Paper clip keycap puller

[@shapedokkan]

one of the simplest nice looking keycap pullers I have seen

[@jeremymartinez8146]

spoken true words

[@5alamander]

Straight to the point. Love it. No nonsense intros.

[@AnthonyJames7]

A genius! I was stuck on wrapping the last clip to hold them together and didn't finish it. Giving it another go

[@jeremymartinez8146]

well this quite is nice but a bit difficult and may take a few tries.

[@Joshuah2837]

KeebWarriorTony you could also try air hardening clay

[@dimandos48]

jokes on you i did it with clips hands and a wall

[@adonesjb]

Practical, easy, cheap and beautiful. That's what I needed. Thanks, great video. Greetings from Brazil. 🇧🇷🤗

[@atulabid5029]

loved the fact how you measured everything

[@ankit5725]

Man i love this video not for the keycap puller but how he did all the things was so satisfying for me

[@Mikko_Mystery]

I just watch a 15 minute video on how to make a keycap puller I don't even have a mechanic keyboard

[@deviantntskink7244]

The thing, even more sad than that is you watched a 15 minute video that could’ve been compacted into a two minute tutorial

[@unfunnyfailure]

My keyboard is not mechanical but the key caps are removable. Also, Its spill resistant which is great

[@bananabandit2]

You saved so many people so much money thank you so much good sir I hope the best for you. God Bless ❤️😁

[@amvriku]

A very nice and easy tutorial, thank you for that. I love this diy keycap puller. i dont wanna sound weird or anything but i love your voice :)

[@NikkiHubYoutube]

Fantastic video. I made it and it worked and now I feel like a tech mechanic 🤣 thank you!

[@shrimpp866]

now time to search for DIY Paper Clip since I don't have one xD

[@vaayuo]

Couldn't make it as clean as yours but it definitely works

[@MemerDad]

Finally someone that makes sense. Thank you

[@crimsonboo8048]

This one is excellent!!! I made myself one by soldering 2 clips and and the plastic part of an USB token for the grip.

[@winniepooh8367]

Your a lifesaver this worked so much better than prying of my old office keycaps with a pair of scissors and a screwdriver! (Well that was to be expected XD) THIS IS AMAZINGG

[@dimandos48_]

1'st one did with my hands- works a bit wierd and is round in shape 2'nd one did with my hands and a brain- works as any other keycap puller Thx Tim!

[@jeremymartinez8146]

i think it's perfect and if you see a review on this model of a Keycap puller, it really won't damadge the keyboard nor the keys.

[@owliewastaken2473]

thanks man I had to get a keyboard and milky yellow switches but if i got a keycap puller it wouldnt fit the budget thank you so much!

[@andieg8615]

Thank you! I made one from some smaller paperclip and they work. This will save my finger tips from swelling when I remove the keycaps by hand haha. A little word of caution. If you use wrapped paperclips, remove the wrapping! Only paperclips available in our area were all wrapped. It made the paperclip too thick to fit between the key caps.. I stripped the rubber like wrapping about 1cm from the bottom. I used a nail clipper since it was easier to fit.

[@Jokypond]

yeah same, i removed the wrapping from mine using scissors like a knife

[@iPhroggy]

sorry i’m a year late, but you can pull your spacebar, i’ve always pulled my spacebar a one side at a time because i hate stretching my pullers to begin with. just pull one side up, then the other afterwards, usually it entirely disconnects with one pull of one side but in the case it doesn’t, you just pull the side that didn’t come up afterwards

[@timburr9871]

You have to either do it your way or make two pullers

[@yj677]

didnt have paper clips but had some odd wire lever thing in my drawer i used the corner pull method and it works just as well!

[@carlogordillo9222]

What a beast!! like it a lot

[@randough]

tried this and it actually worked ty so much would recommend

[@matthewsoto2749]

me clicking on this knowing i won’t make it

[@inforced]

Isn't it too small for the keys or does it work fine?

[@balintgyongyosi7269]

I think it's small so I made mine with a 2 cm gap

[@AEkijam]

Mind blowned*

[@olympic285]

5cm is 2 inches if anyone is confused. Not criticizing btw

[@lillybilly4007]

Just made my own puller following this tutorial. Was pretty easy until the coiling part rip my fingers. Works perfectly though!!

[@leonruvalcaba1549]

But it was totally worth it in the end wasnt it?

[@kevinmacias4871]

Instructions unclear, I am now stuck on top of mount everest

[@richardrises]

I'm trying to expand on this to create a version capable of removing a spacebar. Maybe 4 "legs", one for each corner? Or wider ones to completely go over each small edge?

[@emimaxim22]

can't you just like pull the spacebar out?

[@leonruvalcaba1549]

@@emimaxim22 fingers are the keycap pullers of nature

[@emimaxim22]

@@leonruvalcaba1549 in thats how i did it 6 times before this one but its kinda hard pulling au the letters out

[@artinnemati332]

hi nicejob , for enter and space what we can do?

[@balintgyongyosi7269]

Hands

[@melmels1337]

life saver!!! in my place the shipping cost is more expensive than the puller 🥴

[@GWCGamingwithChittaarth]

Thank you! It costed me fingers and 1/4th of dollar

[@pzg625]

my left ear enjoyed this video

[@vishwanathveerni5007]

Thanks a lot for this man

[@ProttoyDipto]

Nice and simple, as all things should be 😌

[@userg23]

😲hey brother.. this is a "Very Rare" keyboard layout.. it has a "Big Enter" key and "Big Backspace" key. Which brand is it ?? Plz tell me where can i get it

[@milklover45]

since in my school we get air dry clay i can make it just by making the rough shape then covering it with clay

[@windestruct]

It works better than my fingers

[@mistiriv]

A true wire wizard

[@kitara7787]

This is so productive cool shit

[@aleckingjm]

You sir are a fucking genius. Einstein pales in comparison.

[@Mexidudes]

okay so i might have made the ugliest one cause i only used my hands because i’m at work but it still functions as needed! thank you!

[@sakrosark5024]

You are a god, thanks for video is very nice

[@Clarkscorner752]

I would recommend not using needle nose to flatten the clip but use needle nose for everything els

[@jomarkredito9497]

Please make how to make switch puller please

[@dimandos48]

yo i did it with none of the tools it looks bad but it works Edit: Thanks for the vid, i was using a ruller and a brcken match before.

[@phantom3292]

Yo, this looks really cool but I’m having trouble bending them at the right spots and making them straight, any tips?

[@zauspp]

i didnt even need to tighten the coil comepletely since i was gonna use it only once it worked perfectly on my apex pro B)

[@ROO1KAT]

I added some hot glue to the top to make a nice handle aswell

[@slyferson9827]

The power of saving money

[@franciscobernal1606]

te amo señor que dobla clips de papel jaja

[@Ciclon753]

Wow I like it !! Thks

[@Jokypond]

man this is hard since i have no pliers

[@doubleabatteries-b3t]

Thank you

[@AmitKumar-gs6es]

Nice

[@ryanlillie8469]

Great video man. Thank you. Just a bit long though.

[@condorX2]

Brought 1 keycap pulley from China on eBay for a dollar. Found out my half keyboard is membrane and not mechanical.

[@gmf8999]

60 keys 1 genius

[@fedorlubensky]

Thanks

[@chrono2738]

Are you south African ?

[@romansmovin]

THIS SHIT IS SO HARD

[@valerymilev8336]

ty bro it works

[@Unpug]

Amazing

[@bruhhtha4769]

wish i could find a paper clip :(

[@SaveAmerica-TRUMP2024]

Mine came out looking like @SS, but it works. Coiling is a pain. I use 2 pairs of pliers, one in each hand. Thanks for the video.

[@KBDology]

WOW...

[@edt9697]

His bending skills are good but his math skills, not so much.

[@ryanlillie8469]

Watch at 2x speed.

[@shukuzi]

jamais j’arrive à faire ça

[@mariaarmijos8269]

Es la punta plana la pinza

[@CALIBODV]

Why u have the shakes bru

[@foxly3861]

Legend

[@jeremymartinez8146]

he truly is a legend.

[@ErCapoAlex]

Up

[@Panopticonae]

15 cm ?! What is that xDDD

[@salty_is_mad829]

dame i need a keycap puller not a hole math lesson