RC Heli Pitch and Throttle Curves Explained! (and Normal and Idle-up/3D Mode)

  Рет қаралды 14,955

Painless360

Painless360

Күн бұрын

Пікірлер: 33
@andreabenvenuti7940
@andreabenvenuti7940 Жыл бұрын
It is so nice to listen to your explanations. For us newbies is a source of fresh water which we are thirsty of...thank you so much
@extraterrestrial546
@extraterrestrial546 2 жыл бұрын
Extraordinary! This is exactly what I was looking for. You have an unique way of explaining stuff to beginners. Good job 👍
@hulkgqnissanpatrol6121
@hulkgqnissanpatrol6121 6 ай бұрын
I thought it was something like this but obviously there's a lot more to it and not to forget the practice! Thank you 👍 It helped a lot
@KoenvanderKouwe
@KoenvanderKouwe 2 жыл бұрын
Nothing new for me personaly but a very clear explanation. Thanks
@Painless360
@Painless360 2 жыл бұрын
Thanks for the comment. This is aimed at those unfamiliar with the topic. Happy flying!
@KoenvanderKouwe
@KoenvanderKouwe 2 жыл бұрын
I know, but like to watch it anyway. I do have a lot to learn about drones
@billthebutcher6873
@billthebutcher6873 Ай бұрын
Why is my throttle up and down inverted on my controller? When I push down heli goes up and I push down heli goes down. I'm so confused why it's doing this and blades and head is installed properly. Thanks
@Painless360
@Painless360 Ай бұрын
Sounds like the throttle swash mix is backwards... Best of luck
@MCsCreations
@MCsCreations 2 жыл бұрын
Pretty interesting indeed, Lee! Thanks! 😃 Stay safe there with your family! 🖖😊
@serviceoverself2375
@serviceoverself2375 7 ай бұрын
Thanks man. I am on my way now. Great job!
@johncarold
@johncarold 2 жыл бұрын
Thanks Lee for the information on throttle curves, I was given a, BLADE 300X I need a receiver and gyro and it will be flying.
@johncorson6599
@johncorson6599 2 жыл бұрын
Thank you .. cool stuff .. may be experimenting with such soon hopefully
@keithkamps77
@keithkamps77 2 жыл бұрын
Great info for those who are getting into the Heliers hobby. I don't setup any negative whatsoever for any IDLE up with a new help just in case I hit the switch by accident or I made a mistake in the build. I really like your demo heli I just can't stand electric driven Tail Rotors they are too glitchy for my liking.
@Painless360
@Painless360 2 жыл бұрын
Thank Keith, I wanted to help those who wanted to get into this side of the hobby. Not a lot of content for modern helis at the moment so wanted to cover all of the common questions I got.. Agree on the tail rotor, variable pitch and shaft driven are my preferences too.. Happy flying!
@jridge16
@jridge16 11 ай бұрын
I'm a brand new beginner to CP helis (have flown some FP helis to get orientation) and now have Blade 330X I'd like to start flying. Do you have a video describing what setting to use on a first CP heli?
@Painless360
@Painless360 11 ай бұрын
Don't go for crazy high head-speeds and setup the head to give you -2 to about 8 degrees pitch movement max...
@barkvarkie_fpv8623
@barkvarkie_fpv8623 5 ай бұрын
So now, two years later, and MicroBeast 5.4 does not allow the throttle and pitch to be on the same channel. How do we now setup "normal mode"?
@Painless360
@Painless360 5 ай бұрын
kzbin.info/www/bejne/iWHaootto9KdhNE or kzbin.info/www/bejne/eomrc4avht6beLM All my videos are easy to find with a search. Best of luck.
@barkvarkie_fpv8623
@barkvarkie_fpv8623 5 ай бұрын
@@Painless360 OK thanks. Will have to watch it a few times.
@howintesting940
@howintesting940 Жыл бұрын
Nice vid ! Thank you. Does direct driven micro heli have governer?
@Painless360
@Painless360 Жыл бұрын
Depends on the ESC fitted... Happy flying
@howintesting940
@howintesting940 Жыл бұрын
@@Painless360 to your knowledge, is there any RTR direct driven micro heli on the market with governer? Thanks.
@MikeG4936
@MikeG4936 2 жыл бұрын
What is the "Gy" curve? Something to do with gyro gain?
@rudolphfranken1446
@rudolphfranken1446 Жыл бұрын
Hello Thanks for the explanation, I'm a beginner, I bought the m2 Evo, also the digital pitch meter. as I do now, I put the heli (trotle of ;-) ) in Idle 1 and then via the flight controller, min and max 11 degree pitch. then in normal mode it automatically has less negative pitch, also slightly less positive, and in idle up 2 also slightly less pitch up and down. I still fly in normal mode (horizon), and sometimes, high in the air idle up 1 to practice. My transmitter (zorro) set the store. my question: am I doing it right by setting my max pitch in Idle up1? Mvgr Ruud
@Painless360
@Painless360 Жыл бұрын
You can setup the Heli in the way that suits you. The main thing is to have -2 to about +9 degrees in normal mode and then equal positive and negative in the idle up modes. Pilots setup IDLE1 and IDLE2 differently depending on how they want to fly it. For me, I just use one IDLEUP setting and normal for take-off and landing.. Happy flying!
@aviphysics
@aviphysics 2 жыл бұрын
Could a heli have a range/endurance advantage over a quad, for a similarly sized craft? I'm not sure what it would look like, but as I think about whether or not to build a long range quad, I also wonder if maybe a long range heli would have some advantages.
@bensonblair
@bensonblair 2 жыл бұрын
I suspect there will be quite an advantage to the helicopter but speed will be important. One of the thigns a helicopter benefits from, far more so than a quad, is translational lift. What this means is that as a helicopter picks up speed it can actually reduce its power draw due to this induced lift from the forward airflow through the blades. Testing is the only way to be sure but my money is on the heli. You may ask why helis are used so much less than quads. Well, they are much harder to set up and much harder to maintain. So, like all things, there are compromises to both helis and multirotors.
@dimitrybattesti7930
@dimitrybattesti7930 Жыл бұрын
Bonjour monsieur j'ai un T-Rex 450 et je cherche comment on fait un coupe moteur sur n'a radiolink ta10ll pour éviter les accidents svp 😢
@Painless360
@Painless360 Жыл бұрын
I don't have that radio here but this video looks promising - kzbin.info/www/bejne/iKqvlX6wgdWGsKM
@llarez905
@llarez905 2 жыл бұрын
Is it possible to get pot 1 (s1) to control for example the normal throttle curve when you hover?
@Painless360
@Painless360 2 жыл бұрын
Probably. What is it you are trying to do? I'd add a small offset using the rotary control to fine tune. I use curves to have a more precise hover control. See my videos on it.. Best of luck
@theafro
@theafro 2 жыл бұрын
3D helicopter flying is a bit like throwing a wad of cash into the air on a gusty day. You might get it all back but you're probably going to come home poorer, maybe a lot poorer!
@HeliZero
@HeliZero 2 жыл бұрын
I do not like the helis with a motor on the tail .. im into helis because of the mechanics - shaft or belt driven tail with variable pitch. ;o)
Is going from Quad to Heli easy? What about Heli to Quad?
8:11
Painless360
Рет қаралды 3,8 М.
Back To The Basics! How To Setup Your Helicopter As A Beginner!
13:13
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
freddy can fly (throttle and pitch curves)
14:49
Freddy Cordova
Рет қаралды 103 М.
freddy can fly (3d throttle and pitch curves)
7:16
Freddy Cordova
Рет қаралды 30 М.
Building a DIY REAPER Drone... Ended Badly
9:19
Michael Rechtin
Рет қаралды 2,4 МЛН
All Metal RC Helicopter is ONE OF A KIND - JCZK 300c Pro
13:41
Jay Kujan
Рет қаралды 195 М.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН