Paint Spraying Mini Cooper Bonnet

Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them
In this video we have a Mini Cooper S in for a small dent repair and scratch, i have a go at doing some small dent repairs using a paint less dent repair method, its not something I'm very good at or have much experience in but i like to give it a go on panels I'm going to be painting
00:00 Intro
03:30 Paint Less Dent Repair
05:49 Stripping
07:07 Paint preparation
08:49 Car body filler application
13:06 Masking
11:39 Spraying wet on wet primer
19:28 Spraying Water Base Coat
23:28 Spraying 2k High Solid Clear Coat
27:23 Final results
28:03 Outro
Filler Used
Evercoat Rage Ultra
The paint used on this vehicle is
Mipa WBS 1k Water based primer
Mipa WBC Waterbase Base Coat
Mipa CX2 Clear coat
Sprayguns used
High Build Primer Satajet 100 B 1.8 Set up
Base Coat Satajet X5500 HVLP 1.3 i Set up
Clear Coat Satajet X5500 RP 1.3 CC Set up
Paint Pots
Sata RPS
Hope you enjoy
If you enjoyed this video
Please Like, Share and Subscribe
Many Thanks for watching
#dentrepair #paintsprayer #carbodyrepair #paintspraygun #satajet #carspray #autobodywork #car #bodyfiller #stonechipprotection
#panelbeating #car #carbodyshop #bmw #bmw2series #bmwm #minivlog #mini #miniconvertible
‪@SpraygunsDirect‬
‪@BMW‬
‪@evercoatbodyshop1382‬
‪@PaintServicesUK‬
‪@paintservices8647‬
‪@MINI‬

[@richweston6202]

Colour looks spot on especially as it's edge to edge. The humble paint wizard! 😊

[@TheHumblePaintSprayer333]

👍 was close enough 👍

[@vincetaylor944]

Hello from Egypt Jason and Reece, I still managed to watch from the beach 😂 Enjoyed the video, new products and a PDR ! Great results as always, thanks for sharing mate. Cheers Vince.

[@TheHumblePaintSprayer333]

Legend!

[@grantssmartrepairs]

babiliss hair dryer for the win 🤣🤣🤣

[@TheHumblePaintSprayer333]

Can’t beat a high quality hair dryer 😂👍

[@SuperMinimadness]

I will stick to a cheapie out of Asda that air powered one is to expensive for me!

[@grantssmartrepairs]

great job mate came out well 👌👌

[@TheHumblePaintSprayer333]

Cheers mate 👍👍👍

[@Badger66]

Brilliant as always..... You're a wizard Jason!

[@TheHumblePaintSprayer333]

Thank you 🙏

[@thetriggerman954]

I never have any luck with the PDR i have a few kits but i suck. Awesome results there my man color looks good too. Love the music at the end 🎧🎵🎶 splendid video keep them coming. 👊🏼

[@TheHumblePaintSprayer333]

Its harder than you think isn't it, id love to be able to do it well i find it interesting and a very handy skill to have in our trade. Must keep practicing Thank you mate, really appreciate you kind words and support Have a blessed week Man 🙏🙏🙏

[@petergrinnell2500]

Al and fudge from 6d diesel's gave you a good shout out on hes channel to check you out so I've subscribed as i could do with some tips on painting vehicles as im great with i do welding and fabrication for 25 years and do vehicles in my spare time and be getting a project of my own this year depending on wat i can afford as i like retro fords and vauxhalls but cars go for silly money but i can tell all ready your better then you think mate 👍

[@billsheehy1660]

Nice job

[@TheHumblePaintSprayer333]

Thank you! Cheers!

[@1978JonBullock]

Very nice job. Hard colour to match but I'd say you got it bob on .

[@TheHumblePaintSprayer333]

Thank you! Cheers!

[@skodakatie7341]

Another excellent repair Jason. I did like your new dryer, it could give my GHD hair dryer a run for its money, with all of those settings lol. Great content, I enjoyed watching ❤.

[@TheHumblePaintSprayer333]

😂 brilliant 🤩

[@Dan-zm4vb]

Great job buddy!👍

[@TheHumblePaintSprayer333]

Thanks 👍

[@jasonabbbott40]

Nice job 😊👍

[@TheHumblePaintSprayer333]

Thanks 👍

[@bigsquatchsasfoot1964]

Looks perfect dude 👌 I’ve never painted a car before so I’m sucking up all the info I can been learning a lot although I know the practical will be a learning curve to ! I’m hoping to paint my streetka soon and hopefully take it to ford fest this year fingers crossed 🤞 nice job my good man 👍

[@TheHumblePaintSprayer333]

Thanks, hope my videos can help and always feel free to ask, good luck with it

[@jamesr8897]

👌🏻

[@barryjohnson127]

Hello matey when i was rectify minis, paint work in the factory 🏭 we only were only allowed to paint each panel that was not up to spec.and blends were a no no! Thats why there's slight variations on shade between the panels most the bonnets were repaint by the robotson the main line other panels painted by hand. off main line repairs .was that pure silver with a jet black roof, could be wrong .infrared heat lamps dry the water base off atreat in factory. Get a small one better than a blowers.both even better.

[@TheHumblePaintSprayer333]

Hello mate, can’t have cables and electric in the booth while I’m spraying, the blowers work fine when I increase the air temperature Thanks for sharing this 👍

[@justice5699]

Great job Jason. On your clear gun did you change from I nozzle to the 0 nozzle? What am I doing here and not working you may ask hahaha. It's 108 degrees and everything I'm spraying is basically drying in mid air hahaha. Just letting the sun go down and I will probably have to start working nights when temperature is much cooler. I don't want to roast myself.

[@TheHumblePaintSprayer333]

Thanks 🙏 I have a 1.2 O and the CC which is more of a i pattern for clear Cor where are you that’s hot 🥵 it’s a nightmare I bet

[@justice5699]

@@TheHumblePaintSprayer333 Yes it's a nightmare. I'm located in deep South Texas. Couple of miles off the Gulf of Mexico which makes it extremely humid. I've noticed on the streets that lots of brand new cars with the clear wearing out. Had never seen that before on such new vehicles. Took a small break and better get back to work. Have a great weekend.

[@jasonabbbott40]

My wife thinks I am bloody mad watching paint dry 😂😂😂😂

[@TheHumblePaintSprayer333]

😂😂😂👍 im watching it everyday

[@davecooke914]

Great job Jason keep up great work you do on your channel 👍👍

[@TheHumblePaintSprayer333]

Nice one 👍

[@richardthepainter]

I do the same thing 😂 with the pdr it does interest me no end but I only do it on panel's i know iam painting same as you safe then just incase 😂 nice job as always

[@richardthepainter]

That dent remover guy Martin he's very good deffo worth a watch

[@TheHumblePaintSprayer333]

Better to be safe doing it on panels were painting Thanks Matey 👍

[@TheHumblePaintSprayer333]

@@richardthepainter I will check him out cheers 👍

[@jaybee8128]

Think I would of been on the filler and skipped the glue on that one

[@TheHumblePaintSprayer333]

Yeah I know, like I said I like to give it a little practice doesn’t matter if I mess it up when I’m gonna paint it

[@johnnyh2671]

Another great job jay, what tape do you use

[@TheHumblePaintSprayer333]

Cheers mate 👍 it’s Q1 Tape

[@ANDY-we7mr]

GOOD VIDEO JAY AND REECE THANKS FOR SHARING THAT INFORMATION JAY WHATS THE BEST FULID TIP FOR THAT MIPA F37 WET ON WET DARK GREY PRIMER ITS 5 .1 MIX JAY I HAVE A DEVIBLISS FLG5 WITH 1.8MM IS THAT OK OR A 1.4

[@TheHumblePaintSprayer333]

Thanks Andy, definitely a 1.4 for wet on wet

[@ANDY-we7mr]

​@@TheHumblePaintSprayer333 is that what you use I havd been using jay devibliss flg5 finsh line 1.8

[@user-qu1im6io1w]

I’ve have a healey 3000 in solid green I had a ladder fall and hit the front wing it’s dented and has a small split underneath where it bolts on can you alloy weld and repair what lead time are you talking

[@TheHumblePaintSprayer333]

Sorry I don’t really do welding