Palmetto State Armory Sabre. Is it any good??

[@matt-bb2kv]

I use to laugh at other soldiers for having an A2 buttstock M16 but now that I'm older i pick it over a anything else, and you don't cry everytime it pulls a hair outta your face

[@CheJoffre]

LOL, definitely friendlier to the beard.

[@KTheStruggler]

I loved the A2 stock. Carried an M16A4 and an M4A1 and I like the longer length of pull and I always just maxed out the adjustable anyway. I never had any issues with it being a fixed stock while flakked up like some people say. I think it comes down to what you shoot the most, I feel like with a lot of stuff trigger time is the deciding factor.

[@charlesludwig9173]

Specs say A1 stock not A2? Is the handguard free float?

[@Regular_1094]

I hated that problem when the hole on top of the carbine buttstock would pull out my beard hairs. I just sanded the edges out of the hole so they won't get caught up. Haven't had a hair pulled since.

[@Specter_ZO6]

I like the magpul full stock. Great for taller people

[@heathpalmer1065]

The gun lock toss haha. Happy I’m not the only one who does it haha

[@HawaiiFoodAndFun]

They went the Hyundai/Kia route. Produce a ton of affordable items (that work) for the masses, then up their quality/looks and swing for the big boys.

[@JEassassin61]

Nothing wrong with that. We all love cheap reliable guns😁

[@JEassassin61]

Nothing wrong with that. We all love cheap reliable guns😁

[@JEassassin61]

Nothing wrong with that. We all love cheap reliable guns😁

[@masterxiong7368]

That's most companies for ya. Ford did the same thing. When starting up, it's just basic practice to mass produce and build quality from there. Honda and Toyota early cars were cheap ugly junk that over time hase build a reputable company. PSA is doing it right by producing affordable tools and parts. Selling by the mass and upgrading their line over time. Good on them and good for the consumer

[@jruba]

Are you going to be posting the same on every Sabre video ?

[@waynecribbs786]

Kinda liking that thing. Impressed with what PSA is doing these days. I'm liking the fixed stock there. Just MIGHT have to look closer at those. Good vid Brother. Thanks much

[@heavenbound9144]

Definitely a Keeper.. thanks for the Video Bro. Shout Out from Southern Colorado.. 2A is Here To Stay..

[@roundone7954]

I'm glad I found your video! I was on the fence about picking one of these up but I think you just sold me on the idea.

[@TheBeardedWretch]

Thanks! so far its an awesome gun and don't regret it at all!

[@MrBill-ee4mr]

Just ordered a complete upper like you have. However I'm building my own lower since I already have an extra one. Putting a vietnam era stock and grip on it.

[@nils704]

Looks very nice the way it is(my opinion). PSA is killing it.

[@GodGunsGills]

Yes they are

[@bananawatch8158]

The bcg in that is awesome. Check out school of the American rifle review of that bcg

[@GodGunsGills]

I love the quad rail and front sight! Beautiful rifle!

[@battletank21]

The Muzzle device is for KEYMO mounts by dead air. good stuff.

[@jamesscott5168]

Does it only fit their cans?

[@battletank21]

@James Scott Yes, it is their proprietary mount. but they sell a 1.375x24 adapter DA428 for other cans.

[@CHIRAQDEMON123]

Thank you sir !! I been waiting for a review on this model of PSA new Sabre line 🫡 hope they make in a 20in barrel

[@tacticaltray4907]

Nice! Thanks for sharing I'm loving what PSA is doing! 🔥💯

[@TheBeardedWretch]

They have really stepped it up the past few years. Thanks!!

[@tacticaltray4907]

@@TheBeardedWretch yeah I know and it keeps getting better, there are so many guns I want from PSA.

[@dancain7565]

Great review brother. You are one of my favorite Guntubers. Keep up the terrific content!

[@TheBeardedWretch]

Thank you!! Im still learning and going to continue to make my videos better and not 24 minuets of me rambling haha. I really appreciate it!!

[@menandroplan1554]

Just a guess but i think that muzzle device may fit DeadAir cans. The grooves look similar to how the DA md slot look

[@bane6486]

Indeed it can

[@darrensmith6682]

Sweet video I’ve been looking for a good review on these PS Sabres.

[@mrshort2379]

great content awesome review: to tell you the truth I think the PSA Sabre is the only AR-15 that I have seen that comes with it's own magazine. even though it is a STANAG mag, but made for the Sabre. personally I cannot wait till they release the STG-44 I am praying that the pricing is more like the Sabre pricing or lower would be even better

[@dutch0770]

It's over 2200. Haven't you heard? They OG price was 1800 and that was 8 years ago

[@TheBeardedWretch]

I plan on getting one of the STGs when it comes out. I have a couple WW2 guns and WW2 repop guns that I will be reviewing this year.

[@startduckin]

Great review. Was waiting for reviews. Now waiting for the sabre to get back in stock. Subbed

[@rockerdude8000]

They are in stock right now

[@startduckin]

@@rockerdude8000 I need the 13.7 billet.

[@boopy123]

@@startduckin it might be cheaper to buy a lower and upper separately. IF THEY still have them in stock. At least it is with at least one option they have that I was thinking about getting. It's about $40 compared to buying it completed.

[@TheBeardedWretch]

Awesome, thank you!

[@The_Disgruntled_Operator]

@The Bearded Wretch I bought the same 13.7 FSP upper from PSA and they neglected to put in the 4 screws on the side of the pic rail. When i contacted them about it they basically told me to eat it. If you know the size of those 4 screws so I can install them myself your info would be greatly appreciated.

[@gatormcklusky5850]

i just picked this up in the 13.7 .308 version minus the front sight post (wish it had it looks badazz) that said i picked up a set of Danial Defense rail covers, they look pretty sharp

[@julianbanning2308]

Picking mine up tomorrow from gun jail, ended up getting the 16" FN barrel with the mlok rail. Can't wait to see how it runs. Love the review.

[@TheBeardedWretch]

Thanks. Im looking at that as a second one.

[@dustinwatkins-vj1sx]

Why is it in hun jail with a 16in barrel?

[@CarlPapa88]

​@@dustinwatkins-vj1sxCommie states around the country.

[@CarlPapa88]

How'd it do for ya?

[@bblwarrantydepartment981]

I own a few pistols and a 940 pro tactical. Looking into building my first ar. Looks like I’m going Sabre upper

[@MrBossuporbowout]

Eventually in every industry the bottom catches up to the top tier until they up the ante again and even though it's not completely the same as the top tier it's good enough. Thanks for the video sir very nice

[@TheBeardedWretch]

Thanks! I agree. This is a $1000 rifle it’s not a POF or Daniel Defense by any means but if you can’t afford a $2300 rifle and still want a quality gun with great features this is definitely it in my opinion.

[@GODourFATHER]

a colt ar15a4 is $950 an FN ar15a4 is 1200 - seriously, i worked at PSA, if you saw the people that have no idea what a gun is let alone how to put one together-then PSA is for you. the people on the CNC line had never done CNC before and they pay $14 an hour....high turn over rate and QC is an old lady sitting in a chair that doesnt even know what to look for that had an hour of training.and the test shot fired in each rifle assembled is one round without a magazine in the weapon. they have 2 people that test fire on day shift with hundreds of weapons to run a test fire through in a 8 hour shift-test fire is only done on day shift@@TheBeardedWretch

[@edward_the_bruce]

You should make a 1 year review/update. :)

[@TheBeardedWretch]

I will 100% do that.

[@joshuar4470]

Liking the looks of this PSA Sabre. Might also look good with more green accessories to break up the black profile or a possible cami paint job.

[@TheBeardedWretch]

Paint job is in it’s future for sure!

[@pwnedbyGir]

They have a OD green variant

[@americankulak4596]

Beautiful rifle. Do you know the total weight with optic, sights , vfg?

[@overlordRX]

Really want to see if the billet version has any weight saving properties that are significant

[@edward_the_bruce]

I thought billet was heavier due to it being a type milling.

[@TCraig00]

Significant? No. Unless a company goes all out on lightening a rifle its not gonna be 'significant' weight difference from many other ARs.

[@ireilly2000]

bcg is made by microbest, same manufacturer as solgw. it should perform well.

[@TonyBShooting]

I’m really considering getting this exact rifle as my first rifle

[@TheBeardedWretch]

I would highly recommend it! Update video coming soon once I hit 2k rounds.

[@ryanpatton5937]

Im going to try and get my hands on one of them freedom sticks just like you have sir awsome review

[@TheBeardedWretch]

Thank you!

[@JN-bg9nj]

I own two psa setups. 16in ar15 and 20inch ar10. Both have exceeded my expectations. Have had zero issues with any of them. All very well made. I will be getting a Sabre in 223 Wylde very soon. Within the year. Not in a rush as of now. Really like that quad rail. But likely stick with mlok

[@bigbearrunfast]

I’m pretty sure psa is using A1 stocks, they’ve been selling them separately and with build kits from H&R as well

[@TheBeardedWretch]

You are correct I misspoke. They are A1s.

[@georgepeak861]

Beautiful gun but I always wondered why people wanted the FSB. What are the pro’s? (I’m a handgun owner but lookin into ar’s for the first time).

[@CarlPapa88]

Near bomb proof fitting gas block + sights that are always on. I've considered getting an upper w/ a FSB & hacking the sight off just for the pinned gas block.

[@hamiltonbrown9591]

I like it. I can’t go with the stock. I need adjustable. I’m on the smaller side.

[@TheBeardedWretch]

I was going to get the adjustable stock but I just like the A1 stocks.

[@adamadams6740]

Was trying to decide between this one and the one that comes with the detachable carry Handel,aww I see you were supposed to get the handle.

[@shmoopsIII]

The fathers of freedom bcg is made by microbest I believe (same supplier for bcm bcg). They are absolutely good to go. Have seen a few reviews of them from smiths checking all the specs thoroughly. They are phenomenal and for the money almost definitely the best bang for your buck for a bcg. The sabre line must be doing well because I can't find that stand alone bcg for my build and I'm pissed. 🤣

[@CarlPapa88]

Can still pick up the upper. Get the FOF BCG that way.

[@PepeDeezNutz]

I have 3 FOF BCG for sill

[@markbrouk7857]

thanks for reviewing, just bought 2 of them. bought a forged and a billet :O

[@Maxman92]

Dude that is such a good looking rifle I dig it a lot.

[@TheBeardedWretch]

Thanks!

[@Regular_1094]

I've noticed that PSA is always having issues keeping carry handle sights in stock. I've purchased 2, and each time I had to leave my email and they notified me when they were back in stock.

[@patrickwright3485]

Not sure if you mentioned but how is the weight of the two piece quad rail? Much heavier than a m-lok rail?

[@Regular_1094]

More than likely, the KAC RAS style rails are usually heavier because they have more mass of metal for the rails. If you want a lighter quad rail, let me recommend you the midwest industries quad rail, its like 7 ounces.

[@AJ-gk7bn]

Just for clarification, when you say you can change out the hand guard does that mean I could hypothetically change out the entire barrel? I bought a quad rail Sabre upper a week ago and I’m early waiting on it to show up. The only downside is I got the version with the normal nitride barrel rather than the cold hammer forged FN barrel and I’m starting to wonder if I’ve made a little bit of a mistake. Seeing as they actually sell the FN barrel separately I’ve been wondering if it’d be possible for me to upgrade to it later? And is there really that big of a difference between the nitride and chf FN barrel? I’m very new to AR’s in general so any input would be greatly appreciated. And also thanks for the thorough overview of the gun too.

[@TheBeardedWretch]

Yes you can swap out the barrel with an FN one. Or any barrel really. It’s pretty simple with the correct tool.

[@raymondfoster1498]

Father's of Freedom BCG very good chrome lined

[@TexasRedneck]

you mentioned that your 25-60ish yards and hitting steel. What setup do you have that you can hit steel at those ranges? Like 1/2" ar500 at a 45 degree angle? I see you posted a clip of the targets being hit but not real sure on their positions. What ammo are you using? SP or just ball ammo or green tip? Thank you!

[@TheBeardedWretch]

They are AR500 set at a 30ish degrees. ( don’t quote me on that) I can shoot them as close as 5 yards (not recommended) and have with no spalling but 25 yards is completely safe. I use standard 55gr ball ammo definitely not green tip. Hope that helps.

[@TexasRedneck]

@@TheBeardedWretch awesome thank you! Are they 1/2” or 3/8” thick?

[@adamadams6740]

I was looking at these last night wishing there was a video on them,thank you very much.I was wondering about the reach on the A2 stock I have short arms also,thanks again

[@CiviTac]

That handguard could be a good sub for the dd bloc2 handguard if you don’t want to spend 450

[@The100percy]

What exactly is the length of pull with the A2 buttstock?

[@TCraig00]

Head to a local gun store and ask them to hold any rifle with an M16 stock. Or are you asking about length of pull for AFT reasons?

[@GodGunsGills]

I'm painting mine as soon as it come in!!!

[@jeremywatson9129]

I apologize if you mentioned this, but what is the barrel profile? Just hoping they didn't use the A2 profile, thin barrel then thick from gas block to muzzle.

[@boopy123]

it says on the website that they are A2

[@jeremywatson9129]

@@boopy123 no it doesn't it does for there other rifles. Does not mention that barrel profile at all for the Sabre Line.

[@knightcustombuilds6988]

The bcg is decent as far as phosphate chrome lined bolts go. I do believe it's a micro best bolt. Father's of freedom, huh. Sounds like a play towards SonsOfLibertyGW. PSA👀

[@CarlPapa88]

Inspector Chad said it was G2G and the name most likely a shot across the bow at SoLGW.

[@knightcustombuilds6988]

@@CarlPapa88 Chad is definitely the inspector, he's like a bcg scientist if you will!

[@yif1274]

Psa Products are not cheap. Its cheaper when you have access to purchase straight from the manufacturer. Psa makes their own stock and the consumer can buy it straight from the factory. As they improve products and get better, the more and more value accrues. No third party vendor price guaging. Love it

[@HatsuneM1ku01]

Might want to go run a psa and a bcm through a rifle course then come back after and eat those words. Psa are cheap garbage plinking rifles that don’t belong anywhere actual defensive use.

[@HatsuneM1ku01]

And the only people impressed by psa are people who haven’t owned anything better than an Anderson, psa or bca rifle

[@martina6212]

@@HatsuneM1ku01are you always this full of shit? I’ve shot everything under the sun the psa Sabre is on par with most rifles. It literally almost feels identical to a bcm. It’s the same bolt that’s in Solgw. It’s a better barrel then the standard bcm and possibly even better then the bfh barrel. It doesn’t take a rocket scientist to assemble mill spec parts.

[@charlesludwig9173]

Specs say A1 stock not the longer A2. Also is the handguard free float?

[@masterxiong7368]

Would you say the upper is light? Is it comparable to Daniel defense DDM4 upper? Or even lighter? bc it's a shorter barrel with pin and weld.

[@TheBeardedWretch]

I haven’t weighed the uppers individually. But the PSA feels slightly heavier than my DD. I’d say due to the quad rail. I’ll do a comparison video in the future and I’ll weigh them.

[@ricklastname9427]

that seems like a lot of muzzle flash for a 4-prong flash hider...is that just normal for a 13.7"?

[@TheBeardedWretch]

The short barrel definitely doesn’t help.

[@autumnfragrance6326]

The stock is an A1. The A1 is 5/8 inch shorter than an A2. Do you know who made it? Does it have foam indide?

[@TheBeardedWretch]

You are correct I misspoke it is an A1. I believe it’s a PSA stock. I haven’t check if it’s foam. I’ll look tho.

[@MHSMokeEater]

I would like it in a .223 Wylde setup with a 18” barrel.

[@boopy123]

they do have that!

[@jstud999]

223 wylde has to be the most overhyped/overrated chambering

[@PollyMercocet]

Yeah just go 5.56

[@MHSMokeEater]

@@jstud999 I dunno would be nice to mix n march for ballistics and squeeze as much accuracy as I can.

[@GodGunsGills]

​@@jstud999yepper

[@surfrat8884]

How do they miss the carry handle? That’s weak.

[@TheBeardedWretch]

Yeah I thought so. But they did send it at no cost to me.

[@odrs]

great tip on that vig elite zero target I gotta use that

[@anthonygerber8261]

I want this exact rifle with a carry handle. Wouldn't mind an EOtech either.

[@nickrussett259]

Hey dude great video subbed. Hey, is there anyway you could look at your barrel and tell me what profile it is, if it is a A2 or M4 profile I'm not allowed to have it in my state unfortunately but I want to order one. I can order a heavy barrel or something that is just a straight profile. They don't have that information posted anywhere.

[@TheBeardedWretch]

Thanks! That’s lame. Mine has a slight taper at the gas block but that’s it.

[@CarlPapa88]

Sounds unconstitutional to me. Good luck man ✌️

[@Donjuan51]

It’s a decent build list, I wish they had just spent the $10 extra dollars and put a NOX instead of the trash jmac muzzle device. I also just don’t understand why people keep putting anti wall pins in their guns. You shouldn’t need them. They should have just gone with normal trigger pins.

[@TheBeardedWretch]

I do them as a " just in case" Iv had 1 rifle where the pins came out while firing. So to me id rather spend the extra $15-$20 and not have to worry about it.

[@jstud999]

If you understand how the trigger group in an ar works you’d realize how counter productive anti walk pins are. The trigger pins in an ar are designed to rotate when firing.

[@tstieson2012]

Yeah, my thoughts exactly. In spec pins with a properly installed hammer and hammer spring will keep the pins in. I feel like psa was just like “let’s toss everything by gucci in this and call it “duty”. I would have preferred less fluff and more QC steps for a “duty” rifle.

[@DRay-or4tc]

Good review. Liked the specs on these, looks like it’s GTG.

[@TheBeardedWretch]

Thanks! yeah its good from factory.

[@MatWestfall]

Great review!

[@danielcasillas1133]

That's a nice setup, I have it that same way

[@mtnbound2764]

man thats a cool looking rifle!

[@beck4218]

Bring the mic closer or use a lavalier. Appealing to the DD M4FSP crowd. Looks fantastic. Two piece hand guard!

[@richardmartin3243]

Need a 6.5mm Grendel upper for the KS47 lowers And still used AK mags and make KS47 BE 2 caliber rifle capability

[@30317john]

Thanks for posting Just picked up mine yesterday Cant wait to shoot it

[@snatchin5673]

why not put only 1 round in when testing if its drop safe? having multiple seems dumb

[@jpthomas9491]

Does the stock have a storage compartment?

[@Wyattduck55]

Thinking about the A2 lower and m_lok upper

[@nickvelez2604]

Would this buttstock lower work with the 10.5 upper? I know I would have to SBR it but would the buffer tube change anything?

[@elitefirearmsnc2419]

It needs a NIB bcg and SCS buffer. Charging sounds horrible, but the gun looks good overall.

[@TheBeardedWretch]

After putting some lube on it it did quiet down a lot. Thanks it is sweet.

[@elitefirearmsnc2419]

@@TheBeardedWretch lol!!

[@Crankone]

Like the gun for the price! That's a sweet deal. I would have to put a adjustable stock tho. I like the classic but I'm spoiled I guess. What a nice better than base gun.

[@roywall5231]

Just curious, what slot do you normally keep the adjustable stock on?

[@95airsoftrules]

I put 350 rounds through mine and it was running smooth until the adjustable gas block came apart.....

[@CarlPapa88]

I've heard, unless you have a suppressor, they're more trouble than they're worth. I'd be happier if they offered a pinned GB option myself.

[@davispinner6642]

Is that their own line of magazine?

[@TheBeardedWretch]

I’m not 100% sure if they make it or have someone else make it for them but it does have the Sabre brand on it. Seems like a decent mag tho.

[@jstud999]

That’s a microbest bcg. Easily the best part on the gun and the best bcg money can buy.

[@micemr76]

Curious why u say that. Not that I disagree just curious. Info on BCGs is hard for the newer people to the ar platform

[@HatsuneM1ku01]

@@micemr7658 steel bolt face, mpi tested, quality control makes sure it’s actually in spec

[@blacklilac1408]

Nice video! I have been looking into other hiperfire offers like there PDI & x2s mod .

[@TheBeardedWretch]

Thank you! They are nice I was pleased with the trigger for sure.

[@POSminiracer]

Did they ever come through with the sight they owe you?

[@TheBeardedWretch]

Yup. Sent it right over no cost to me.

[@AK_Mike_Actual]

Did you move the rear sling loop or was it installed wrong?

[@TheBeardedWretch]

it can be moved to either side.

[@Michaeldckry1]

What part of Tennessee are u in?

[@ajpeake9817]

Did you see the FDE version they jus came out with….it’s sick bro

[@TheBeardedWretch]

I did and it does!

[@Wyattduck55]

Do you guys know if they are coming out with any more other than FDE

[@ajpeake9817]

No clue...I didn't even kno abt the fde until I seen it. I want the bravo company furniture with the mlok rail with the fn barrel in fde. Patiently waiting

[@abolishtheatfandrepealthenfa]

The father's of freedom bcg is a microbest so it's probably the best part on that gun

[@jerrymannis2027]

What part Tennessee

[@fabiobio7401]

How big is the quad rail?

[@jackburton7959]

13 inch. It does protrude a couple inches in front of the front sight post, and it covers the bayonet lug. It is very rigid, quite robust. It isn't too heavy out of the box, but with a suppressor out front, it's a wee bit front heavy. (Sandman S)

[@isaacsanchez3966]

Nice I'll be looking into one

[@binostunts]

That buffer is noisy…is that normal?

[@boopy123]

IDK about "normal" but I had that same thing with a cheaper lower, but once I lubricated the buffer and buffer spring and charged it back a few times the noise went away completely.

[@TheBeardedWretch]

its very quiet once i put lube on it.

[@megaman010391]

He just forgot to spit on it. Lube it up and down you know.

[@b_doc6142]

Cool gun, I hate the trend going on the past couple years for people hold their thumb instead of griping in the pistol grip. I don’t like that because in real life scenarios and or self-defense no way anybody be shooting like that. I would practice like you play like it’s game time. Especially this case but shouldn’t need to since the guns in vise . Just another trend. I get why people don’t want to pull the gun when they put pressure on the trigger,

[@TheBeardedWretch]

I only do that when its in a vice to help me not push on it. But I agree train how you fight.

[@jstud999]

Lol slow down Rambo. Dudes literally shooting from a vice slow fire. Pretty sure you wouldn’t be doing that in a self defense situation either. I’ve done it plenty of times hunting though.

[@maze1914]

Dead Air will work with that muzzle device

[@87demora]

Is the gas block adjustable?

[@GodGunsGills]

Yes😊

[@KayoMonei]

Not with the front sight post they do have them but not with this setup

[@peachfuds]

Hello, fellow Tennessean!

[@blackbilly1965]

Good video bub, thank you

[@TheBeardedWretch]

Thank you!

[@TehSpury]

Should've gone with no forward assist.

[@nickvelez2604]

Nice rifle nice review

[@PollyMercocet]

People sleep on PSA all the time

[@CarlPapa88]

Sleep or shit? Ton of hate on them out here. In the end, people can only afford what they're willing to pay. Seems everybody has some shit to say about them.

[@Иванпонимаете-г4ш]

We need a Sabre lower because my upper is better.

[@CiviTac]

Keymo system is built for dead air cans. I wish you could pick the muzzle device. P&w sucks ass

[@TheBeardedWretch]

I agree. Picking your own muzzle device would be nice.

[@edward_the_bruce]

That would be awesome if they had some options. I'd love to get a surefire on there

[@garyjohns4711]

ok put t on paper that's the real proof of accuracy/ precision!

[@codyjenn8785]

That is an awesome gun I like psa

[@pinkeye00]

Don't like the look one bit. It's half dad's chevy and mom's prius.

[@virgiljohnson4260]

looks like a gun. kinda retro, i guess.

[@TheBeardedWretch]

Thats why i like it. Retro but some modern upgrades.