Panasonic AG DVX200 Tutorial

[@Aleksandr_Alex]

Благодарю, кратко и понятно. То что доктор прописал.

[@infinityproductions1992]

How come the display jumps to black after 10sec how can I change this? I do not have an SD card in it yet

[@SeanMalinger]

It could be that the eye sensor is on. If something passes over the electronic viewfinder (EVF) the camera "thinks" that you are looking into the viewfinder and will turn off the LCD screen. This can be disabled in the Menu, though the best thing to do is to rotate the EVF up into the vertical position. This will ensure (for the most part) that nothing will be blocking the viewfinder and the screen will remain on. After reading your comment, I looked through the camera menus and did not find any timeout function. There is a economy function, however when I turned it on it did not cause the screen to time out. This leads me to believe that it may be the EVF eye sensor being. blocked. I hope this helps.

[@knynsc4336]

Tell me how to set peaking?

[@SeanMalinger]

You can find the setting under SW Setup in the Menu. Peaking Color is where you can set the peaking color. Peaking Level is where you can set the degree to which it shows peaking. When you scroll down to Focus Assist 1 you can set it to Both, Peaking, or Expand. When set to Both it will blow up a section that you can drag around and show the peaking of the magnified section. When set to Peaking it will not magnify a section it will just have focus peaking. I hope this helps.