10 Useful BEGINNER Tips for Using a PAINTBRUSH!!

  Рет қаралды 3,773,058

Vancouver Carpenter

Vancouver Carpenter

Күн бұрын

Пікірлер: 2 000
@RileyNA
@RileyNA 4 жыл бұрын
Dang it. I've been holding the bristled end and painting with the wooden end. Thanks so much!
@HouseToWhat
@HouseToWhat 4 жыл бұрын
Lol, that cracked me up.
@TubbysWorld4413
@TubbysWorld4413 4 жыл бұрын
😂✌
@hijodelaisla275
@hijodelaisla275 4 жыл бұрын
"I see that all the time."
@lydiar1549
@lydiar1549 4 жыл бұрын
LMAO
@Chelsleen
@Chelsleen 4 жыл бұрын
classic Australian mistake.
@tilerman
@tilerman 3 жыл бұрын
I work in construction and decorators always seem to be at the bottom of the pile, earning the least, and yet, it's these guys that actually makes any job look the way it does. No one, walks into a finished job and says, 'wow, the first fix electrics look's amazing'. A brilliant decorator i know can paint one wall in black, the other in white, and the join where they meet is bullet straight, and he does it in seconds. Absolute perfectly straight. You try it. These guys need way, way more credit.
@jamesfolan3319
@jamesfolan3319 2 жыл бұрын
Well said I'm a dec for 30 years a d we are the guys who.sort out the snags that other trades balls up
@johnb9624
@johnb9624 8 ай бұрын
it's so hard to get a straight edge when it's two colours just done it today took me hours and it's still crap
@bleebleeblahblah
@bleebleeblahblah 7 ай бұрын
I certainly can't do thaaaaat (straight lines).
@indyfosho5458
@indyfosho5458 5 ай бұрын
I know, and it's crazy how it's one of the easiest mindless trades of work right?!?!
@jared123123
@jared123123 3 ай бұрын
There’s nothing super hard in the trade for sure, but come do some high pressure sand blasting on a pipeline or a big plant in an industrial setting. Or have to spray finicky coats in super cramped odd angles etc. There’s a fair bit of skill to it too. Commercial painting is fairly straightforward though
@edd2771
@edd2771 4 жыл бұрын
I’ve done all my own painting for years and had picked up on most of what you said through trial and error and experience. One thing I never knew though, was to wet your brush first. I always thought a brush had to be completely dry. And now that I know that it’s ok to wash your brush mid- job, my cleanups will be MUCH easier. Thanks.
@rheeneek
@rheeneek 4 жыл бұрын
Me too. I think it'll make things way easier lol
@edd2771
@edd2771 3 жыл бұрын
@Clay Fox Nope. Dip it and shake it out by hitting ferrule on the edge of a bucket. Excess water will be gone, paint will come off brush better and the brush will be far easier to clean.
@barbaraedmondson1524
@barbaraedmondson1524 3 жыл бұрын
I never knew to wet the brush either
@EliteStricker
@EliteStricker 2 жыл бұрын
@@barbaraedmondson1524 you want to wet the foam brush rollers also, sometimes can have loose fibers and when you paint can get caught and stick.
@kayannwetzel2792
@kayannwetzel2792 2 жыл бұрын
I am with you. Never realized that you can wet brush before starting. Nor did I realize that you can wash the brush mid job. Did you know that you can urethane the handle of your new brushes to keep paint removal easy?
@robertgaylord8263
@robertgaylord8263 Жыл бұрын
My father, who was a professional painter, taught me your cutting methods. I had to watch to see if you were doing it to the quality expectations he had for me. You were. He taught me in the 1950's and watched over to ensure I was doing it correctly. Same thing with rolling the wall. There was the wrong way to roll and the way he learned in his trade school after he returned after WWII. Thanks for continuing the fine tradition. He would have approved. He also taught me the correct way to wallpaper a room. He was a master and did papering and murals in numerous lovely homes in our hometown.
@paulsaucier3095
@paulsaucier3095 3 жыл бұрын
I have been painting for almost 30 years and for the first time watched someone on KZbin paint the same way I do. Great instruction!
@luistobar7
@luistobar7 3 жыл бұрын
How is the cost of painting a room , house, or wall figured out? Does it go by square foot?
@curlywurly1071
@curlywurly1071 2 жыл бұрын
@@luistobar7 well they wanted to charge me $400 for the kitchen. lol figure I do myself.
@Corinthians-kjv
@Corinthians-kjv 2 жыл бұрын
How do you roll a flat untextured wall?
@paulstevens2671
@paulstevens2671 2 жыл бұрын
@@curlywurly1071 in oz it's $200+ 10 ltrs 1 tin,just over 2.5 gallons
@stephaniecoomey2356
@stephaniecoomey2356 29 күн бұрын
@@paulstevens2671 i wouldnt get out of bed for $200
@0lddragracer426
@0lddragracer426 4 жыл бұрын
Mike's Painting Service - A good general video for beginners. Respectful tips: Don't scrape the brush on the side's of the can. Dip the brush about 3/8" inch, then tap it on the inside to load the brush with paint. Scraping will eventually start curling the brush hairs also. When applying, instead of painting completely straight with your line, try about a 30 degree angle, and get your brush hairs cutting a perfect line. Righty's usually go from left to right, and lefties the opposite. I use those hand held paint pots with liner's....the best. The term is, "Picture Framing." Don't make your paint line too wide, or you will see it when you roll the rest out. In a bathroom, you should prime it first, because of the high moisture. I use "Gripper." There are also oil base sealers, but they take longer, but work excellent. But over-all Ben, as usual...good job. I watch your video's every day, and learn.
@SmileyBlue69
@SmileyBlue69 Жыл бұрын
This comment made me smile in agreement. I was crawling watching him cut in left to right. I'm mainly right handed but cut in right to left. I can't see that changing as it works for me. But most decorators are good with either hand and flip the brush either way depending on what's needed. While I'm still crawling at cutting in left to right, irony is I paint woodwork left to right. Love that after many years decorating, you still keep learning. Last comment was I didn't feel he feathered enough. The hard line was only kind of broken,
@NormanRamsey
@NormanRamsey Жыл бұрын
Dumb question: When you are tapping the brush on the inside, what are you tapping? The tips of the bristles? The ferrule? The handle?
@freespirit1975
@freespirit1975 Жыл бұрын
@@NormanRamsey Don't tap anything. Dip the end of the bristles in the paint about a 1/2 to 1 inch, then shake off back into the can by kind of slinging it down off the brush. This loads up the brush. Don't touch the sides or the rim. That's how I was taught to do it when I worked on a paint crew during the summers while in college.
@cpoul
@cpoul Жыл бұрын
How wide should your paint line be?
@michaelsteinberg2125
@michaelsteinberg2125 Жыл бұрын
A couple of inches is fine. Just so you can cut it in with a roller.@@cpoul
@susanmyrick2913
@susanmyrick2913 4 жыл бұрын
You make me so happy, because I am self taught and I do exactly what you do...my husband yells at me all the time for not taping, even tho I tested him to see if he could tell which wall was taped and he failed. I am making him watch this video. 👍
@mitchjohnson4714
@mitchjohnson4714 3 жыл бұрын
I stopped taping because taping was making it worse.
@MrEazyE357
@MrEazyE357 3 жыл бұрын
Taping sucks and is completely pointless if you're good at cutting in.
@siraantomlinson6875
@siraantomlinson6875 2 жыл бұрын
Agreed, I find I get better results from cutting in without tape! During the learning curve I was carrying a metal scraper and a wet cloth to tidy up as I went where I messed up cutting in but doesn’t take long to get the hang of it!
@coinholio6863
@coinholio6863 2 жыл бұрын
Professional brush and roll teams do not use tape. Tape is generally used for Faux finishes that have a lot of layers of plaster and other materials. I would not do Faux without it!
@royleevaughn2990
@royleevaughn2990 8 ай бұрын
Great teacher.... love the video.... the kid is sharp and motivating.. As a long time painting contractor i was taught many years ago not to use a paint can to paint out of, instead use a paint pot.... also never wipe the brush but instead load it and tap it on the side of the pot to maximize the load... Lastly on the ceiling cut sometimes its good to lay on an underline of paint about an inch below where you cut then cut. As the brush travels it picks up the underline and distributes more evenly.
@glorianolan3118
@glorianolan3118 Жыл бұрын
At 79 years old, I actually believe I can follow your instructions and paint my little guestroom before my guest arrives in a few weeks! I really like the little painters stool you use. I will get one of those those. Thanks!
@SmileyBlue69
@SmileyBlue69 Жыл бұрын
Have you made a start? You can do this! 🙂
@junefletcher
@junefletcher 4 жыл бұрын
I'm not a beginning painter, but I still learned a few things from this video. He's a good teacher, not repetitive like some.
@tsnstt
@tsnstt 4 жыл бұрын
I love this guy. He is so smart. So genuine and so charming. This is the reason why youtube exists. No other reason. Keep making videos and keep those trolls away my good mate. Cheers.
@yanni246
@yanni246 4 жыл бұрын
I just have to say, your sarcasm is exactly on my level and it makes your videos so much more amazing
@dearthworm
@dearthworm 5 жыл бұрын
Pro Tips: I was a painter for awhile and have done a lot of my own home reno painting. I was taught to never wipe the brush on the paint can lip. You're scraping all the paint off that you want to deliver to the wall, and I was told it causes the brush to lose it's shape and get fuzzy. As shown, use a can with only an inch or two of paint. Dip the brush and quickly slap it back and forth a couple of times on the sides of the can (inside the can). This fluffs up the brush, charging the INSIDE of the brush with paint and leaves less paint on the outside of the brush to drip. The paint inside the brush is much less likely to drip off than paint hanging on the outside. You can heavily charge the brush and it won't drip, at least for a few seconds while you're moving the brush to the wall. Then if you're doing detailed work like cutting, and your newly charged brush looks like it might drip, "dump" part of the load of paint along the the line you are about to paint, i.e. just quickly dab it or brush it to put the excess paint aside for a moment while you start the cut. Then you can pick up that extra paint while moving along the cut line without going back to the can. If you're using latex/acrylic paint (which is pretty much all that is used now), don't try to do all the cutting in a room first, and then do the rolling. The cutting paint will start to dry after a few minutes and will skin over or dry enough to leave edge lines, brush marks, as VC showed in the video. I cut as much as I can reach from my stool, and then roll that area, then cut the next area, and roll that area. Another important thing when painting is to learn do the 'painter's shuffle'. When moving around the room that has open paint cans, open paint trays etc on the floor, if you need to move your feet and when you're looking up and can't watch where you are stepping, you gingerly SLIDE your feet like a ballerina, so you don't step into or kick over a paint tray or bucket.
@elmerdane
@elmerdane 5 жыл бұрын
I didn't read all of your comment but I can tell you that you suck at painting. Call a professional painter you tasteless hack. Your poor tenants shouldn't have to live in what looks like a third-world country. Keep in mind it's just my opinion but I'm usually always right
@elmerdane
@elmerdane 5 жыл бұрын
You're right about this guy being a shity painter though
@bobbyc9960
@bobbyc9960 4 жыл бұрын
@@elmerdane I'm a general contractor and been around pro painters all my life and YOU ARE RIGHT.! Never wipe the brush.. Taking all the paint out and it will drip... Tapping on each side of can will keep the brush full and will never drip....
@lindalai9092
@lindalai9092 4 жыл бұрын
What a shitty comment/post.
@lindalai9092
@lindalai9092 4 жыл бұрын
@@bobbyc9960 Oh wow.... wow.... wow
@BrandiFultz-bq6er
@BrandiFultz-bq6er 5 ай бұрын
My daddy ran his own painting company ,following in his daddy's footsteps as did his brothers . I can hear my daddy's voice watching this video giving his directions and his corrections . He painted indoor ,outdoor ,barns ,fence ,roofs ,heavy equipment,and mining equipment. You name it ,he and his crew would paint it . When painting with brush or roller ,he would say "Put you some paint in the roller I can hear from over here ." "Dip that brush ,little further than that now you got it ". Anywhere we went ,he would point at something and say Me and your uncle Randy painted that or I painted that with my daddy when I was about 13. Miss him ,his stories and advice .
@skipperry7360
@skipperry7360 Жыл бұрын
Thank you for those excellent tips. Appreciate the water on the new brush for water based paint 🎉
@stevemassimini6314
@stevemassimini6314 5 жыл бұрын
Hey Ben, As someone who doesn't do this for a living but does do a lot of this in my homes. We just bought a house that needs a lot of painting. Your tips and tricks have definitely helped working with patching and working with mud. Thank you!
@jeffclements5495
@jeffclements5495 2 жыл бұрын
Thanks for making the video, I enjoyed it! A HUGE yes to buying quality brushes. I used mainly Sherwin Williams brushes for most of my pro career, but have since also used the better Purdy and Wooster brushes, and most recently Corona brushes (I cut in with either a 2.5 or 3.5 angled sash). Good quality brushes perform better, and if you take care of them last almost forever (I have several Sher Will brushes that are over 30 years old and still work great). YES to cleaning your brushes throughout the day. I use a small length of 2"X10", a wire brush, dish detergent (Palmolive, Dawn, whatever), warm water and a brush comb. If I'm storing the paintbrushes long-term, I spray the bristles with WD-40, comb it in with the brush comb, and put it in the shaper. The WD-40 carrier evaporates, leaving a light film on the bristles that helps keep them soft. YES, to tapping the brush on the inside of your cutting can rather than scraping the sides on the top edges. Tapping the brush gets rid of the excess paint but keeps the brush fully loaded for maximum efficiency. YES to coating wooden brush handles with urethane so they're easier to clean. YES to dampening your brushes before using them (although I don't always do that). However, if I pre-wet them, I get almost ALL the water out by spinning them between my hands before I use them (otherwise the water will run down off the brush onto your hand, arm etc). I always spin my brushes rather than tap them, on the brushes edge, on a bucket. Tapping them tends to loosen the ferrule over time whereas spinning them does not. YES to almost always thinning your paint or using Floetrol (latex paint - the paint spreads better and you get better coverage). YES to rubbing baby oil into any exposed skin that might get paint on it. Any dried paint basically just wipes off when you're cleaning up. YES to always using a good quality paint. And finally when it comes to stain blocking primers nothing can beat BIN Shellac based primer from Zinsser. It's expensive, but because it's alcohol-based the smell is tolerable, and it literally dries in like 15 minutes. Good luck y'all, have fun!
@Rajiihammr
@Rajiihammr 5 жыл бұрын
Veteran painter here. Good tips especially the wetting of the brush. However after wetting you need to spin out the water by hand or by knocking against your shoe for instance. Also, the cut-in bucket grip is essential, you just cannot drop a bucket with the pro-grip. Here's a tip; instead of swiping the brush against the rim of the cut-in bucket, press it against the inner wall of the bucket, then swipe just one side of the brush. The swipe is used mostly to straighten the bristles. Here's another tip: about 20 years ago I discovered that a Folgers plastic coffee container grips a 2 1/2" brush just like the magnet in your commercial bucket. Snap it into the grip area of the Folgers container, it's pretty good in a pinch. Usually I lay the paint on 1/2" from my target, then move that paint 1/4" closer, then into the edge with a tilted backwards swipe and finish with a light forward swipe. Cleaning up in the customer's sink and leaving a mess is always a good move.
@BrBill
@BrBill 4 жыл бұрын
Oh no, I hate coffee. I'd have to find someone to buy Folgers and drink it first. And unlucky me, most coffee drinkers I know are coffee snobs and wouldn't drink Folgers. Maybe I'll just buy some and pour it out in my garden so I can have the container 😉
@rayray8687
@rayray8687 2 жыл бұрын
@Roger Hammer: You might be a veteran painter but you are definitely not a professional painter.
@Rajiihammr
@Rajiihammr 2 жыл бұрын
@@rayray8687 Well, they paid me for 25 years, but I guess you know best.
@rayray8687
@rayray8687 2 жыл бұрын
@@Rajiihammr: I hope they didn’t pay you by the hour, lol. 1/2”, 1/4”, target - 3 times the work for 1 result. But I was actually referring to your suggestion that it’s ok to leave a mess in the customer’s sink and I can assure you it is NOT ok and will get you thrown off most job sites. The customer should be able to tell you’ve been there by the work done, not the mess left behind, plus it’s a simple and professional matter to store your brushes and rollers in airtight bags for reuse the next day or to take home for cleaning or disposal. Happy painting!
@Rajiihammr
@Rajiihammr 2 жыл бұрын
@@rayray8687 Apparently you didn't catch the VC's sarcasm about cleaning up in the customers sink at the 9:00 min. mark. There is no such thing as cutting in with one swipe. A pro does not apply directly on the ceiling line. The 1/2" swipe takes 3sec. in a 2foot swipe, return with brush held backwards with 1/4" swipe and finish with the ceiling swipe. All done in seconds. If you discount the technique, then you haven't tried it. I know what I'm talking about. And pay closer attention to the video watch out for sarcasm.
@kristinfredriksson1212
@kristinfredriksson1212 Жыл бұрын
I am thanking you BIG TIME for your videos which have educated me immensely. You present techniques and tips simply and coherently. I was updating 2 rooms in a 100 year old section of our house, which included weeks of paint stripping and staining some key wood elements in our Kraftsman house and painting walls and the MANY window and door frames in these rooms. It is almost finished (awaiting insulation installation this week), but I watched so many of your videos for this major project that my husband got tired of hearing my lauds about you and your channel. Big gratitude to you! Keep on doing these videos for us DIYers with frugal husbands who are unwilling to hire for jobs their wife learned how to do from you!!!
@johnsidwell2241
@johnsidwell2241 Жыл бұрын
One of the 1st things I was taught by my mentor when I began my decorating career in the 50s was never to wipe a loaded brush on the rim of a paint can,I was taught to tap a loaded brush on either side of the paint kettle/container.The reason I was given was that if you wipe a loaded brush on the rim you are removing the paint you have just loaded whereas if you tap the side of the kettle the paint remains in the loaded brush
@MsJustaskme
@MsJustaskme 4 жыл бұрын
That last tip is actually the tip I was hoping for. Washing your brush about every hour. I have found my brush getting so saturated if painting for long time. Thank you. That is when a brush 'spinner/dryer' would really be helpful.
@travisrizzler4897
@travisrizzler4897 3 жыл бұрын
I use hair conditioner on my brushes every few uses. It helps restore the bristles to like new. It also helps release the paint when cleaning them out.
@rc-guy2672
@rc-guy2672 3 жыл бұрын
This is painting science, and this is a graduate-level class! Really good how-to stuff!
@alexalb5256
@alexalb5256 2 жыл бұрын
I’m 40 years old re-learning slappies and paint tricks from the same dude. Btw: my kid and I love watching you and @giftedhater keep doing those collabs!!!!!
@frnz9808
@frnz9808 2 жыл бұрын
I've been a painter for almost 40 years now and I can say that we have the same process for painting. One thing different is that I wet my walls first by splashing a bucket of water and then pour paint over my body and roll over the walls meticulously.
@calliecooke1817
@calliecooke1817 2 жыл бұрын
LMAO. Have you seen "Red Green" video where he uses a hog trough, a fork lift, and a rolled carpet to paint his barn?
@KiwikimNZ
@KiwikimNZ 2 жыл бұрын
Hahahaha
@deniseburns8563
@deniseburns8563 14 күн бұрын
Thank you for this. Really helpful for us beginners. Don't know why the unnecessary remarks.
@oblivion31
@oblivion31 5 жыл бұрын
Great lessons for painters. And as you get faster and more efficient, you can tap the brush quickly on both sides of the cut can to remove excess paint, and still have plenty of paint on the brush. I’ve been a Purdy guy for years but have recently used Corona brushes. They seem to keep form and hold paint well. Of course it’s all how you clean it. And for rollers, please use 1/4in or 3/8in naps, no half inch! Will insure a much smoother finish. Takes a bit of learning curve to work with but so much better. Wooster Pro Doo Z are great naps.
@aaryajain4257
@aaryajain4257 4 жыл бұрын
Coronavirus
@abdulhai93
@abdulhai93 3 жыл бұрын
When we moved into our house 6 years ago, i painted my entire house basement to 2nd floor myself, it took 3 full days. Because i knew how to use the heel of the brush i was able to skip the taping part and get perfectly straight lines. Cutting is the most crucial part of any.paint project
@zeamikaele8623
@zeamikaele8623 3 жыл бұрын
Nahhh wrong. Nice opinion but it’s preparation...
@56wilfred
@56wilfred 3 жыл бұрын
@@zeamikaele8623 he can’t have done any prep work or a nice job to paint a whole house in three days. I’m a professional painter btw
@steve8803
@steve8803 3 жыл бұрын
Unless you have a tiny house, there is no way you can accomplish that. Prep time, ceilings, trim, doors and walls.. no.
@coinholio6863
@coinholio6863 2 жыл бұрын
A journeyman painter here. Thanks for the good video, I guarantee that beginners will not notice your hand position for holding a brush and just grab it with a fist, with the wood end downward by their little finger instead of upward through their index and thumb. I do a lot of different faux and scenic techniques and I always tell my apprentices to always look at how the instructor is holding the tool first! I use a "safety bucket" when up on ladders. That is, a 5 gallon empty bucket suspended by a hook from the holes in the top of the ladder. Then I put my paint can (even full) and tools in the bucket. Care is needed when moving the ladder but you can always nudge it along, if you need to move or flip the ladder, just unhook it. It is also important to always have a wet rag in one hand. And ALWAYS have your solvent (appropriate for your product) on hand. If you are using shellac based primer, then always have Denatured Alcohol, if using oil paints, then have mineral spirits, etc. KNOW your solvents. And never rinse paint of any kind, regardless of the small amount into a sink that leads to a septic system.
@markcheeseman419
@markcheeseman419 2 жыл бұрын
well done for mentioning laying off/feathering in the inner edge of cutting in. most other videos don't mention it. Decorating for 23 years and I see it often where a thick edge has been left. It gives a framing effect and the cutting in will show up on the finish.
@MilciadesAndrion
@MilciadesAndrion 10 ай бұрын
This video has been tremendously helpful to me while painting the exterior of my house. Your suggestions have not only saved me money but also enabled me to execute the job with a professional touch. I have acquired the materials through the links you provided. I liked the video and subscribed to the channel.
@manyirons
@manyirons 5 жыл бұрын
You're a fantastic teacher! I'll be using many of your tips in my upcoming renos. Thanks a bunch!
@aprilhoste1723
@aprilhoste1723 4 жыл бұрын
perfect, pointer i like to use my pinky to keep my cut in steady. and i've never heard anyone agree with me or explain word for word as i do keep doing you
@tomato_sauce_gaming2986
@tomato_sauce_gaming2986 3 жыл бұрын
My boss says to use my pinky
@usa5046
@usa5046 3 жыл бұрын
Agreed
@namithanandakumarful
@namithanandakumarful 3 жыл бұрын
This is way more helpful as you actually showed different ways, the pros and cons of these ways, and how to get a good job done. Thanks for sharing these tips!
@vaska1999
@vaska1999 Жыл бұрын
I'm about to paint a few rooms in my tenants' apartment and your tips have come as a God-send. Thanks! 👍🙂
@rumimoinuddin8228
@rumimoinuddin8228 2 жыл бұрын
Thank you so much for doing this video. I've watched a bunch by other painters and you're the only one who explains what's he's doing and why and shows us. So helpful.
@Kenjiro5775
@Kenjiro5775 4 жыл бұрын
My biggest take away: I need to feather my cutting strokes better. Thank you, I am about to paint a very well lit bathroom and this one tip is really going to make a difference. ✌😁
@AK-jt7kh
@AK-jt7kh 3 жыл бұрын
This tips are a life saver. My business can’t open because the painters and carpenters can’t paint these custom cubbies. Tonight I do it myself 👍
@khasselmo
@khasselmo 3 жыл бұрын
"You gotta feather that edge." Insert heart-eyed smiley face here.
@Harris0n11
@Harris0n11 2 жыл бұрын
Hello! Thank you for all your instructional videos. After watching a few videos I realized I wasn’t using nearly enough mud to get the job done efficiently. You’ve saved me so much time thank you!
@craig7185
@craig7185 2 жыл бұрын
Great stuff, thank you. New homeowner here and I didn't learn this stuff growing up, so I'm relying on KZbin to learn. I appreciate you taking the time to film this!
@jeffreystorer4966
@jeffreystorer4966 Жыл бұрын
Tip cut in 1 wall then roll it in straight away ,helps stop picture framing and picks up any thick edges from brush, or cut in and have second helper rolling behind you ,use roller pole put v shaped two roller wide stripe on wall to get paint mostly off roller ,then spread it out floor to ceiling evenly ,then tip it off in one direction bringing your wet edge with you , space your self away from wall so when you get to ceiling it's hard to reach last two inches , stop you from hitting ceiling , above all be systematic get into a Grove that works for you , muscle memory will kick in and job will begin to flow nicely ,,
@nicksprung8873
@nicksprung8873 5 жыл бұрын
I always use old coffee containers for cutting, it’s very cheap because you’re throwing it away otherwise but it has a handle and a lid so you can store the paint when you’re done plus they for perfectly on a ladder
@peaches5712
@peaches5712 4 жыл бұрын
Oh my gosh......I learned so much in this short video then from any paint store! I literally had aha moments everytime you covered a tick! lol My sister and I are moving into a house built in 1925 so we have a lot of work to do, but you have helped with the painting! And p.s......you are pretty handsome too! 😉 Thank you!
@mcbeth2523
@mcbeth2523 2 ай бұрын
Truly a beginner trying not to have to sit through some other video on how to fix paint mistakes. This really helped 😄
@madisonp8745
@madisonp8745 3 жыл бұрын
Great tips. Especially about cleaning your brush out every hour or so. New idea to me I am definitely going to do.
@carolinefriedland7498
@carolinefriedland7498 2 жыл бұрын
I love your videos. I'm a DIYer--I've been painting for many years. I never knew you were supposed to wet the brush! How did I not know that? I just bought a new Purdy brush and am looking forward to see how it cuts when wetting it first. Keep the videos coming. Thanks.
@greghong5010
@greghong5010 Жыл бұрын
Personal preference: I usually carry 3 or 4 of the same brushes, and use each for about an hour before soaking them in an inch of water in a bucket. Rotate as needed. At the end of the day I rinse brushes with an outdoor garden hose, never in anyone’s sink.
@Sunstop
@Sunstop Жыл бұрын
I start my cleaning by wiping out most of the residual paint with old news papers or rags. Mine are also rinsed with a garden hose, but aren't you kind of screwed if working in an apartment like setting? Guess you could keep them wet til you get home, but what if you also live in an apartment like setting!😱 After the rinse, they get washed in the sink using a comb and shampoo and conditioner. Yup! Works great.
@greghong5010
@greghong5010 Жыл бұрын
@@Sunstop oh wow, I didn’t think about shampoo and conditioner! I use S-W SuperPaint or Duration, both rinse easily. The only thing is, the ferrules rust & stain the Wooster brush handle, but that’s minor. I don’t know a solution if you’re in an apartment too. Main thing is to avoid being accused by anyone of clogging their pipe with paint residue. Extreme bond primer is so thick I can pick out clumps of the rinsed out residue in the grass!
@1jfreak777
@1jfreak777 4 жыл бұрын
I really appreciate your videos covering a variety of projects including tool usage, products, tips, procedures, do"s and don't's, and tricks of the trades. So very informative. As a do it yourselfer; they are immensely valuable to me. Also the links you provide are helpful. I already used them to research items and make purchases.Thanks so much.
@jaya2476
@jaya2476 4 жыл бұрын
Very well stated!
@mattpitarra360
@mattpitarra360 4 жыл бұрын
All he is doing teaching you the wrong way to paint. Trust me he's an idiot.
@questioneverything3632
@questioneverything3632 3 жыл бұрын
I love you Canadian home improvement guys! In fact, I think you’re my favorite channel! I learn and laugh! 🤣
@thomasrowlands6564
@thomasrowlands6564 4 жыл бұрын
I am an inexperienced person painting a wall of a house I bought and the video has given more confidence of cutting in the edges of the wall to fame the area. Thank you! :-)
@davidcalcagni7366
@davidcalcagni7366 5 жыл бұрын
When you cut the top you actually want to load your brush with ample paint and cut an inch or so below the ceiling first. Leaving the paint on the wall. Now come back and cut the line and your brush will be fed by the well of paint you left and you can easily run a 6 foot line in one shot.
@scottm4042
@scottm4042 5 жыл бұрын
I do that as well. And when I wipe my brush the only part I wipe is the narrow edge near your thumb and forefinger, because I found that to be where the drips come from, and I have alot more paint to use on the wall. God bless in Jesus!
@markanthony3275
@markanthony3275 5 жыл бұрын
Exactly ! Get it up there and then move it where you want it...kinda like drywall mud.
@mark675
@mark675 5 жыл бұрын
@@scottm4042 does jesus help you paint? 🤣🤣
@scottm4042
@scottm4042 5 жыл бұрын
@@mark675 That's a good question. John 1:3 says that "All things were made by him; and without him was not any thing made that was made." KJV. So, if Jesus is also our God and Creator, than life itself came from Him, and everything seen and unseen. I would suggest Living Waters on youtube for further study, God bless.
@mark675
@mark675 5 жыл бұрын
@@scottm4042 oh shit i woke the religious nut cases..
@marcinkapinski1806
@marcinkapinski1806 2 жыл бұрын
I see lots of people paint corners and frames first. You can probably be successful doing so with white paint. What I’ve learned is to always paint in wet paint. Point is that if you using water based paint that dry quickly and do corners first you’ll get different color on edges and different in the middle. Slightly but still. So I would recommend painting everything as you go.
@davebeedon3424
@davebeedon3424 4 жыл бұрын
Good point about mashing the electrical cord. Doing so softens the wires in the cord, reducing kinks and allowing the electrons to flow more easily. (If the stool or ladder has padded feet, use a hammer instead.) A welcome side effect is to minimize voltage drop, at least until the wires short out and start a fire. But try to avoid fires, as they tend to mar a well-painted wall and annoy picky customers.
@SoCalRhetor
@SoCalRhetor 2 жыл бұрын
Fast makes smooth. Thanks for posting this, you're a good teacher.
@PP-gy8gg
@PP-gy8gg 2 жыл бұрын
Your drywall video's really helped me. Now I'm onto your painting.. you are a champion.. regards from Bendigo Australia
@robertgarner11
@robertgarner11 4 жыл бұрын
Thanks for these useful tips. While painting my annex I found myself saying 'feather my edge' over and over!
@durrahali301
@durrahali301 3 жыл бұрын
I learned something new today! Never knew about wetting the brush prior the job. Thanks so much!!🌸
@richstevenson1
@richstevenson1 4 жыл бұрын
"Be sure to do this in the homeowner's kitchen sink" Wait! What?! LOL that was so funny!
@DecoyJayc
@DecoyJayc 3 жыл бұрын
He's joking
@Chopp333r
@Chopp333r 3 жыл бұрын
Oh thanks we couldn’t tell...
@richstevenson1
@richstevenson1 3 жыл бұрын
@@Chopp333r 😬
@xtman693
@xtman693 3 жыл бұрын
Best videos for homeowners on KZbin. You do a great job.
@datguy9408
@datguy9408 4 жыл бұрын
I know you mainly for skate tutorials and got quality information for working with things around the house. Dude you’re amazing.
@vancouvercarpenter
@vancouvercarpenter 4 жыл бұрын
Happy to help!
@joelalexander4513
@joelalexander4513 2 жыл бұрын
I loved this video. One thing to note is that if you want the painting done lightning fast, there's a technique called "throw" where you take a bucket, angle it 45 degrees, wrap the pail handle to a left handed barbell grip, tied snug, and loop around in several circles whilst spin wheeling the paint all over the place. Then you simply take your shoulder pads and nestle up against the surface and smear it in. It's important to make grunting sounds whilst you do this.
@iam.3603
@iam.3603 2 жыл бұрын
😂😂😂😂
@mohitg1846
@mohitg1846 2 жыл бұрын
There's a much efficient way widely known as "Mr. Bean's method". Gently place the paint bucket in the centre of the room that needs paint. Open the lid. Place a firework inside. And light it up. Voila! Merry Christmas.
@zapyawhereithurts
@zapyawhereithurts Жыл бұрын
I had no idea there was so much to painting. I have a new respect for what you do. I can’t find anything that addresses mixing flat and gloss together. Maybe that’s a no no but I was going for something a little shinier than satin but not super shiny like gloss so I mixed ‘em together and painted my kitchen.🤷🏼‍♀️
@gavinjenkins899
@gavinjenkins899 Жыл бұрын
@@zapyawhereithurts I've tried that before and what usually seems to happen is that a 50/50 mix looks about 95% as glossy as the glossier paint you put in.
@Dan-ji4db
@Dan-ji4db 5 жыл бұрын
Painter here. Good tips except for wetting the brush. I'd much rather have a little crust (thatll come off with a wire brush) than a watery, leaky brush. I wont even use a brush that's still wet from the last cleaning. That wet brush is gonna start dripping watery paint down the handle and make a mess every time.
@vancouvercarpenter
@vancouvercarpenter 5 жыл бұрын
Good point! I forget about that sometimes.
@erinkennedy2417
@erinkennedy2417 5 жыл бұрын
I avoid a wet brush at all cost, not because of a mess but because I feel I don't have as good of control. The Bristles tend to clump together and it's just not what I'm use to... I know you said you'd dive into different brush stiffness. But I hope you give a Picasso brush a try, for cutting in walls I find it amazing!
@swill1020
@swill1020 5 жыл бұрын
Dan H . Me too. I don’t like having a brush that is holding retained water and drip everywhere when you turn it upside down.
@heathercouch4068
@heathercouch4068 5 жыл бұрын
Towel off brush to remove most, and use good quality paint and you shouldn’t have any problem with watery paint. Also tip on cleaning- I use “the Masters” brush cleaner (art supply type) this will remove even hardened paint from brushes.
@nickmegerte
@nickmegerte 5 жыл бұрын
Painter here aswell. It makes cleaning easier when you wet your brush. What he left out is you want to spin your brush so its not dripping wet but damp so paint isn't the first think to seep into the soul of the brush the water is.
@rogerdart2902
@rogerdart2902 4 жыл бұрын
CEO of feathering his edge
@renealbaladejo3698
@renealbaladejo3698 2 жыл бұрын
Awesome tutorial. Very valuable application. Every homeowner should watch this must see painting class!!! Thank you.
@BC026
@BC026 2 ай бұрын
What a funny and informative video. I’ve learned a lot especially “ feathering”. Thank you x
@corbinmclean9591
@corbinmclean9591 5 жыл бұрын
"Hey guys it's the Vancouver carpenter" "so carpenters are pretty dumb when it comes to painting" Lol love the honesty. Great videos keep them coming
@jennevaa
@jennevaa 4 жыл бұрын
I appreciate the tutorial and it was fun..I miss painting lately and going back to it so don't feel bad if we throw in some zingers ,not personal, just sharing with other painters..unless it at Dunn Edwards or Sherwin quickly, no one else understands. Hey, while I'm thinking of it. I'm in love with Rustoleum (hard to believe) APPLIANCE EPOXY. At my home, I've done cabinets -Home Depot, I order, comes in quarts for about $10-$15-sometimes a double pack for less,window hardware, even copper knobs (with the spray type at Walmart)...and... I actually did a shower wall for a friend..someone sprayed flat wall paint and peeling and I scraped it down, oil primed and let it cure a bit, then 2 top coats a week between coats and since it wasn't going to be used for shower spray, only bathtub-it looks great 3 years later. Don't know if it would split if direct spray. But I love that appliance epoxy. Used white gloss. Thanks for giving us a forum.
@recommit
@recommit 5 жыл бұрын
I frequently have trouble finding somewhere at a clients house to wash out a brush or rollers, & definitely not in the kitchen sink. I keep a roll of glad wrap in the car to wrap up the brushes & rollers, keeping them airtight until I get home & wash them there. They will keep for many hours when wrapped up in film.
@qzetu
@qzetu 5 жыл бұрын
I don't understand why people even bother to wash out rollers. Simply add the cost of rollers in your estimate and throw them away after using them. The only rollers I wash out our my 1 inch nap rollers that I use on brick wall. I do so because they are not used all the time and tend to cost more. If you need to wash out rollers you can do one of two things. (1) Wash your roller and brushes in a bucket. That will water down the paint allowing for you to pour the water and then washing it out with the hose. (You should dig a hole or part rocks.) (2) buy a small bucket with lid and put water in it. That will keep them wet until you get home or even to the next day.
@mcgraw8098
@mcgraw8098 5 жыл бұрын
@@qzetu you're obviously buying rubbish sleeves.
@qzetu
@qzetu 5 жыл бұрын
@@mcgraw8098 You're obviously a snob when it comes to them. A $20 roller does the same job a $10 roller does. I use all kinds of brands depending on the job. The reason I don't like reusing rollers is because paint does dry in them over time and it leaves a texture. When I roll flat walls and doors and trim I always use new rollers. The only time I wash out my rollers is if I am painting a large home with textured walls that will take me 2 or three days. I wash and reuse to bring down cost.
@mcgraw8098
@mcgraw8098 5 жыл бұрын
@@qzetu surely on a larger job you'd bag your wet rollers for the next day? ( no need to wash it out). Madness chucking rollers in the bin after every job, totally wasteful. Why not chuck all your brushes in the bin after every job?I
@qzetu
@qzetu 5 жыл бұрын
@@mcgraw8098 you don't know what you're talking about. You don't bag your rollers. After a fulls days work paint dries on the ends of rollers and by the next day the paint on them is thicker which causes inconsistencies. I always wash my brushes out and reuse them because (1) they are more expensive. (2) easy to clean. It is not a waste it is smart. I pay around $15 for three rollers. I pay $20 for my 20" rollers. I simply add that to my estimate. It makes the end if the day easier to clean up and go home.
@bryankautz826
@bryankautz826 3 жыл бұрын
One quick, simple little trick I've found helpful, if you are using the paint can and not the smaller handheld bucket, put an elastic band running vertically from the bottom and centered over the open top and wipe excess paint off your brush on the band instead off the can rim, that way the excess paint drips back into the middle of the can instead of clogging the rim for resealing or running down the outside and dripping on the floor. When done, just chuck out the elastic. Really convenient for quick touch ups when you don't need to break out the mini bucket & liner just to have to clean it out in 15mins or so.👍
@brandywineblue
@brandywineblue 3 жыл бұрын
What happens when the elastic breaks??? 😱 #splat!
@davidboertjes323
@davidboertjes323 4 жыл бұрын
I love some of the adjectives like "splarpy". I thought only maritimers and newfs used words like that! Thanks for the great videos!
@shelley9764
@shelley9764 Жыл бұрын
That was well worth watching ALL the way through. All very handy bits of info.
@Chopp333r
@Chopp333r 3 жыл бұрын
Angle the front of your brush down slightly when you cut in, the back end still keeps the line and you can see it easier, plus it widens your initial cut a bit before you feather it back out. I also like to wipe only one side of my brush, the side that is going against the surface not being painted, that way the side that is being painted has a little more paint to spread out in one run plus it coats it better thus increasing your chance of painting in one coat if you use good paint. ALSO most importantly, use GOOD paint and NOT the cheap stuff, you will always get better results
@IQBALHUSSAIN-xs8ws
@IQBALHUSSAIN-xs8ws 4 жыл бұрын
Thanks for the video. I have learned a lot of painting by experience. I use only rollers big and small ones depending on size of the areas. For edges with different colors i use painter's tape and then use thick coats on small roller's edges, the texture is super smooth but that's just my preference. For areas i cannot get rollers in, i use brushes.
@chopz5881
@chopz5881 4 жыл бұрын
Lol the ending cracked me up, having construction exp thats funny the whole leaving paint in the customers sink 🤣🤣 sarcasm at its finest
@williampalmer2999
@williampalmer2999 3 жыл бұрын
)
@charlotteruse158
@charlotteruse158 3 жыл бұрын
I think this is the most relaxing video I've watched. I know. I weird. Good points. People that haven't painted think its easy, and it's not. At all. Yes, the paint in the sink, splatters on the floor, blinds, stove, countertops, here there everywhere. Love it. The guy did a beautiful job of painting my cupboads though.
@chopz5881
@chopz5881 3 жыл бұрын
@@charlotteruse158 you're right, its not easy
@limbsflailing4479
@limbsflailing4479 4 жыл бұрын
I think this is the best KZbin video I've ever seen. Not kidding!
@sailorgirl2017
@sailorgirl2017 Жыл бұрын
Thank you! I've never wet my brush first but will from now on! Great tip.
@tjroicub6079
@tjroicub6079 Жыл бұрын
The last step I use when i clean a brush is to use a dab of hair conditioner/cream rinse or whatever you prefer to call it, work it into a damp brush then rinse. Results are a flexible, smooth brush, just like the hair on your head, if you have hair up there. 😊
@sicZ32
@sicZ32 4 жыл бұрын
Tom and Christina would love this "feathering" video.
@tamikajoseph6127
@tamikajoseph6127 4 жыл бұрын
I literally came back to the comments to see if i read that right
@tamikajoseph6127
@tamikajoseph6127 4 жыл бұрын
I literally came back here to see if i read that right
@gsf67
@gsf67 4 жыл бұрын
I was told to tap my paintbrush, that way a paint brush is loaded. Only occasionally will I wipe the sides of the brush if there was excess paint or a build up. I generally only load my brush about 20 - 30 percent, or 30mm.
@frankdatank2570
@frankdatank2570 4 жыл бұрын
You are correct. Dude paints like a carpenter :P But really, its a decent guide for a beginner. I was a professional painter for over 10 years. Here are the things he did that I learned differently: 1. Wet the brush: I never did this, it just makes your paint drip more causing a mess (dry brushes always). 2. Scrape the brush on the can: since day one I was taught to slap the brush inside the can. 3. Cut thick: I would cut thinner to prevent edging. 4. Wash the brush ever X hours: Never seen a painter do that. The brush is used until the project is done. If it builds up dried paint scrape it off with putty knife.
@ciaranbutler4857
@ciaranbutler4857 4 жыл бұрын
@@frankdatank2570 I never wet it either and tap it inside the bucket but I was made to wash all the tools after every job and using a wire brush to scrape the paint off
@frankthetank1369
@frankthetank1369 2 жыл бұрын
@@frankdatank2570 Yo we got the same nickname. I'm painting my sister-in-laws house in a couple days day don't want nothing professional. So I guess I'm gonna wing it. Yippee. Any pointers? Thanks.
@chaplainand1
@chaplainand1 3 жыл бұрын
Brush comb works. A small scrub brush is nice to keep the paint brush clean. I use a 2 1/2" tapered or trim brush for cutting in, especially around trim. Some, even high quality brushes, go limp when first washed. I like to switch out to keep the brush fresh. I notice you load the bush nearly full. I was instructed by an old hand to wet only the end, like less than the first inch, when cutting in. I really appreciate seeing how you use the brush. Take care.
@abauto5408
@abauto5408 9 ай бұрын
This is great advice. I use the claim shell technique but I am a diyer. Now I I am going to try this. Keep up the great work and thanks for teaching us.
@ericzipf1332
@ericzipf1332 5 жыл бұрын
Ahhh, the sarcasm! I love it!
@gregwertheim3970
@gregwertheim3970 3 жыл бұрын
To keep my brushes from drying too fast I wet them first and add a couple of drops of Floetrol FLOOD to the wet bristles near the ferrule. It makes clean up so much easier especially in dry conditions when your brush starts to dry immediately.
@kirbsmeister2
@kirbsmeister2 3 жыл бұрын
It takes me a whole day to cut a room, seeing a pro do it in minutes hurts badly.
@smurfmonster
@smurfmonster 3 жыл бұрын
Me too!!!
@seroyhomeservices5212
@seroyhomeservices5212 3 жыл бұрын
This is why you should always hire the pros. It'll end up costing you way less in time saved. Pro painters can easily paint 5 times faster than the average person and the end result will be of much higher quality. Plus, most painters are only paid about $20/hr and can purchase your paints at a discount so it truthfully never makes sense to paint a space your self.
@MRSHREK-wk5oc
@MRSHREK-wk5oc 3 жыл бұрын
@@seroyhomeservices5212 people do whatever they want if you are lazy follow his advice you can easily paint your whole house in 1 month painting on the weekends all you need is paint and brushes and rollers why waste on paying someone to do something u can easily get done i of course a contractor would advise this 🤦‍♂️👌
@helenarichard
@helenarichard 3 жыл бұрын
Just frame it all with masing tape
@bettemarie622
@bettemarie622 3 жыл бұрын
long arms help, I’m up and down a ladder all day moving it along the wall
@delb7386
@delb7386 2 жыл бұрын
This video is a lifesaver! I am going back to my local Do It Yourself store (again -3rd time in the last 2 weeks 😄) to buy the correct brush - the Cutting in /Angled brush ! I saw this brush but had no idea what it was for 🤔 I have been struggling to paint a straight line between my ceiling and walls and creating a mess on both areas. I was going to try using a small Art paint brush! But now, I will your try your tips - thank you for sharing - really appreciate this!
@mikegrier2829
@mikegrier2829 3 жыл бұрын
Enjoyed the video style and the tips were very useful. One big thing I didn’t have any idea about: wet the brush before starting. Washing the brush about every hour…brilliant.
@lemans3507
@lemans3507 5 жыл бұрын
The hardest part of painting is the prep.work.
@jimcowden1063
@jimcowden1063 5 жыл бұрын
Most definitely.. also great prep makes the job crisp
@donniedoesit4958
@donniedoesit4958 4 жыл бұрын
,if I hire a helper, all of my questions refer to prep.
@ThisAdventureFamily
@ThisAdventureFamily 4 жыл бұрын
lemans 350 HOW TO PAINT YOUR RV m.kzbin.info/www/bejne/gYDZoJKKn5xnjLM
@howardwayne3974
@howardwayne3974 4 жыл бұрын
You got that right brother ! And I've got a passed off wife to prove it (and spellcheck ).
@redsquirrelftw
@redsquirrelftw 4 жыл бұрын
I sometimes get lazy and don't prep. "I'll just be careful" I have a paint stain on my shower curtain because of that. :P Quick bathroom ceiling job didn't really want to have to cover or move anything but I should have.
@marval550
@marval550 4 жыл бұрын
Calmly explained and plus that you’re handsome. Appreciate the great tips!
@mikeparks4488
@mikeparks4488 3 жыл бұрын
I consider myself a decent painter and can cut pretty fast, but always hated the dried paint buildup on my brush, I'll have to try the wet brush start. One thing that I hate when I look at a wall are paint gaps at the top of the wall. Cutting is rarely ever going to be perfect so I tend to favor making an occasional overlap on the ceiling rather than having a gap on the top of the wall. The reason is, that gaps on the wall can be see from any place in the room whereas overlaps on the ceiling are only noticeable when you stand right next to the wall and look straight up.
@TomRubicon5949
@TomRubicon5949 Жыл бұрын
that's a pretty great tip! thanks for sharing Mike
@ichigo-1e
@ichigo-1e 4 жыл бұрын
Learning something new everyday 🤓 went to my room to check my wall that I painted and saw the hard edge. Next time I renovate my room I know what to do
@dizastro5437
@dizastro5437 2 жыл бұрын
I agree with using the angle on the brush. Cut the fine line with the tip, then just whatever. Always keep the fine line longer than your fill/spread strokes. Works for me, and I can move pretty fast.
@therootandvein
@therootandvein 4 жыл бұрын
Another great tip... Something I learned from shooting a gun! Exhale when cutting in or running a bead of paint down a straight line. When you exhale, it steadies your body.
@Raysnature
@Raysnature 5 жыл бұрын
My tip; use as big a brush as you can. So often I see DIYers using tiny brushes to try and cut in. Use a 4" if you can. Holds more paint, allows for that fast line.
@chrisfreestone4136
@chrisfreestone4136 5 жыл бұрын
That's one of the reasons I learned to cut with both hands. Some guys I worked for insisted on the bigger brushes and your arms are done by lunch time. You will get used to it but I'm not as young anymore so I'll stick to the 2 and a half.
@Raysnature
@Raysnature 5 жыл бұрын
@@chrisfreestone4136 Same, I can actually cut better with my off hand now.
@jennevaa
@jennevaa 4 жыл бұрын
that's for you guys...smiles.. I want a finer detail for smaller hands.
@jennevaa
@jennevaa 4 жыл бұрын
@@chrisfreestone4136 ... Oh you are so right. I was so proud of myself when I learned to cut with both hands..and when I stopped arm shaking from painting over my head for hours. Small victories.
@budte
@budte 4 жыл бұрын
In forty years as a qualified house painter I have never seen a trained painter use more than a 2inch (maybe two and a half) brush, except in industrial painting - that is because they want full control over the line they are cutting in. - also taught to cut in with both hands so you don't have to keep moving your ladder.
@manichairdo6346
@manichairdo6346 5 жыл бұрын
I always got a brilliant professional. My dad. Missing him. But great video.
@richardkawucha1232
@richardkawucha1232 Жыл бұрын
When painting I prefer a 1-1/2" to 2" sash brush. A sash brush permits me better control. While you use/prefer a thicker brush, I use prefer a thinner brush for better flexibility. You also load your brush much more than I would. I would usually dip no more than a 1/2" in the paint. If I was a production painter I'd do like you do. Rather than a can of paint, I prefer a tray, that way once I've cut in I can immediately start rolling. Ceilings first, then walls and finally trim. I clean my brushes and use a stiff nylon scrub brush rather than a comb. I use a ceiling white or a paint with just a touch of lamp black. This give the white paint a very, very faint bluish color which looks brighter and covers well. I spent 7 years working at a paint company. I worked in their latex plant where my job was to tint the paints to whichever color you wanted. This was all done by eye, long before computers and light spectrums were used.
@cmbooks2000
@cmbooks2000 Жыл бұрын
Cute. Thanks for a great video and for leaving that paint in my sink
@germanxmascookie
@germanxmascookie 4 жыл бұрын
First off, yeay for this "too obvious to think to ask" video, and second, I could listen to this dude talk all day.
@TMendez528
@TMendez528 4 жыл бұрын
When cutting you are going form one extreme to the other Wide part of the brush to skinny part. Neither is correct. Instead try rotating the brush to an angle like you are on your after stoke. press slightly on the brush and watch the wet edge so as to get the paint ot flow where you want. THIS is where paying the extra money for that better brush really pays off. Run the brush the length using looong strokes. the longer the stroke the more straight your like is likely to be. short strokes will make it uneven. Then back stroke along the outer edge of your original cut (away from the part you are trying to avoid painting in this case the ceiling then work forward again. This will help you both spread the paint over a longer area and the back stroke will give you a wider and smoother cut making it easier to roll. If your first cut isnt absolutely perfect. dont make yourself nuts over it. the is where the second coat comes in handy too as you dont have to be quite as perfect with your cut. But you will find it easier to straighten out that line
@jennevaa
@jennevaa 4 жыл бұрын
another thing I do sometimes is load the brush and pool it on the wall and draw from it, if you are painting fast, you can do it.
@miked8558
@miked8558 4 жыл бұрын
That a good tecneic for lager room walls.
@andpop2157
@andpop2157 2 жыл бұрын
The best video about painting for beginers.
@zacharymaneja1207
@zacharymaneja1207 Жыл бұрын
I like the disclaimer you make about commission in description. Very honest
How To Paint A Room | DIY For Beginners
25:07
Home RenoVision DIY
Рет қаралды 7 МЛН
How to Paint A Room Fast Like A Pro (Tips for Beginners)
13:09
SgtDonovan
Рет қаралды 2 МЛН
Ozoda - Alamlar (Official Video 2023)
6:22
Ozoda Official
Рет қаралды 10 МЛН
Trim Caulking Secrets That Will Change The Way You Caulk!
8:38
The Funny Carpenter
Рет қаралды 2,4 МЛН
How to Paint Straight Lines. Where to Use Tape
8:28
Super Vassar Brothers
Рет қаралды 46 М.
DIY Painting Tricks to Get Pro Level Results!
27:03
Stud Pack
Рет қаралды 3,9 МЛН
How to fix a crack in a wall or ceiling - DIY
13:01
Billshowto
Рет қаралды 8 МЛН
How NOT to Roll Paint on a Wall - Spencer Colgan
13:35
Spencer Colgan Wallpaper & Painting
Рет қаралды 117 М.
Top 3 Beginner Mistakes on Inside Corners!!
5:46
Vancouver Carpenter
Рет қаралды 2,1 МЛН
7 Painting Tricks That Will Make You Level 100 Master
3:10
The Maker
Рет қаралды 27 МЛН
How To Paint Baseboards- The Easiest Way to Professional Results!!!
6:22
The Funny Carpenter
Рет қаралды 2,3 МЛН
How to Paint a Room for Beginners
20:38
MrsAshleyFrench
Рет қаралды 206 М.
The Secret to Getting a Perfect Paint Finish with no Brush Marks
8:27
seejanedrill
Рет қаралды 2,8 МЛН