P0455 EVAP CANISTER VENT VALVE 2005 TRAILBLAZER

[@flyboy2610]

That white plastic clip that holds the vent tube onto the valve is not designed to be removed in the way that is shown in the video. If you try to remove it that way you run a good risk of breaking the clip. The way to remove it is to push in on the back of the clip. When you do that the clip "legs" will push farther apart. Holding the back of the clip pushed in, pull the tube off the valve.

[@vincentvicari2951]

Thank you for posting this, you seem like a very nice and kind person

[@dmnchannel4874]

Thank you

[@عبدالوهاب-غ4ب]

@@dmnchannel4874 أين يقع الكانستر انفوي2003

[@alpinehs]

Great video. Very helpful. Thank you

[@eliassanchez4842]

Thanks a lot men this video rally helpd me!!!!!!👍🏻👍🏻👍🏻👍🏻👍🏻

[@FireEater]

Thanks for sharing much appreciated 👍🏻

[@concas19]

Thanks for doing these videos. They help a ton!

[@guycapone6496]

Thank you for the help, easy to do!!!

[@h.mandelene3279]

Is that part "nomally open" I found the new one "open" blowing air through both before installing- just like the original one.

[@lindarumfelt2922]

Thank you so much for sharing!

[@rask8532]

Was this making ur trailblazer stall???? I replaced my flue pump n still stall out???

[@daveboland166]

Do you know the part number for the hose? My son melted his and we can't find a replacement. Thank you

[@dmnchannel4874]

I don't, sorry about that.

[@w8what575]

Wish these things weren’t such a pain to work on all the time...and wish they would have put in an access door to the fuel pump and all it’s components ...having to drop the tank in order to change the fuel Pump, filter and regulator is a big pain

[@tylersanders8853]

So I have this code, I changed this evap part, and also the purge solenoid which I heard is supposed to cause small leaks sometimes. Anyways I still have the p0455. Any ideas? All my hoses look fine. I want to check everything before paying for a smoke leak test.? Any help is appreciated.

[@dmnchannel4874]

A bad intake manifold fasket can cause a small leak as well as a bad seal on the fuel pump. You might need to get the smoke test done to be sure.

[@tylersanders8853]

@@dmnchannel4874 I figured, I appreciate it boss

[@msw1296]

Gas cap maybe.

[@robertwiebler7470]

Unhook the battery for five minutes.

[@marciananton9226]

What to do after this canister has been replaced but I am still getting this code saying change the canister plus my truck is still eating gas up fast?

[@dmnchannel4874]

Have you checked the vacuum lines for the evap system for leaks?

[@roltyd22]

If its immediately on after clearethe codes check your wiring by gently pulling on both by cutting the sheath to get to them, my 03 Tahoe throwing po449 just for that now

[@chrisd9366]

Did the replacement of the part fix the problem??

[@dmnchannel4874]

In my case it did, But there are are things that can cause the same code. From what I understand one of the issues that can cause it is the seal on the fuel pump on the top of the fuel tank. A smoke test can tell you exactly where the leak is.

[@juancastillo1645]

Did the code come back after installing the new one?

[@dmnchannel4874]

No. I turned it off with my scanner

[@mikeb.2169]

... I appreciate the video you made. My TB is showing the same code (p0455). After you replaced the part and drove it around, did this fix the problem?

[@jamesbarlowjr.3762]

Still waiting....

[@Dhardy316]

@@jamesbarlowjr.3762 11 months later...(he must not drive much)

[@jamesbarlowjr.3762]

@@Dhardy316 Haha! 😂

[@tystinson5894]

I just did it and my shyt still saying the same shyt... same code..

[@USSHammerology]

@@tystinson5894 I replaced my gas cap and the code went away.

[@bertoj6189]

Anyone know if this is the same for an 04, I had mine pull the same code but it will go off and on. But the last 3 days the code has been sticking.

[@amandawright3383]

02-09 I believe are all the same

[@bertoj6189]

Amanda Wright thank you, my code keeps coming and going. I am going to try a factory gas cap first. The aftermarket ones seem not to work sometimes. After that move to canister repair and check all lines.

[@bertoj6189]

They are all the same, got underneath and was just like this one.

[@alexdiaz6234]

Did that fix the problem?

[@bertoj6189]

Alex Diaz honestly it did not, I have tried changing it to the original gas cap, and the evap purge valve. Neither did the trick. Since were in quarantine, I dont use the truck much at the moment, I use my other car so it’s not to concerning. The leak is not bad tho, still has a full tank and I have not see it drop. I turn it on from time to time and let it run for 10-15 mins. I’m going to have my buddy do a smoke test on it when his shop opens back up. That way I do t go part crazy lol.

[@covenantenterpriseinc.5898]

Purge valve canister

[@realtruth97]

You're supposed to change the whole emissions system for your truck to work better