P10/27. Balance shafts. How to Assemble Toyota Camry 2.4 VVT-i engine: Balance shafts. Years 2002 to

Next video: • P11/27. Oil Pump. How ...
First video: • P1/27. CLEAN the ENGIN...
Ejes de equilibrio. P10. Cómo ensamblar el motor Toyota Camry 2.4 VVT-i: Ejes de equilibrio.
Balance shafts. P10. How to Assemble Toyota Camry 2.4 VVT-i engine: Balance shafts. Years 2002 to 2022.
Disclaimer:
These videos are intended to offer general information working a car and tools.
The Peter Finn have used best effort in creating the video. No liability can be accepted by the author and publisher for any expense, damage or injury caused by any errors in the information given. In no event shall author be liable for any direct, indirect damages or loss of profit by you or any third party.
Due to factors beyond the control, I cannot guarantee against improper use or unauthorized modifications of this information. Peter Finn assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Peter Finn.
Work carefully and safely. Also avoid accidents.

[@geoffspitfire5160]

Greetings from New Zealand. Thank you so much for posting these vidios Peter. I am about to tackle my sons 2AZ 2.4 engine and your series on the 2.4 are really great for reference. Love your Russian accent as well!

[@PeterFinnTheCarDoctor]

Glad to help

[@olusegunadebayo2678]

U are the best sir, how can I get one of these tools

[@dervinjohnson8531]

Peter you are the best up top 👍👍👍

[@PeterFinnTheCarDoctor]

Thanks Sir 😀

[@jph8484]

Very informative video thank you i have to replace the balance shafts in my 2011 Scion xb and after watching your video it will be easy to do

[@PeterFinnTheCarDoctor]

Glad it helped

[@ditr257]

Excellent work Peter!

[@PeterFinnTheCarDoctor]

Thank you! Cheers!👍👍👍👍👍

[@philkedrick2638]

@@PeterFinnTheCarDoctor thank you

[@IkhsanND]

great. I have replaced the balancer shaft on my Camry.

[@PeterFinnTheCarDoctor]

Nice 👍

[@alialqaisy6197]

Thank you 🙏 brother

[@PeterFinnTheCarDoctor]

My pleasure

[@n.s.o.automechanicconsulta1334]

I'm so interesting on the job bro

[@PeterFinnTheCarDoctor]

Me too😁

[@hectordeanda9133]

Can this job be done while the engine is still in the car? How would the balance shafts stay in place before putting the cover on?

[@PeterFinnTheCarDoctor]

Good comment 👍

[@usace69]

I really got confused, piston 1 should be in up dead Center in ignition stroke and you saying in down!!?? Please clarify

[@PeterFinnTheCarDoctor]

Piston 1 must be up.

[@javiersoto3364]

Hi Peter question I asked a mechanic to Open a 2.5 engine a Camry 2011, rings were replaced standard size, but once was installed back the engine knocks and rummble as unbalanced the compresion and spark plugs are ok, as well as timing do You think he could set something unbalanced I mean not done what You explained in this vide ?

[@PeterFinnTheCarDoctor]

Noted 👍

[@AnNguyen-qo4zt]

What is the name of that torque tool? I would like to get one.

[@aliiqbalansari129]

Very nice sir

[@aliiqbalansari129]

From Saudi Arabia

[@PeterFinnTheCarDoctor]

Keep watching

[@consentidocomunwithcommons7698]

Thanks 🙏 so much for your video “” today i have to install this balance shaft from under my car. My plastic or fyber gear ⚙️ was destroyed really bad “ Now is installed the new one “ obviously I don’t remove the engine so im going to bed really sure are alignment in the cover and piston 1 to be able torque from underneath “””. Thanks

[@PeterFinnTheCarDoctor]

Glad it helped

[@glenglene8473]

can you be able to rotate the black plastic gear on the two-gear balance shaft? I can rotate the gear by almost a tooth. Is that normal?

[@PeterFinnTheCarDoctor]

Plastic gear? What car you have?

[@glenglene8473]

@@PeterFinnTheCarDoctor Toyota 2AZFE 2.4L engine. One balance shaft has two gears. The black (plastic/fiber) gear can be rotated by half tooth. Is this normal or it need to be replaced?

[@klanr508]

Hey Sr but In the alldata said the points has to match the balance go up not down thats the correct posicion but other guys they said they have to put the balance like urs down because was having vibration but alldata dont say that Im confuse now🤔🤔 Alldata said up and you said down and other guys said up

[@PeterFinnTheCarDoctor]

My way is Ok.

[@philkedrick2638]

question, saw your segment on 2000 COROLLA MULTIVALVE 16 1.8,,,, QUESTION ON LOSS POWER AND NOW TO NO START ISSUE ,,,,PLS, HELP,,,, 110 K MILES 2ND OWNER NO CURRENT MAINTENECE DONE OTHER THAT OIL CHANGES AND TIRE ROTATIONS

[@PeterFinnTheCarDoctor]

Ok... sounds bad. Maybe stuck piston rings?

[@haroldhoupt6090]

On my 2002 2.4 L Camry. When I dropped the oil pan I found 2 balance shaft bearings laying in the bottom of the pan. How could the bearings work their way out to fall into the pan?

[@PeterFinnTheCarDoctor]

Sounds like an installation error by a worker after the factory. So not the Toyota factory work.

[@haroldhoupt6090]

@@PeterFinnTheCarDoctor I agree. Someone has been in there.

[@markvermeulen1372]

@@haroldhoupt6090 Did the motor explode?

[@haroldhoupt6090]

@@markvermeulen1372 Running like a sewing machine. Thank You!!

[@IbrahimBalogun-uu6mz]

Conferm

[@PeterFinnTheCarDoctor]

Thanks 👍