PAINT kitchen cabinets Perfectly FOAM ROLLER review

FOAM ROLLER review painting Cabinets
Support channel with PAYPAL donation: [e-mail]
BUY COMAN KX3636 Tripod HERE! Amazon Link: amzn.to/3dIAv64
BUY Panasonic HC-X1500 4K Camcorder HERE! Amazon Link: amzn.to/3QCUy4f
BUY HC-V180K Full HD Camcorder HERE! Amazon Link: amzn.to/3ewA7nP
GoPro HERO10 Black HERE! Amazon Item link: amzn.to/3Cedq55
Buy Panasonic 4K Camcorder HC-WXF991K HERE! Amazon Link: amzn.to/3PuXL4n
CyberLink PowerDirector 20 HERE! Amazon Link: amzn.to/3dELRrq
BUY Sony FDRAX53/B 4K Camcorder HERE! Amazon Link: amzn.to/3AukDNh
Buy Viltrox Lighting HERE! Amazon Link: amzn.to/2MW1FpH
Buy Sony Cyber‑Shot RX10 IV HERE! Amazon Link: amzn.to/3QEsJZy
Buy Sennheiser MKE 400 Shotgun Microphone HERE! Amazon Link: amzn.to/3c3jrqE
Store Link: www.amazon.com... NEW LINK BELOW FOR 2022
Support channel with PAYPAL donation: [e-mail]
BUY COMAN KX3636 Tripod HERE! Amazon Link: amzn.to/3dIAv64
BUY Panasonic HC-X1500 4K Camcorder HERE! Amazon Link: amzn.to/3QCUy4f
BUY HC-V180K Full HD Camcorder HERE! Amazon Link: amzn.to/3ewA7nP
GoPro HERO10 Black HERE! Amazon Item link: amzn.to/3Cedq55
Buy Panasonic 4K Camcorder HC-WXF991K HERE! Amazon Link: amzn.to/3PuXL4n
CyberLink PowerDirector 20 HERE! Amazon Link: amzn.to/3dELRrq
BUY Sony FDRAX53/B 4K Camcorder HERE! Amazon Link: amzn.to/3AukDNh
Buy Viltrox Lighting HERE! Amazon Link: amzn.to/2MW1FpH
Buy Sony Cyber‑Shot RX10 IV HERE! Amazon Link: amzn.to/3QEsJZy
Buy Sennheiser MKE 400 Shotgun Microphone HERE! Amazon Link: amzn.to/3c3jrqE
Store Link: www.amazon.com...

[@mycats7321]

It would have been easier to see the coverage of the paint was a different color than the primer or previous coat. I found when using high density foam rollers one of the problems was that a couple minutes after starting, the roller would start to actually suck paint back up or remove some of it while trying to smooth out any visible lines. Hopefully that won't be as obvious when I do the 2nd coat though. But it was supposed to be a single coat paint.

[@robbiefrancis3568]

Thanks for the advice. However, painting white paint on a white door with a white roller....in a white room does make it a bit difficult to see the result!

[@seanlo8330]

shure46 i wanted to say the white man joke 😂

[@maxinerutherford9790]

😂😂

[@mikeg1433]

With white gloves on. My guy would be camouflaged completely invisible in that room

[@floridaregisteredagent9488]

I use foam rollers because they leave no marks and I never have a problem. Ive never ever had a foam roller fall apart during a project.

[@ThePerpetualStudent]

I think it meant a foam brush.

[@Charlie9165]

Nice Video. Thanks

[@singlefather01]

Nothing beats HPLV spray. It is silky smooth. I apply primer with foam roller only, since it is alcohol based.

[@dericanslum1696]

...use them for application and lay off with a brush if you can't roll off properly with the roller...also knowing how to lay with the roller will reduce the "smearing" issue...light even pressure works best...

[@RH123123]

Using a high density foam roller with a tray a little wider than the roller (where you have room to roll out the paint) gives excellent results. I do this all the time and I am not aware of all the problems shown in this video.

[@BurtBowers]

How did they all turn out none of them had air bubbles?

[@BurtBowers]

Foam rollers can leave air bubbles in the paint as you say i like using 4" 1/4" nap rollers leaves smooth finish next best thing to having them spray painted.

[@nikups6418]

Old Timer Air bubbles come from over working the roller or pushing too hard.

[@americarocks1776]

@@nikups6418 I lightly lay the paint with the foam roller and there are tons of air bubbles in the first roll alone.

[@joejackson9986]

@@americarocks1776 you’re doing it wrong.

[@andreasilzer8254]

Thanks for the review, I'm just painting my cabinets in the bathroom, I went out and bought a foam roller. Curious on how I do with it.

[@LEARNINGCHORDS]

good luck miss A

[@Discovery123.]

I am painting the doors, and windows trims with high quality paint using brush and roller but very unhappy with the result. I am going to try this foam roller again. Thanks

[@LEARNINGCHORDS]

the foam roller is a very hard thing to use.. it slides all over and i hate it... USE a very low nap 4 or 6 inch roller. you will love it.. takes forever with the 4" but you will love the results

[@thexflexclan]

You should you the microfiber roller 4 in the while and blue lines it will give you a nice finish

[@garpikemike1]

You paint them with a brush then take a roller like that which is dry and roll over it. Try it. Way better.

[@LEARNINGCHORDS]

that is what i ended up doing

[@calvinquesnel198]

I buy the foam rollers at Dollarama and have never had a problem with them.

[@FarhanKhan-if9ey]

Using a white color on white interior is good example for Foam Roller review. (Y)

[@matteo76usa]

Hi i tried to use foam roller but leaves kind of orange peel on cabinets, now i am trying the high density roller and it seems better. Just a question: sometimes when i try to paint the side the roller don’t spin, it just slides, why is that?

[@matteo76usa]

LEARNINGCHORDS Hi , i have a little problem now, i painted 4 doors so far in grey, the only thing the first two are much darker than the second two! On all of them i did two coats of primer and two of paint.. any idea why?

[@inglouriousmofo]

@@matteo76usa You need to mix your paint as you go. Also couldve been thicker as time went on.

[@inglouriousmofo]

Too much or too thick of paint makes rollers slide.

[@seatime674]

I bought a brand new foam roller and after I painted 1 cabinet door the whole thing fell apart

[@galactic904]

I saw on Home-Depot website the "6" High-density Foam Roller", but your video is 4". Does it matter much? My project is Melamine Kitchen Cabinets (low-price standard cottage cabinets). I wanna leave the doors on and just roller baby, roll. In a few years, purchasing new cabinets anyway.

[@galactic904]

Thanks, i'll do that. My girlfriend will be so happy... well I shouldn't take all the credit, you will have an honorable mention for sure

[@jacquelinen1131]

I was looking to see the roller you were using… why all the links for everything but? 😞

[@MW-pv7rm]

Use Benjamin Moore Advance paint in satin and use a sponge 3-4” and you’ll have a perfect finish. Absolutely no brush strokes.

[@LEARNINGCHORDS]

i agree but most people can't afford that paint

[@americarocks1776]

@@LEARNINGCHORDS Most people can afford it. It's $45 a gallon. That's about standard.

[@americarocks1776]

I have had bad results with Advance. With a foam roller there are tons of air bubbles. It is thick so brushing leaves marks. I have tried velour rollers and the roller leaves small pieces of material in the finish.

[@cleoburrows]

@@americarocks1776 I'd like to know where you found it for $45/gallon. Where I am it's $98/gallon

[@davo912]

@@americarocks1776 leaves brush marks? not a chance with Advance you are doing something very wrong

[@kaycox5555]

Helpful video, thanks for sharing.

[@COH2000]

i don't see any links to the painting products in your description. Seems like you want to provide us with links to the video equipment only? Did I miss something?

[@LEARNINGCHORDS]

I bought these at home depot. I am not sure one could find this on amazon with this exact product... other companies I am sure sell them but I did not add a link

[@TheHelado36]

The air bubble issue messed my project big time !

[@americarocks1776]

mine too. Foam rollers are useless.

[@galactic904]

Thanks so much guy, your the best.

[@balgrantango460]

Very helpful, thanks!

[@michellejohansen6281]

Thank you so much!!! Great video 😄

[@hlg_theshepherd2873]

Spraying is best

[@tsnstt]

Great video!! Just smashed the like button!! Can you please provide link to purchase? Thank you, sir!!

[@LEARNINGCHORDS]

i would love to but online costs a fortune. try to find it in a store at a much cheaper price

[@jesus.maryandjoseph8880]

Does this have any "orange peel" kind of text at all or is it pretty perfectly smooth? Is it close to a spray-like finish? Can't tell the texture of the finish at all in the video. Camera too far away, and need a better side angle, with light on it to see it properly.

[@LEARNINGCHORDS]

THESE are very hard to use. they slide all over the place. I had no orange peel or texture- but this is not easy to do

[@ftnirish74]

17 cabinet doors? Two words...airless sprayer. The time and material saved on top of a great finish, the buy will pay for itself after 1 project.

[@LEARNINGCHORDS]

if you are a pro and know how to use one and have the money then good- most people without experience can't use one properly. also you have to MASK up everything and you have to wear a mask... health wise no thanks. I have a dog- i dont need paint beads in the air. if you want a great airless job then unless you do this type work often- hire someone to do it for you... that is like saying if you want a great running car- rebuild your engline... without experience most people should stick with what they are good at

[@ftnirish74]

@@LEARNINGCHORDS I completely understand. It's not as pricey or difficult. I bought an Avanti HVLP from Harbor Freight for $49.99 after coupon and a Homeright Spray Shelter off Amazon for $59.99. They make smaller ones but I liked the shelter as I close the flap to contain overspray. Zero mask or plastic in my garage. Works perfectly.

[@judymiller5154]

@@ftnirish74 thank you. I have 29 doors and 13 drawers!! If I can set up our "shed" as a spray room with hangers, maybe I won't have to spend a year painting my kitchen 🤣😂🤣

[@millikenway]

Painting a white on a white is kind of hard to tell.... anyway, still an informative vid.

[@pjflintstone9310]

will this work on oil based semi-gloss or will the solvents in the paint melt the roller?

[@meagan8989]

P J Flintstone no it won't melt

[@oldproji]

I use foam rollers and then lay off the paint with a dry bush for the hand painted look.

[@jonathanchartrand3351]

You can't see how much paint he is applying to the roller.

[@orangeziggy599]

Hi, are you using a funnel that has been cut in order to put from the paint can?

[@floridaregisteredagent9488]

Youre painting against the grain and not with the grain 😲

[@oldproji]

The doors are probably MDF. No grain.

[@billprezioso3677]

Pro tip forget the foam roller and use a velour roller from Sherwin Williams or Ben Moore and you are also using the wrong type and grade of paint it’s going to chip very easily, use a hybrid alkyd paint and put a coat of water based polyurethane as a topcoat

[@golf18mike]

where can I buy these? Looking at HD and online but cannot find them. HELP I'm getting ready to paint my cabinets.

[@veronicaw8105]

LOWES

[@ranich7524]

Home Depot has them in the store as well

[@joelananias]

lower, just bought them

[@RickMahoney2013]

Wrong frame for that roller or wrong roller for that frame

[@LEARNINGCHORDS]

incorrect... just junk... that is the problem

[@juliedickerson2333]

Killing me - white paint on white cabinet and bad angle....ugh

[@mijit.859]

Are they ok to use with gloss acrylic paints ?? 😨

[@mijit.859]

LEARNINGCHORDS hmmmm 🤔 Anyways

[@williamcharles9480]

No air bubbles? I can't figure out what utopia you're living in because I didn't have that incredible finish, I had air bubbles and figured that at least there would be a mention of how to avoid this issue.

[@joelananias]

sand it with 320 grit sand paper and repaint

[@garywilliams9579]

If using gloss paint, once the coat has been applied, wait a moment and then very gently run over it with the roller (having been sure not to add any more pain), or simply use a dry clean brush to lay off. This person has little idea how to apply it properly. Work in 6-9 inch squares and blend them into each other. Most foam rollers result in the same finish if used correctly.

[@enjoy9772]

Every time someone boasts about foam rollers it's always the same. Never have any light reflecting off the product. Could have used a 10" roller with 3/4 nap and would seem smooth in this video with no light. @ 5:14 look at the bottom left corner with light reflection. Looks terrible. I wouldn't call that smooth.

[@LEARNINGCHORDS]

i am an expert

[@morganbitol8449]

Hello sir can i use this on varnis??

[@LEARNINGCHORDS]

you might end up with a lot of bubbles. test it on something before you do

[@morganbitol8449]

@@LEARNINGCHORDS ah okie thanks sir..

[@calvinquesnel198]

Buy at dollar store.. 1.99

[@nikups6418]

You’re painting against the grain and pushing too hard. You also need to prime those foam rollers first.

[@neshmahenkel2428]

Can I store up my foam roller with the primer in the fridge ir is that only for paint? Thanks

[@strikerz2912]

Foam rollers just skid, they don’t roll

[@LEARNINGCHORDS]

they roll depending on how you do it.. the pros use foam and they have no problem

[@pennysmith2012]

Never do cabinets look good when brushed or roled

[@pennysmith2012]

Rolled

[@CFL35]

I got air bubbles dammit

[@mijit.859]

Puppy That’s what happens when you use gloss acrylic enamels with a foam roller sleeve !! I know from experience etc. What I do is roll it on first & then lay it off with a paint brush ! I hope that helps !! 😨

[@joelananias]

sand with 320 grit paper, light sanding and repaint

[@joeytwosubs]

This is nonsense from a nitwit! Foam rollers do not fall apart as stated here! Why didn't you say they explode! They don't do that either!

[@HamelAshley]

I disagree! Such a bad finish with those rollers

[@LEARNINGCHORDS]

u r way too cute and yes i agree with you