Paano mag TOP OVERHAUL ng YAMAHA MIO i125 | Top Overhaul Tutorial Yamaha Mio i125 | Engine Refresh

Mga dahilan para sa Top Overhaul:
- Nagbabawas ng Langis
- Mausok (Kulay Puti)
- Natuyuan ng Langis
- Kumapit na at sobrang sunog na ang langis sa loob ng cylinder head
- Sobrang ingay sa loob ng makina
- Loss Compression
- Engine Refresh (40-60k Odometer Reading)
Timestamp:
Removal of Other Parts (Fairings/Ubox/Cover/Muffler/ Etc..): @01:49
Removal of Camshaft Sprocket: @04:13
Removal of Cylinder Head and Cylinder Block: @05:27
Piston Removal: @07:05
Cylinder Head Disassembly: @08:33
Leak Test (Intake and Exhaust): @11:25
Engine Parts Cleaning: @14:37
Piston Ring Setup: @16:52
Cylinder Block Setup and Installation: @23:02
Valve Lapping Setup and Info: @26:00
Leak Test and Cylinder Head Parts Installation: @30:55
Cylinder Head Assembly Installation: @36:58
Camshaft Sprocket Timing Setup: @38:38
Valve Clearance Settings: @39:49
Reassemble Other Parts: @40:27
Test the Scooter: @42:20
Items/Tools/Materials To Be Used:
- Flyman Socket Wrench Set ► invl.io/clkn054
- Y WRENCH FLYMAN USA BIG ► invl.io/clkt165
- INGCO 1/4 Socket Set Wrench ► invl.io/clk1ggw
- Spanner Wrench Set 8-24mm ► invl.io/clk7or2
- XTITAN Impact Wrench ► invl.io/clk7ot2
- XTITAN Power Cordless Drill ► invl.io/clk7owz
- Flyman AutoClick Torque Wrench 1/2 Drive ► invl.io/clk4lt1
- Ingco Screwdriver Set ► invl.io/clk7ou7
- Stanley Heavy Duty Long Nose ► invl.io/clk7oui
- Aeropak Throttle Body and Carb Cleaner ► invl.io/clkndlu
- Flyman Universal Valve Breaker and Installer Set ► invl.io/clksxxi
-
- GRINDING COMPOUND MGC-212 2 OZ./MGC-412 4 OZ. (Fine and Coarse) ► invl.io/clksxxo
- Allen Key Hex Set ► invl.io/clksxw1
- Rags, Old Toothbrush, Gas, Basin, Oxygen Hose (Tube)
Parts Needed for TOP OVERHAUL (Others optional depends on damage parts)
- CYLINDER BASE / HEAD GASKET Mio i125 / Mio Soul i125 ► invl.io/clksxwm
- VALVE SEAL (Mio i125/Nmax/Aerox/Mxi 125) ► invl.io/clksxx4
- INTAKE AND EXHAUST VALVE MIO i125 ► invl.io/clksxyq
- CAMSHAFT Mio i125 ► invl.io/clksxzo
- ROCKER ARM Mio i125 ► invl.io/clksy0a
- CAM SPROCKET Mioi125 ► invl.io/clksy0i
- PISTON and PISTON RING SET ► invl.io/clksy0w
- CYLINDER BLOCK MIO I 125 ► invl.io/clksy1s
- Cylinder Block Set Mio i125 (Block/Base and Head Gasket/ Piston Pin and Lock/ Piston / Piston Ring Set) - invl.io/clktgso
SUBSCRIBE HERE ► / mrbundre
FOLLOW FACEBOOK PAGE HERE ► profile.php?...
------------------
Scooter DiY Playlist ► • Motorcycle / Scooter D...
YAMAHA Mio i125 TORQUE DRIVE and CLUTCH LINING Maintenance ► • YAMAHA Mio i125 TORQUE...
YAMAHA MIO i125 THROTTLE BODY and FUEL INJECTOR CLEANING ► • YAMAHA MIO i125 THROTT...
Yamaha Mio i 125 CVT CLEANING ► • Yamaha Mio i 125 CVT C...
How To Adjust Yamaha Mio i125 VALVE CLEARANCE ► • How To Adjust Yamaha M...
Yamaha Mio i125 MAGNETO and STATOR CLEANING ► • Yamaha Mio i125 MAGNET...
Change Yamaha Engine/Gear Oil ► • Paano Mag Change Engin...
How To Replace Yamaha Mio Spark Plug ► • Paano magpalit ng SPAR...
Yamaha Mio i125 Engine Oil Strainer ► • How To Clean Yamaha Mi...
How To Fix Bent Motorcycle Brake Lever ► • How To Fix or Repair B...
Yamaha Mio i125 How To Fix LOOSE HEAD COWLING ► • Yamaha Mio i125 How To...
YAMAHA MIO i125 Rear Brake Cleaning ► • YAMAHA MIO i125 Rear B...
How To Replace YAMAHA Mio 125 Flyball ► • Paano magpalit ng Flyb...
Stop Squeak FRONT WHEEL Scooter ► • How to Fix or Stop Squ...
YAMAHA MIO i125 Change Engine Oil / Gear Oil / Oil Strainer Cleaning After 6 Months ► • YAMAHA MIO i125 Change...
Easy Replacement YAMAHA Mio i125 Seat Pad ► • Easy Replacement YAMAH...
How To Replace Headlight Bulb MIO i125► • How To Replace Headlig...
No Ytool CVT Pulley Removal ► • Paano tanggalin ang Pu...
YAMAHA MIO i125 Clutch Lining Maintenance ► • YAMAHA MIO i125 Clutch...
#topoverhaul
#enginerefresh
#YamahaEngine

[@enerochristianocanales160]

May konti lang na kulang pero sa mga beginners baka di nila alam Yung sa valve after Noh tapat nilinis Ng maayos kasi di mo sinabi baka Yung Iba di nila alam .... Pero Ganda Ng video mo

[@rodolfonerizon8619]

❤wow may natutunan nanaman ako sir

[@MrBundre]

Maraming salamat sir

[@robericklagsac1471]

2018 model pa ang mio i 125 ko ang never ko pa pinagalaw ang makina ko or nagpa body and throtel cleaning at inj3ction cleaning....ang sekreto ko alaga lng sa langis...oo magastos ss langis every 10days or 15 days lng change oil na agad mostly 800 or 900 km lng to 1000km...believe it or not ang langis ko diesel engine oil ng total...libre lng kc ss company namin un...nasa langis tlga ang buhay ng makina....alagaan mo lng sa langis wla kang problema....ask nio ang takbo nia super smooth pa rin 110 to 112 ang top speed nia....😊

[@axelseyer127]

Ang galing idol

[@MrBundre]

maraming salamat sir

[@ivandersapungan5294]

Ayos ganda ng video idol step by step idol ano naging valve clearance mo sa in/exhaust kasi dba malagitik sya nung una

[@MrBundre]

salamat sir, yung sakin ginawa ko na lang na .06/.20 pwede mong icheck tong video na ito regarding sa valve clearances baka makatulong kzbin.info/www/bejne/rajGimN5mqlqo68

[@benapiza6736]

Very informative 👍

[@MrBundre]

thanks

[@roviymarquez5850]

idol ​@@MrBundrepwede ko bang ipa top overhaul Yung m3 ko sau Lagi nalang kasi ako namamatayan ee salamat sa sagot idol

[@clementeoliva5655]

sir location nyo po?

[@MacJerv]

Boss ano tawag dun sa pantanggal sa spring? Ung special tool?

[@MrBundre]

valve breaker. check mo paps yung link sa description ng video. kung saan ito pwedeng mabili. mura lang naman yan. check mo din yung mga gamit na kailangan sa description din

[@nhadpagez]

Dapat yung oxygen sensor nilinis mo din para mabawasan gas consumption mo, habang madumi kase sensor ireread ni ECU yan, pag naread ni ECU, magrereact ngayon si gas pump, mararamdaman na parang kulang sa gas dahil sa dumi, ngayon dadagdagan ni gas pump ngayon yung amount ng gasoline sana makatulong #justsaying

[@MrBundre]

yes po, nilinis ko yung o2 sensor nyan, hindi ko lang nasama sa video

[@golski1273]

Yung timing chain wala bang timing mark yan katulad sa mga sasakyan?

[@MrBundre]

sa m3 wala sir. yung importante dyan yung timing sa cylinder head yung nakaumbok o linya tapos dapat nakatapat sa sprocket (timing gear) at yung magneto side dapat naka timing din

[@florgerallos3219]

Boss ano tawag doon sa pinahid mo sa valve ung pinanglinis mo na parang grasa

[@MrBundre]

rubbing compound po para mahasa yung valve head

[@marvindelosreyes1259]

Paps pwde ba hindi na valve lapping ,kung bago naman ilalagay na valve?

[@MrBundre]

kailangan sir, ivalve lapping kahit bago at original yung nilagay. gewang kasi kapag hindi nagvalve lapping kapag iikot mo sa valve seat at sisingaw pa din

[@wilsoncabugon6470]

Sir yung expander ba sa rings tutok lang yon hindi mo pinag patong?

[@MrBundre]

tutok lang sir

[@mikeasis3565]

Yung leak test ba boss ginagawa Wala Ng spring?

[@MrBundre]

dapat sir may spring. at dapat kahit moist hindi tatagos

[@HernandezIancalvin]

Magkano po kaya ang kailangan ibudget kapag nag pa top everhaul 😢 same issue po kasi sa mio soul i ko mausok at may langis po sa tambutso

[@MrBundre]

labor sir around 1-1.5k . kung palit block set kasama piston ring, piston, base at head gasket, piston pin around 2700 yun. palit ka na din ng valve seal. check mo sir yung link sa description ng video. nandun yung listahan ng kailangan kapag magtop overhaul ng mio. pwede modin icheck yung pricing sa mga parts

[@Bandamtv93]

Location nyo boss need kona din mag pa overhual. Nag banawas ng langis ang mio i 125s ko. Mag kano magagastos ko salamat sana masagot.

[@MrBundre]

sensia na sir, wala po akong shop, ginawa ko lang itong video na ito kasi kahit paano makatipid sa labor yung makakapanood at loss compression na din yung sakin kaya naisipan kong gawan ng video para sa mga baguhan at gustong matuto. check mo sir yung link sa description ng video nakalagay yung mga posibleng gamitin na pyesa kapag magtopoverhaul ng m3.

[@Bandamtv93]

Ganda nga ng pag ka gawa mo ng content kuhang kuha. Madali lang mag baklas kaso ang pag balik medyo nakakalito na haha

[@MrBundre]

kaya yan sir, may mga ginawa akong ibang video kung pano baklasin, tig seseparate na video sa pagbabaklas ng, throttle body, pipe, magneto side. basta ang teknik sir, huwag magmamadali sa pagbabaklas at pagkakabit, mas ok maging mabagal na sigurado kesa mabilis na sablay.

[@namelesschild1113]

Boss palitan mo bendix drive nyan.. helicopter na😆

[@MrBundre]

nacheck ko yung bendix drive nyan sir. all goods pa. nagtune up lang ako ng valve clearance all goods na yung tunog

[@jayveetubal5313]

magkano labor mo sa ganyan paps? top overhaul.

[@MrBundre]

sensia na sir. ginawa ko lang itong video para may guide yung makakapanood at makatipid din sa labor. sa ibang shop. around 1-1.5k sa labor. depende din sa shop at sa mga papalitan at gagawin.

[@jayveetubal5313]

@@MrBundre salamat paps,

[@PinasAtinto]

Ganyn dn po skn paps, namamatay cya at malambot ang kick, minsan sabay pa na ayaw mgstart sa push at kick, bago nmn po ang battery, panghanap buhay ko po motor ko kaya masakit sa ulo pggnyn my sira

[@MrBundre]

baka madami ng carbon yung valve seat at valve head. loss compression po. kung mataas na odo. pasecond opinion nyo po. posibleng engine refresh na po. palit valve seal, hasa valve, linis ngvalve seat, at posibleng palit piston at piston ring. kpag may issue sa block posibleng palit block din.

[@PinasAtinto]

@@MrBundre nsa 50k n po ang odo, 2018 model po,

[@PinasAtinto]

Sir tanung lng po, mgkano po b labor ng topoverhaul??

[@MrBundre]

@@PinasAtinto sa pagkakaalam ko sir around 1-2k labor lang pero depende pa din sa shop at mga gagamitin

[@Bandamtv93]

Wala kasi akong tiwala sa ibang mikaniko haha

[@MrBundre]

may matino naman kaso mas madami ang peraniko. hahaha

[@partida_sportiva]

Ang ingay po ng makina

[@MrBundre]

hindi ko na lang nasama sa video sir. nag valve clearance ako ulit dyan. yung settings ko hindi default.

[@jamesdemesa2342]

Nasa mag kano aabutin boss kapag nag top overhaul?

[@jamesdemesa2342]

Kci po may konting usok na lumalabas sa tambutso kapag biglang binirit yung motor and parang sobra sa init at medj malakas ding kumain ng gas

[@MrBundre]

depende sa shop at sa papalitan. usually around 3-5k. automatic, palit valve seal, hasa valve, head at base gasket, mas ok kung sabay na din ang piston ring set, kung ok ang block mas ok para bawas gastos. pwede nyo pong icheck yung link sa description ng video yung mga posibleng palitan. kapag nagpa top overhaul for reference lang baka makatulong