P1354 on 2002 Sienna

Flashing check engine light comes on while driving a 2002 Toyota Sienna.
P1354 - V V T System Malfunction Bank 2
P0300- Multiple cylinder misfire
P0302 - Cylinder 2 misfire Dected
P0304 - Cylinder 4 misfire Dected
P0306 - Cylinder 6 misfire Dected

[@markballard1515]

Thanks. This video saved me a lot of time. With the help of this video I was able to do the repair in less than 30 minutes. Without it, it probably would have taken me that long or longer to even find it.

[@bobbyg2515]

Your video helped me find out whats wrong with my 2001 Toyota sienna. 223000 miles and I agree its the Oil control valve or VVT

[@davidcassia1595]

Thanks man my car was running really bad I thought it was doomed took the solenoid out and replaced it fixed all my problems instantly

[@daviderickson7675]

This was helpful. I had a P1349 code (along with P0300, 301, 303 and 305) on my 2001 Sienna with 248000 miles. Engine was misfiring when hot. This fixed it.

[@ryanporter1819]

Thanks for the video! I thought it was going to be hard, when it ended up being much easier than even changing the oil. Now my Sienna runs so much better. I do think it might be good to change the other oil control valve, but I think that one is quite a bit harder to get to.

[@WyomingGizmo]

Those are the exact codes I got read yesterday. I am going to replace the OCV and hope this corrects the problem. Thank You. Video was well done.

[@muskmelon]

Thanks just got exactly the same problem when reach 275000 for my 2001 sienna

[@vaamtxaj]

thank you for your vedio very helpful

[@modelo1115]

Thanks ... it fix my problem

[@mcdangdang]

there are 2 of these valves on a v-6 engine, one for each bank of cylinders, he only took out one and it appeared to work, it could be the other valve that is not working.

[@mstrwankel13b]

Good job

[@Dancing_Alone_wRentals]

Thank you, Well done. Same code here. I have an exhaust leak too...so that gets done first.

[@nha2448]

Thank you

[@garymiller2056]

You didn't say if you cleaned the filter.

[@festusnosaomorodion2775]

Your video is ok and quite explanatory. How do i clear the po300, po302, po304and po306

[@masterk5066]

I changed the vvt solenoids & the code has popped up again smh i got 2 codes for bank 1 popping up

[@AI-qi8rh]

Thank you !!!

[@JayavarmanSeven]

Great.

[@sirsweetness8332]

Test it hot and also ohms test 6.9-7.9 ohms is good

[@sirsweetness8332]

I have a 2002 sienna with 212K miles