Paparazzi Accessories Jewelry Training Video: A12 How To Make Display Boards Pt1

[@JoanneMcCrary]

Nice jewelry board, you're very creative. Thanks for sharing.

[@bonitabishop7458]

This is the most detailed but simple, to the point tutorial I have ever seen on this project. I am so excited and forever grateful for you and cannot wait to get started. when i get off work today going straight to Lowes Yess!!

[@Team-Love-Life]

So glad you found this helpful! ☺☺

[@christalmize7860]

I know this is probably an old video but thank you very much for making this video. I did take notes in the measurements and the hinges you were saying you used. As well as the screws and bolts and such. So I’ve taken notes so I don’t need a PDF file that everyone seems to be hung up on the fact that isn’t there. I will be going to Home Depot and getting the supplies and my husband can make me a few of these. Thank you so much for the in-depth process of how to do this. I will also be figuring Out the sizes I will need for my smaller ones for the earrings and bracelets. Thank you so much God bless

[@andreawellman4461]

You have restored my faith in humanity...or at least in this internet people... at least for today. I dont think we realize the full impact of negative comments... because when I read it, I'm also bothered by whatever is going on... So thank you for adding your grace and much needed perspective... as well as the reminder that you may have to work for it. (By watching the video.)

[@toniettawatson6394]

pppppp

[@sassyclass2555]

A 4x8 sheet of peg board will do 6 panels of 32 inch x 24 inch each. 😉👍

[@d.h.9082]

Thanks Frank! So easy to understand how you've explained it. In Lowes right now!

[@geraspaparazzijewelry-inde9764]

exactly what I've been looking for-yes years later and it still helps other. I read comments below and hope you are doing much better

[@CarolynNooney]

Thank you for the video. First, I pray that you are in remission and that all went well. Of course the PDF isn't there but if people would read down then I'm pretty sure they could figure out measurements from other that have commented. God Bless You 🙏

[@MichellesHandmadeCreations]

My husband and I built something similar, but we used 3 separate hinges. I REALLY like the piano idea so much better. It's got to be more sturdy. We sandwiched poultry wire between narrow molding and 1"x1" strips, which worked great for displaying my greeting cards. I think I'll now have to upcycle what I have using peg board or hardware cloth for my jewelry. That is, if the sandwich will separate. We used wood glue and finishing nails cuz we didn't want to split the thin molding. Regardless, I gleaned some great ideas from this video. Thanks for sharing.

[@JennieSmith8156]

Michelle's Paper Creations what's the pegboard measurements?

[@bignamebigattitude3671]

GREAT CONTENT AND HOW TO MAKE IT STRONGER!!!, GREAT JOB AND THANKS FOR SHARING!!!

[@Debbie-gr9hr]

Brilliant, just what I need for craft shows. Thank you, will get cracking on this asap :)

[@marniep4332]

Many thanks, just what i was looking for. Now i am off to buy a drill x

[@ritagardnerritathemotivato4215]

Thank you for sharing this information. I love to see other people sharing their creativity.

[@henriettajones1564]

Thanks so much and God bless for your help. Much success in your business

[@renaparker4579]

Wow, I love this video! You made it look easy enough for me to do! Thanks so much!

[@Team-Love-Life]

Thank you for the love, Rena!! 💝 We're so glad to know that you find the video helpful & practical!! 🥰

[@renaparker4579]

@@Team-Love-Life I like it so much I shared the information with a group of jewelry lovers last week.

[@rockwithmeboutique2188]

Thank you Sir. You just saved me so much money Bless you and your family 💜💜💜💜

[@Grace-ty9un]

Thank you for sharing. This is helpful. Wishing you much success with your business!😎

[@aishaspaparazzijewelrybox3902]

Great video. I'm seeing this year's later. I pray God is covering you & your family.

[@applecharm9130]

Great video !!! Thanks for the DIY

[@darrylwilson9417]

I believe you all have helped me find a solution for a portable case for my laser engraver, thank you.

[@Team-Love-Life]

Awesome!! You are so welcome! Thanks for watching 😊

[@dianaromero4109]

love it...exactly what i was looking for....thanks

[@lifewithlois7262]

Very cool Thanks for sharing God Bless 💕💕☕💕💕

[@sundra9sandifer765]

Great video. Thank you

[@HOODSSWEETIE]

Thank you, awesome tutorial.

[@flamingoladydee3566]

thx much for this display idea. Now if only I had a saw. I may try to use liquid nails instead of drilling in screws. Could you add the attachment , would love to see how you laid out cutting the pegboard too. thx much.

[@octaviabarbour]

Hi 👋 thank you for sharing this I know how to do my business

[@Team-Love-Life]

Glad it was helpful!💖

[@carinasoria8445]

Wow I really love it. Thanks I appreciate it it is really helpful

[@christinacole5993]

I also don't see the pdf file that you say that is attached. Thanks

[@nataliadosantosnds]

Me neither..🤨

[@summerdays360]

Thank you for sharing 🙂

[@Team-Love-Life]

My pleasure 😊 Thank you for watching!

[@amandasdesignsss]

Hi I'm not seeing the pdf in the description. Can anyone point me in the right direction?

[@virginiabanks7824]

did not see a PDF attachment if there is a PDF attachment is there a possibility to get one put up

[@seaglassbarbara5083]

Curious to know if maybe there is a way to add "inserts" to hold more jewelry. I do Jewelry sales on the fly, and would like to be able to hold as much as possible.

[@2008tinythecat]

Thank you I pray that you’re well and in remission

[@Pretty_Browngirl_Aries]

I am interested in the sizes that you used on the very last case for the earring and bracelets.

[@evettemoss2746]

Hi. I don't see the attached pdf.

[@carinasoria8445]

Thanks for the information

[@avatiascosmetics9749]

Very helpful

[@Team-Love-Life]

Glad to hear that! Thanks sweetie ❤

[@LisaAnn_25]

Nice 👍

[@keishabrown2694]

Where are the dimensions

[@samsmom400]

THANK YOU!!!!

[@TiggerScorpio2]

Please add the subtitles thanks

[@NaturallyMeca]

Hello, I like this setup. Can you send attachment? Will try this soon.

[@artisharichardson5139]

Hope all is well do you sell them

[@melissapeacock876]

What kind of drill did you use?

[@patriciaharrell9631]

What’s the size of the case you just made?

[@jaquelinevazquez728]

Name and size wood stick ?

[@GannyAngie]

I know this is old but I needed some instructions. He did not give any sizes for the peg board, the hinges or anything. Now I have to try and figure it out.

[@Team-Love-Life]

I'm so sorry. Shortly after we posted this video, I got cancer and never got around to putting up a PDF. I would measure out your car, and figure out a size that would work for you personally!

[@zgns145]

Thanks for your video. Sending blessings and a hug.

[@GannyAngie]

I figured it out and I posted your video to group page, I built three. I have a van so I did two 24x42 and one 24X30 was going to do two but they ran out of peg board. I have three pieces left and they are small so I will make four smaller ones for rings and bracelets. I pray all is well, been there done that, the chemo and radiation cancer free since 2006 I pray the same outcome for you my brother.

[@brendacyr8228]

I am so sorry to hear you got cancer. I hope that treatment is going well. Thank you for this video....it explains how to build for a novice like myself which I appreciate. Take care!

[@rosinagatewood5372]

Angela Greene I'm slow what are the measurements for the lumber. I know the 2 pieces on the short side should be 24 but what about the long sides. He said something about they should be shorter so what would that measurement be

[@elsemiles3477]

I also don't see the pdf file that you say that is attached.

[@TheNumbaOneMiss]

How do you make one of these with an extra page in the middle?

[@CarolynNooney]

You could extend the 6" to 8" and buy two more piano hinges to let move either way.

[@Bingo_Bling_GlamMa]

Can you provide the measurements

[@taheselay9892]

Hello, do you sell these? Is there anyway i can order these from you?

[@SneakerGoodsMiamiTV]

Does you guys have one like this for sale?

[@JennieSmith8156]

What's the measurements?

[@cbrantley789]

I do not see the PDF.

[@deletaylor9378]

the attachment is missing

[@fbrown613]

Do you sell these can I purchase this from you

[@fbrown613]

Hello, do you sell these Display Boards

[@photogrl001]

I do not see the attachment for your pdf

[@elsemiles3477]

I also don't see the pdf file that you say that is attached. I REALLY NEED IT NOW. I HAVE A SHOW THIS WEEKEND

[@andreawellman4461]

Wow... that comment is so selfish and gross. Just garbage. You are Yelling, and didn't even bother to thank him... just make demands. But who are you anyway? To jump when you say so... No. Demanding rudely that someone do something for you just because YOU need it is such a self absorbed thing to say. He made this for us for free. Figure it out, go buy one or dont. But with that attitude... good luck.

[@anitacoley7642]

where is the attachment file?

[@yumi123eek6]

Sorry but if yall use your brain you could figure out the size of the board you need , the screws , and a drill is a drill as long as it works.

[@andreawellman4461]

Hi Hope! I do have a brain, I swear... (Well sort of thanks to an illness that makes it foggy...) but when it comes to things like measurements or parts... some things just I just cant eyeball... no matter how hard I try... But I can help you work through your feelings, and I can talk about empathy like nobody's business... But really, what measurements would you use? Should I just measure the pegboard holes to figure out screws? And do I need to worry about drill bits?!

[@sandyknowles5638]

The aesthetic makes this otherwise awesome creation look extremely cheap