P14/27. Timing Chain. How to Assemble Toyota Camry 2.4 VVT-i engine: Timing Chain

Next video: • P15/27. Crankshaft Gas...
First video: • P1/27. CLEAN the ENGIN...
Cadena de distribución P14. Cómo ensamblar el motor Toyota Camry 2.4 VVT-i: Cadena de distribución
Timing Chain P14. How to Assemble Toyota Camry 2.4 VVT-i engine: Timing Chain
Engine type: 2AZ-FE 2.4 and Toyota Camry 2004
Disclaimer:
These videos are intended to offer general information working a car and tools.
The Peter Finn have used best effort in creating the video. No liability can be accepted by the author and publisher for any expense, damage or injury caused by any errors in the information given. In no event shall author be liable for any direct, indirect damages or loss of profit by you or any third party.
Due to factors beyond the control, I cannot guarantee against improper use or unauthorized modifications of this information. Peter Finn assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Peter Finn.
Work carefully and safely. Also avoid accidents.

[@ditr257]

Excellent, and very accurate job Peter! Please rotate the crankshaft or flywheel to make sure that everything is good!

[@PeterFinnTheCarDoctor]

Thanks, will do!

[@jourdainminawa6005]

😂

[@coulibalysouleymane9656]

Merci infiniment pour votre soutien merci beaucoup

[@PeterFinnTheCarDoctor]

You're welcome 👍

[@vongsakra253919]

I remember I have part of you when coming to car. I watched your videos since day one.

[@PeterFinnTheCarDoctor]

Great ! 😀

[@fernandohood5542]

The bottom dot on the crank should between the orange tag or aligned to the bottom of the tag?

[@sosscarz]

yes it should.

[@PeterFinnTheCarDoctor]

Thanks for comment, 😀👍

[@usace69]

Thank you for helpful information

[@PeterFinnTheCarDoctor]

My pleasure

[@consentidocomunwithcommons7698]

You are the best Teacher you are awesomely definitely suscribe ++++////those Toyota engine are made in perfection reliable for Few decades without any maintenance are very good engine. I’m a BMW tech and Toyota Too for more than 20 years driving both brand and working with them are the best engine “”” Now im with Tesla Technology I owned a Tesla S and now in the learning processes month by month are really simple really like plug and play all the rest is just software input “””” Awesome video “”””” great video “” I have plenty Trust in follow your instructions are great “

[@PeterFinnTheCarDoctor]

Thank you! Cheers!😀

[@benardgesura9284]

Nice work done 🎉

[@PeterFinnTheCarDoctor]

Stay connected 👍

[@alamshah1159]

Good info bro.. even I'm not mecanic.. Im use toyota wish 2.0... 260k km. Until now I never change the t chain.. how many km need to change... Tq bro

[@PeterFinnTheCarDoctor]

About 400 k km

[@doubledgolfcarts4810]

thank you!

[@PeterFinnTheCarDoctor]

You're welcome!

[@harrybean2129]

Great job 👍

[@PeterFinnTheCarDoctor]

Thank you! Cheers! 👍

[@josefranciscoesquertalaman3827]

Peter Finn, excelente video *Like !!!* saludos desde Sonora México 👍

[@PeterFinnTheCarDoctor]

👍

[@mohammednaushad4356]

It was a great help

[@PeterFinnTheCarDoctor]

Great 👍

[@guabacot1691]

Hai from Indonesia

[@PeterFinnTheCarDoctor]

Thanks 👍😃

[@อู่จ่าการช่างสุรินทร์]

Thank you

[@PeterFinnTheCarDoctor]

Welcome!

[@javierantoniomorro9956]

👍👍👍

[@PeterFinnTheCarDoctor]

Thank you! Cheers! 😀

[@JohnAsiedu-x3f]

Good job

[@PeterFinnTheCarDoctor]

Thanks

[@zane8004]

Should the Guide tensioner wiggle when install to 20 NM tighten?

[@PeterFinnTheCarDoctor]

Thanks for comment 👍

[@autocare3116]

Is good 👍👍👍

[@PeterFinnTheCarDoctor]

Thank You Sir 👍😀

[@ibrahimswarray3987]

@@PeterFinnTheCarDoctor fine for us in sierra leone thank you doctor

[@YourName-vh1nu]

On 4:52 you only had issues because you installed the guide to soon you should've waited

[@PeterFinnTheCarDoctor]

Noted

[@YourName-vh1nu]

@@PeterFinnTheCarDoctor I watch alot of your videos and I respect you highly, have a great day

[@papybiancokiangalakibangu5572]

Langue française interprétée

[@PeterFinnTheCarDoctor]

Thanks for comment 👍😀

[@Z-Ack]

But did you lock or unlock the vvti gear? When installing new gear it says to unlock and tighten but also says to lock then tighten but says to make sure it is full retarded or advanced. I dunno how to interpret the shop manual there..

[@PeterFinnTheCarDoctor]

Thanks for comment 👍

[@saiduabdullahi3871]

Saidu

[@PeterFinnTheCarDoctor]

Noted and good info !

[@Wedoitalltohelp]

Terrible

[@PeterFinnTheCarDoctor]

Noted 👍

[@Z-Ack]

Ha. His name is we do it all to help.. but he’s an angry old asshole.. “terrible”. Sir you can say that about your wives cooking and her weight gains but lay off the guy actually doing stuff to help others.. .. and go sit on a thorn bush prick..

[@Peter-pv8xx]

Is this an interference engine?

[@PeterFinnTheCarDoctor]

Yes

[@JohnAsiedu-x3f]

Thanks for your good work

[@PeterFinnTheCarDoctor]

It's my pleasure

[@mohammadtaqi1396]

Good job man all need it to put the chain on is to first put the chain on exhaust spracket then the intake and it will be perfectly in its place.

[@PeterFinnTheCarDoctor]

👍

[@nerdbiscuit]

Thank you very much for sharing. Much appreciated

[@PeterFinnTheCarDoctor]

You are very welcome

[@Dmnlndr]

Thank you my friend it really helped me alot

[@PeterFinnTheCarDoctor]

You're welcome!

[@JuanDiaz-vm1pv]

Great job. Thank you so much!

[@PeterFinnTheCarDoctor]

👍

[@elias8073]

Woooh I always like you you are my sunshine thanks to you

[@PeterFinnTheCarDoctor]

Wow, thank you

[@mike75479]

How to turn the crankshaft I’m installing the chain right now, I don’t remember if you mentioned but in this video is not showing

[@PeterFinnTheCarDoctor]

Clock wice

[@LondonG0708]

I'm doing my timing on my Peugeot 107 1kr Fe my question is the crank is the same every turn when no chain is attached so the cams aren't turning as long as piston is top dead centre I can set cam ?

[@PeterFinnTheCarDoctor]

Thanks for comment 👍

[@mosesbenedict8218]

After coupling there's sometimes a vibrating noise down the engine, can you do a quick video about that thanks.

[@PeterFinnTheCarDoctor]

Good call!

[@fluke1172]

Has anyone ever tried m12x1.75, grade 12 bolts on a 2003 Toyota camry ?

[@PeterFinnTheCarDoctor]

Good comment 👍

[@GiftKayuni]

My car overheated while driving and went off and it has lost timings

[@PeterFinnTheCarDoctor]

Thanks for comment 👍

[@ecurbyhprum1043]

Excellent tutorial

[@PeterFinnTheCarDoctor]

Thank you! Cheers!

[@saulc5280]

Fantastic job on explaining the step by step process. I appreciate the information. Thank you!

[@PeterFinnTheCarDoctor]

You're very welcome!

[@Peter-pv8xx]

They're called woodruff keys that are in the crankshaft.

[@PeterFinnTheCarDoctor]

Thanks 👍

[@ekohdsusilo4143]

👍👍👍👍👍

[@PeterFinnTheCarDoctor]

Thanks for comment. 😀👍

[@Freelenz-Autos]

I love ❤️ ur job.and the way u explain things u are welcome doctor

[@PeterFinnTheCarDoctor]

Thanks a ton

[@Hudoba4]

Lets hope you’re not a flag tech

[@PeterFinnTheCarDoctor]

👍

[@pov2617]

Hi

[@PeterFinnTheCarDoctor]

Noted 👍

[@forthepeople8218]

Where did u set tdc? I’m confused

[@PeterFinnTheCarDoctor]

Look markings

[@michaelopere5424]

ForThepeople Tdc is easy to set. All you need is to set the linear marking on the crankshaft position upwards.

[@seanedwards94]

@@michaelopere5424 @7:16 I'm confused on how he turned the flywheel. If the engine is still installed how would you turn the crankshaft to get the markings facing up

[@billclinton6040]

@@seanedwards94 Just install the crankshaft bolt and use it to turn the crank.

[@mosesandrews4381]

hi Peter, I'm having the hard time doing the timing on my scion tc, because the car is a coup I have to take the whole engine out every time. my cam gear seem to be coming out of time or slipping while under the chain before the chain finally gets to be tight enough to turn the gear with out more slipping. please help.

[@danielmartinez1911]

Did u resolved your problem? Do I have to remove the oil pan. Im doing the timing chain on a Scion TC as well. Thx

[@mosesandrews4381]

@@danielmartinez1911 you have to remove oil pan yes, I never got it fix

[@danielmartinez1911]

@@mosesandrews4381 so I took off the pan, and all bad .. big chunks of metal in there, and the bottom of the block by the oil pan has a cracked piece on it. Think this engines done

[@PeterFinnTheCarDoctor]

Thanks for comment 👍😀

[@yongxiong8568]

You dont no notthing too slow

[@PeterFinnTheCarDoctor]

👍

[@michaelopere5424]

Yong Xiong Your insults will take you nowhere .Dr Peter Finn the car Doctor has enabled me to learn alot of things about Toyota engines that i hardly knew about.His enlightening,inspiring,and educative videos have also given me the courage to rebuild my water ceased Toyota 2AZ FE engine.

[@luismelendez1761]

Excellent video Thanks and God Bless you.

[@PeterFinnTheCarDoctor]

Thanks, you too!