Very inspiring! Can you share the Dremel tools used for cutting your handguard?

That’s a lot of money for this test. I appreciate the information.

I wonder if it could be where the barrel needs to break in?

I’ve been trying to figure out which ar10 I want for a while now. The 716i is an option and haven’t really considered the Ruger. I keep wanting the Armalite ar103gn18. Is the armalite a good rifle??

Lights are for close quarters...why a light for 100 plus yards?

🇺🇸🤙☕️

That u & the ammo…Sig all day!!!

Thank you for your information. That is the same problem that I’ve been having. I had purchased freedom monitions ammo, and had the same exact issue. I contacted Ruger sent my rifle in and they gave me a brand new rifle said there was issues with the barrel assembly.

I’ve had nothing but problems my last 5 NIB SIGs . I got so disgusted I liquidated all of them from my collection. They have gone to 💩

What a joke

How is it holding up 2 years later?

I was a mechanical engineering technician on the Ruger SFAR line / AR 556. These guns are prone to blowing up we had people refusing to go into the range and shoot them via the sleds. The chambers reamers they used caused helix like spiraling, they had to unbox and rebarrel over 3k of these guns before the release because my first week on day shift I found this issue. The chambers were so bad that they had to stop using lube to test them in the range because it was causing a diesel combustion effect and causing the guns to explode. Do not buy one of these guns, I helped make them and wouldn't even own one!

Those bolt lugs are DRY AF. Lube your weapon.

Hello man , I’m new to the ar15 world I have an solgw tomahawk model that came with they liberty trigger and I was thinking about changing the trigger , what do you recommend a single stage or a two stage ? Thank you

How hot does that gas block get? Worth getting it with the “cheese grater”? Thanks

Are the insides of the mag pouches Velcro lined ?

Hornady Black 168 A-max does really good in my 20”. Great video!

I can't decide between this and the rise armament 535

Both great rifles. But I'll take the Ruger. My recommendation is put an adjustable gas block like rifle speed on it and it should be more reliable and still cheaper than the sig even with the extra cost for a new rail and gas block

Interesting enough after changing the trigger group to a Geissele 2 Stage trigger on my Sig 716i I'm able to shoot 0.875 MOA consistently using 175 grain SMK handloads at 100 yards (2.125 at 200 yards) and .633 groups out of 168 Hornady BTHP off the bench and a stable hold with bi-pod. Proper shooting technique unleashes the potential of this weapon on the bench, prone position, or using a braced position. Using ball 7.62X51 M80 ammo performs excellent at various ranges and shoots 1 MOA to 1.75 MOA 10 to 20 shot "stressed" hot rifle groups at 100 yards off the bench and 3 to 4 MOA standing. All that from a trigger upgrade and a good LPVO scope.

Hornady SF AMMO WAS POPING PRIMERS. TOO MUCH PRESSURE.

So im looking at the SFAR, not sure if there is an advantage to getting the 20" vs 16"?

Would be interesting to see a comparison with the 20 inch version.

My Ruger has had numerous problems, to many to mention. I will say it’s the mist accurate though. It shoots 1 hole groups whenever I do 1 shot groupings. Weird thing is though whenever I do 3-5 shot groups it opens up to 6 moa, that’s if I can get it to shoot 5 shots in a row

I'm currently running the rise armament 535 trigger on my scalper build I'm looking for a little more I'm looking at the ssp or a binary what do you think?

I hate to be overly critical, but in the first ammo test video you only measured 3 shots in your "closest" measurements and in this video, you measured the "closest" 4 shots. That skews the results.

Get rid of the muzzle brake. It doesn’t need it. A A2 looks better

Very solid, useful information. Your reviews are excellent.

Great evaluation. Very useful information.

I assume these groups were at 100 yards, right?

Awesome info. Thank you

People have been reporting barrel issues out the sfar. The worst groups I’ve got is about 3 inchs out of mines. You might wanna send it in so Ruger can check out your barrel. Or get a gunsmith to scope your barrel. You should be getting at least 1.5 moa out of some those loads with that optic. I can almost guarantee you have some sort of issue with your barrel.

Thank you for putting in the work for the rest of us. Wrote up a quick reference sheet. Ammo Grain Farthest Lowest Notes Wolf steel 145gr 2.9 1.43 Red army standard 150gr 2.8 1.19 Two bad primers strikes PMC Bronze 147gr 4 1.4 X-Tac 147gr 4.8 1.6 SAR M80 6.1 3.4 PPU Soft 180gr 2.7 2.1 Winchester M118 175gr 2.8 1.6 PPU Hollow point boat tail 168gr 2.4 1.5 Winchester White box 147gr 3.8 3.1 Hornady A-Max 168gr 1.9 1 Hornady ELD-X 178gr 5.1 2.9 Hornady A-Max 155gr 4.4 3.2 Hornady Match BTHP 168gr 2.5 1.2 Freedom Ammunitions A-Max 168gr 1.7 1 Lot of popped primers, lots of unburned smoke Federal Trophy Bonded 180gr 3.2 0.7 Federal Trophy Bonded 165gr 4.3 1.1 Federal Barnes TSX 165gr 2.9 2.3 Remington Core-lokt Tipped 165gr 4 1.6 Remington Core-lokt PSP 180gr 2 0.86 Federal Fusion Soft Point 155gr 2.5 1.6 Nosler Trophy grade Acubond 150gr 2.4 1.6 Nosler Match grade HPBT 168gr 1.3 0.83 Magtech M80 Ball 3.6 2.3

Really helpful video and good overall demo. Thank you.

Well, really wanted one?I’ve looked at dozens of these videos recently and all I can tell you is Ruger has real good customer service but they’re rifle less then worth a fuck if you have to send back 80% of the product put out. well it speaks for itself. I would be afraid to field this rifle once you open everyone knows your name and your the new favorite target weapons failure is catastrophic at that time so if you wanna shoot rabbits, you’ll probably be OK

All of the brass you've shown has signs of overpressure. They cut the chambers wrong on the SFARs. It leads to parts failure and if you run a silencer, the rifle has a chance of detonating.

nice "high precision scope" fro testing accuracy))

Just picked one of the same and I couldn't be more excited!

This is mostly on the 16" barrel guns?

audio is terrible low

Thanks for the video. Its too bad Ruger cracked the code on weight but most video reviews on this gun are about problems and customer service.

i just bought the sfar rail to put on a ar15 build used off someone, do you see any reason why it wouldnt fit on a regular ar15?

Thanks for the vid fam #GetOnGab

Beautiful rifle. Do you know the total weight with optic, sights , vfg?

Hello I’m a owner of a Ruger a Sfar, 308 20 inch barrel and I would like to change to a Silent Captured Spring which one can I use that will fit.

Glad you had a pleasant experience with customer service, but Ruger should not be using its customers for QA/QC. After seeing how many problems people are having with this rifle, I'd say it's a good idea, the super light-weight AR-10 and all that, but it doesn't work. I'd never buy it.

I'm reloading 168gr amax's and my 20" loves them.

dollar for dollar, I think this is the best AR out there ... Incredible bang for the buck

S hitty target,s hitty volume, shit review.

Carrying a pistol in there is kinda defeating the purpose. Its for extra mags