Pairing with display G2B

Shows the pairing procedure between PCU (transmitter) and CU (receiver) for a Scanreco RC400 G2B/G3 radio remote control.
During the "pairing procedure" the PCU and CU learn the code of the other part. Only a PCU paired with the CU can work via radio.
More info on our website at: www.fabercom.it/en/radio-cabl...
Subscribe to our channel: / @fabercomsrl

[@MohamedGMSesay-tp7dq]

How to turn off the alarm showing green and red light when working with Crean

[@FABERCOMsrl]

Blinking with alternate colors (green and red) normally indicate that your PCU is in LOCK mode. This applies to G1 (old generation) standard PCUs only. In order to receive more information, please feel free to contact our closest dealer: scanreco.com/distributors/ Many thanks!

[@Tugmaster]

thxs very much

[@omarramadhan7463]

nice

[@zizitripo777]

do you have the procedure for models without display?

[@FABERCOMsrl]

Hi, the procedure for models without display is the same. The only difference is that there isn't the phase where the graphic project is uploaded. Therefore, the steps to be followed are exactly the same also for G2B radio remote controls without display.

[@kamranhossain7992]

sir, can you give me schematic diagram this model

[@FABERCOMsrl]

Hello Kamran, in order to get the right diagram, please kindly contact our support dept. at ic(at)fabercom.it, providing the type and serial number of your unit. In this way, we will manage to identify your version and provide the right technical sheet. Many thanks!