Pac Audio's SWI CP2 Pre programed steering wheel interface

[@vibescold906]

Finally someone that actually explains step by step geez u would think pac would do it but they don't

[@tictactoe2001]

Great Video explains better than any other video how to complete the process

[@kermit3376]

Real easy to install...if your vehicle is supported. Otherwise it was an absolute nightmare trying to figure out the correct wiring, then switch settings (one PAC app version showed JVC down, one app showed JVC up), my head unit refused to recognise the CP2 module no matter which SWC connection I used (which explained why the learning function repeatedly failed), and I eventually returned it to the vendor with explicit instructions for him to take it far away from me and order the appropriate Aerpro parts I requested in the first place. I strongly suggest before you buy this unit, download the app and make sure your vehicle is supported!

[@lltysonll]

Best video explanation

[@billydee3400]

where do I install the wiring.Is it the factory harness or the harness used for the aftermarket radio.I literally spent 7 hrs on a 15 min install because im confused as to where the SWI RC1 wiring go.I have a pioneer AVH501EX model PLEASE HELP!!!!

[@helderbrandao535]

Hi Dean. Great video. Have you made a video, where you've installed an android stereo (similar to an Atoto S8 Premium) in a 2007 Jeep Commander or Grand Cherokee. I installed the unit using a PAC C2R-CHY4 interface, but couldn't maintain the factory steering wheel controls, so I purchased the PAC SWI-RC-1 to use in conjunction with the C2R-CHY4, but couldn't get the steering wheel controls to work, despite following the instructions on the ControlPRO/PAC site. I may have purchased the incorrect PAC interface. Probably should have purchased the PAC RP4-CH11 All-in-one Radio Replacement and Steering Wheel Control Interface.

[@jorgebermudez8325]

great video, very helpful

[@FiveStarCarStereoInc]

Jorge Bermudez thank you

[@mitchrothschild9697]

Too fast. You said separate wires to back of radio and into car. Do you mean the red black and yellow should go onto new radio harness? The others I know go to the matching plug in car. So helpful! I would be lost without your help!

[@WESTCOASTBC420]

What wire were you connecting to w blue/yellow wire? Otherwise it looks like i have to connect to k1 k2 and possibly have to solder a headphone jack for the 3.5mm. All this new stuff is so different from the easy ol days

[@franklinurrea8033]

Im using a Blankpaunt Dakota unit and does not have 3.5mm jack. It has an SWC1 orange, and a SWC2 brown. Which one do I hook up the blue/yellow wire coming from the interface? TIA

[@1drhnsd1]

Once the SWI-CP2 is installed and working, how do you custom program a long-press button? I want to program a button to activate the voice control of my radio. It shows as an available programming option (Alpine radio #14 option on your list). I read the instructions - it's not clear to me. Can you help please? Thanks,

[@dglr2548]

hello I have a question I hope you can answer me I have an estuary that is not of any brand that appears in the application to configure, there way to configure this if my esterio is not of any of these marks?

[@justink8536]

DEAN OR FERNANDO!!! PLEASE HELP ME I have a Kenwood dnx576s with 6 outputs in the back, hooked up to that is a skar audio skv2 200.4 and I have 4 spx 65c and 1inch aluminum tweeters the speakers and wired via crossover, my speakers play very low like I can barley hear them at full volume when I plug my 4 channel rcas into the back of the head unit but I have a 3.5mm to rca and when I plug my phone into my amp it plays fine idk what the issue could be other then my car came with a axxcess asw1 steering wheel control retainer, or the low level outputs are fried which I don't think is the issue any input would be greatly appreciated. I have been watching your channel and searched for months for a video on this but can't seem to find one. I ran all my own speaker wire, the asw1 that is hooked up in the back they cut the blue wire and connected it to the blue white remote wire idk if that something to do with it but I positaped into the blue white wire.

[@alexandernewsome1581]

Automatic Wire Strippers😍

[@ThePredatorProject]

I have a 2014 Chevy Cruze & because the way its designed, a LCD monochrome display sits above the radio. I've read on the PAC website it says "the LCD screen display will not be retained" however, it still displays the date and time, it just won't display radio functions through the LCD display. My question is, using the RP5-GM41 PAC harness, will there be a way to access the system configuration/personalization menu (Time and Date, Vehicle Settings; i.e. remote unlock feedback, vehicle locator lights, etc.) after a aftermarket headunit is installed? If this is possible, how would you do so?

[@Bluemoonrealtygroup0617]

I pretty much did not understand anything after you finished the discussion of the app. All the wiring discussion was very confusing.

[@dirklerxstpratt2112]

He's very good but I could use a for Dummies version that shows the cutting, soldering, and wrapping up the wires in more detail.

[@carsondoran6994]

My daughter just got a 07 Murano and I want to change her radio. Dose pac have a kit that keeps the upper display screen operational

[@maxlezama9160]

carson doran I think only metra makes a dash kit at the moment. It's a fairly big dash kit. It is going to be metra part 99-7612 if the dash is silver or 99-7612b if it is black. Not sure if any other company makes it.

[@theuop2511]

i have a 04 x5 4.4i bmw, i did away with the navigation / audio factory head unit and i wired the stock alpine amp to a signal amplifier that is feed from an equalizer i have in the front that i connected to a blue tooth dongle i have connected to my phone. i wanted to know if there is a blue tooth steering wheel adapter available that works without a head unit to control the steering wheel controls?

[@FiveStarCarStereoInc]

Yes check out Nav-Tv SteerBlue

[@theuop2511]

+Five Star Car Stereo thanks

[@franciscoortiz6980]

nice video, but did this steering wheel have any phone controls? does the pac cp2 support the phone controls?

[@FiveStarCarStereoInc]

Francisco Ortiz yes it did, depending on the radio it will do voice, answer, and hang up

[@orlandopolanco2436]

Hey Dean, do they create an adapter I can use to have my steering wheel controls mimic the hitting of the home button or map button on my 7000nex? I know I can get the usual volume up/down and next /prev but can the adapter send the home or map button signal? Thanks

[@scarface11385]

Car not listed what can I do next ?

[@ndp830207]

Where would you recommend I purchase a pac audio RP4-NI11? Around how much should it cost? Thank you.

[@FiveStarCarStereoInc]

ndp830207 you could try a local retailer or Amazon

[@ndp830207]

Ok, thanks. Which dash kit would you recommend for '13 Altima? Best Kits or Metra?

[@fidencioroblero7478]

Quiero saber cuales son los colores de cables de un nissan pathfinder 2007

[@lemueltorrescrispin8095]

I dont know what is wrong my radio just goes crazy when i connect connect and the light stays on red

[@rossip22]

Beware: Bought this device. On the movie it seems good, but when I opened the beautiful Chinese package & connected the device via an USB cable to my PC, the Autoleads SW showed: "Device Connected: None!" The software started blinking not allowing you to do anything, neither open the Firmware menu or anything else. The LED light on the device was blinking in green. Total waste of time & money! At least Autoleads should check the Chinese production.

[@larryd4196]

Why does the app need to know my phone history, .... device info?... WTF EVER! Worse than the Feds!