Palm chisels | Narex palm carving chisel set review

[@KingBespokeCreations]

🌟✨ Get your copy of my new book “Be a Self Taught Woodworker” on Amazon now! 📖✨🌟

[@simonmountford4291]

By C Hatton ? 🤓 ok purchased just…👍

[@KingBespokeCreations]

@@simonmountford4291 awesome! I hope you enjoy it 👍

[@ArturBrzozowski444]

It takes some time and experience to realise that almost every tool needs proper setup after buying. Now I realized I probably have really decent chisels but I had no idea how to take care of them. Thank you for this enlightenment!

[@KingBespokeCreations]

I know what you mean. The first quality chisels I bought were pretty sharp and I thought that was good enough. I was terrified to try and sharpen them in case I ruined them!

[@martinlouden9005]

I received a set of palm chisels for a birthday present more than 15 years ago. To my eternal shame I haven't yet even taken them out of their box. Watching your videos always puts me in mind of these chisels, so hopefully I'll soon start to utilise them. Cheers Chris!

[@KingBespokeCreations]

Oh I hope you do!

[@martinlouden9005]

@@keshermedia no. It just doesn't occur to me to use them until AFTER I've finished with the rasps, files, knives and scrapers. I don't do much in the way of intricacy so they get overlooked!

[@indianatone218]

Just ordered some cant wait for them woohooo

[@KingBespokeCreations]

👍

[@fdort3971]

I must say I'm relieved by watching this! It's been many years since I last used chisels...I thought I had lost my touch due to arthritis and carpal tunnel...but after watching this and your other videos it's the wood and chisels! I seriously need to practice my sharpening skills. Clearly I've forgotten more than I remember. @KingBespokenCreations I forgot to ask you before...is it the smooth leather side or the rougher suede side of leather we use for stropping please? Thanks again for lessons

[@KingBespokeCreations]

Either will work but I tend to head to the suede side

[@fdort3971]

@@KingBespokeCreations thanks for all your responses!

[@mark64tanner]

Nice set of tools there Chris. Take care mate 👍✌😎

[@KingBespokeCreations]

Can’t wait to use them!

[@joshuaglaude1549]

Those chisels look like they will suit your needs quite well. Most higher end brands, are going to grind it close, and leave final honing up to you. But the quality of the grinding and the steel used should be close enough to at least get you started if you don't have a way to hone the edges. I like your sharpening and honing set up there.

[@KingBespokeCreations]

Thanks. It’s a great set up, quick and simple. Cheap too!

[@timblackwood1531]

Nice video and clear instructions. As a newbee to carving I'll get this set. How much are they? 👍👍🤔

[@KingBespokeCreations]

I believe they were around £40 when I purchased them.

[@ATinyPlace]

I'm about to order a 20mm bent gouge from the same company. How do you find the quality of the product for carving kuksas and other bowls by hand? I'm afraid of breaking the product. I had cheaper Beavercraft gouges, but they broke at the tips.

[@KingBespokeCreations]

I’ve not carved a bowl personally, but I have done a lot of picture carving with these. I must say they have been spot on. Never chipped an edge 👍

[@simonmountford4291]

How did you polish the V gouge ? I tried but struggled to see what I was doing…however as you said not to bad out of the box.

[@KingBespokeCreations]

For the outside of the V I sharpen like two flat blades and round over the point at the bottom. On the inside, a neat trick is to use a polishing wheel on a Dremel!

[@simonmountford4291]

@@KingBespokeCreations you’re costing me a fortune 😡 I’ve already bought the Dremel…and the plunge router…and the Versatip…after recently watching your videos! Now I’ve bought your book ! However I borrowed this exact set from a friend to carve EVA into a box lid, I filled it with resin and it turned out fantastic. My very first letter carving and resin project…however I struggled to sharpen that b gouge which is doubt the most useful from the set. 🤓

[@KingBespokeCreations]

@@simonmountford4291 😂 well done! There’s always more tools! Thanks for the support 👍

[@simonmountford4291]

@@KingBespokeCreations started 9 months ago now totally addicted and need help 🤣 Sunday night Amazon sessions have got to stop 🛑

[@simonmountford4291]

BTW I got that versatip two days ago and it’s brilliant…I have garage workshop without power and to be able to try pyrography without smoking my flat out is ace…totally recommend it.

[@cjl.6394]

Hello there! I know this video is over a year old, but I'm still hoping you'll see my comment and reply. 😀 I starting to do some relief carving and had watched quite a few videos on tool sharpening. No one has your setup so I was wondering what it is...a slab of granite/marble with some diamond strips\pads glued on or what - it's pretty awesome. Tell me please!

[@KingBespokeCreations]

Here’s a few videos to show 👍 kzbin.info/www/bejne/i365kHuAqd2Kotk

[@KingBespokeCreations]

kzbin.info/www/bejne/q6etnWStaJiXr5Y

[@KingBespokeCreations]

kzbin.info/www/bejne/injZmKmgms2nq9E

[@dcarbs2979]

Is it just coincidence, that they are Czech made, one of the best-known places in the world for puppet making? Hand-carved marionnettes.

[@KingBespokeCreations]

They do have a talent for carving!

[@cjl.6394]

How cool! I did not know this about them...awesome!

[@ChrisFranklyn]

You certainly wouldn't want a round chisel rolling off and landing on your foot

[@KingBespokeCreations]

I know! It would take ages to sharpen again!

[@cjl.6394]

@@KingBespokeCreations ... 🤣 HAHAHAHAHA!