is on the driver side , I found another green plug , that wasn’t it . Sensor 2 is right next to that. Hardest part was the Damb Clip !!!!!!! Other then that all great and all lights are now gone . Thanks !!!

[@RH-qj5xk]

Unless you are midgets, you can do this from left side without removing single hose or anything.

[@ryanbailey2263]

And I stripped one of the bolts on the throttle body...... Noooooooo

[@mazemaz4169]

Where the bank 1