Thanks for a great video - love stencils so now I can make my own with a variety of shapes. Doing the pattern interval was a super learning curve for me too. TFS . xo
@Charlene529 Жыл бұрын
Thank you for these videos. You are an excellent teacher!
@PaperedChef Жыл бұрын
Thanks so much for your support! I appreciate you.
@Schatzie301 Жыл бұрын
This was brilliant. You need to work for Brother. No one there was able to give me any guidance. I just got my SDX 125e after owning a CM350 for 4 years. The SDX, when attempting to cut very small, intricate designs, has been chewing up or ejecting pieces of my design from various thickness of cardstock, even as thin as 80lb. These were the same designs I cut successfully on the CM350. I assumed it was something in the settings so called Brother for advice on altering them. I was told I needed to call my local Sew n Vac (not sure why as I bought my machine from Amazon). They told me that if I didn’t buy it from them they weren’t responsible but they didn’t think the SDX125 would cut cardstock. (I’m not kidding!). I haven’t tried altering the defaults yet but I’m confident I can now feel better about spending all this money on a machine that so far hasn’t performed as well as my old one. You are such a gift! Many thanks.
@PaperedChef Жыл бұрын
Wow! I cut mostly cardstock. They must have had a real rookie answering the phone that day. Thanks for your comment. I hope you will take some of my courses and join my FB group. We delve much more deeply into topics in my courses. Udemy Courses - ScanNCut: thepaperedchef.com/brother-scanncut-courses
@Marilynlovesebiking2 жыл бұрын
Loved this video on creating stencils. I also really like the cards you made. They are super attractive.
@PaperedChef2 жыл бұрын
Glad you like them! Thanks for watching and for taking the time to comment.
@lindaraines474 Жыл бұрын
❤❤Thank you for your time and sharing your knowledge! I am trying the confetti tip. Your tutorials are full of so much information. I watch them, put them on hold and try them as you do the project. Keep sharing you are a blessing to those of us that are fumbling through this adventure. 😂😂😅😅❤❤
@barbfiore85984 жыл бұрын
Thank you Kim. What a difference those masks make to the final results to the cards. You are amazing.
@PaperedChef4 жыл бұрын
Thanks Barb, they really do add that extra touch of texture. I want to share how to use the stencils with embossing paste too because that makes the cards 3D. Glad you are watching.
@carolynmanning763 жыл бұрын
Congratulations Kim. 🎇I’m not surprised you have so many followers. You help so many of us learn how to use the scan n cut machines, had I not found you my machine was going to be packed up & sent back, I was so frustrated. I’ll bet I’m not the only one you saved. You teach your methods so well. I’ve watched other scan n cut videos and non can compare with yours, keep up the great work. Many thanks.
@doloresfarr66812 жыл бұрын
This is great! I'm still learning from you a year after getting my machine! I have loved it and put it to good use. Your tutorials have been so helpful. Thank you.
@Cards4Cancer4 жыл бұрын
Thank you so very much Kim. I am one of those people who had asked for this info on stencils. So excited and saving it in my Scan n cut folder. Thank you, thank you.
@PaperedChef4 жыл бұрын
Your Wish is my Command. LOL. I get a lot of requests for stencils and I was searching my OWN KZbin Channel and had a hard time finding all of my stencil videos. I have a lot of them but I was calling them stamping masks, etc. Therefore, I wanted to make a new video and have Creating Stencils in the title. Glad you like it.
@Face-bz6il Жыл бұрын
Thanks so much . Just tried the shape you had and got 300 shapes and came out perfect and I used the link you gave me, You are a great teacher and keep up the good work.
@PaperedChef Жыл бұрын
Awww, thanks for your feedback and for trying what you learn! Made my day!
@deejohnston36664 жыл бұрын
thank you , I didn't know the things I could do on my CM250, until I watch you!
@PaperedChef4 жыл бұрын
Thanks Dee, I also created a stencil tutorial using the CM series. kzbin.info/www/bejne/ZovKdZh5o9N2naM
@lindagainor58903 жыл бұрын
Thanks Kim! I have learned a lot from you
@PaperedChef3 жыл бұрын
You are very welcome Linda. I appreciate you watching and I hope you will make your own stencils too.
@jgsdes4 жыл бұрын
Kim, Congratulations on reaching another milestone. You do a wonderful job teaching the Scan n Cut. Whenever I have the chance, and someone wants to know where they can go to learn more on the Scan n Cut, I always tell them about you.
@PaperedChef4 жыл бұрын
Thanks Doris, I appreciate you sharing my channel with others and helping it grow so that more crafty friends can see it.
@sandrasneed31804 жыл бұрын
Wooooohooooo!!!! Congratulations!!!! I love watching and learning from you💜
@PaperedChef3 жыл бұрын
Thanks so much Sandra! I appreciate it.
@2848Adriana4 жыл бұрын
Hi Kimberly, Love how you created the stencils, very practical and can be used over and over again, and the cards are all so lovely, well done TFS, Cheers Anna.
@PaperedChef4 жыл бұрын
Anna, I am glad you like this tutorial. I love how we can use our machines for so much more than paper. I'm still making cards with the same color and then I can just wash off the ink with ease. If I have small stencils for stamping masks, I just store them right inside of the case with the stamps.
@susannek.54003 жыл бұрын
Thank you for the great video. Your ideas are wounderful. 🌸
@PaperedChef3 жыл бұрын
You are so welcome! Thanks for watching! This is a fun technique for sure.
@christineatkinson14254 жыл бұрын
I love your tutorials, easy to follow and I have learned loads from you . Thanks
@PaperedChef4 жыл бұрын
Thanks Christine. I'm glad I can help. My goal is for my viewers to be able to repeat everything I'm doing and get the same results.
@denisedornbusch10024 жыл бұрын
Great tutorial. I always recommend your tutorials to scan n cut users.
@PaperedChef4 жыл бұрын
I appreciate you doing that Denise. It’s because of viewers like you that my channel has reached a wider audience. I’m glad you liked this.
@lynnmcfarlin62612 жыл бұрын
Wow! A whole new world to explore❗
@PaperedChef2 жыл бұрын
Oh yes, it is mind blowing!
@lynnbartlett41852 жыл бұрын
This is great. I am learning so much from you. Thank you
@hamidehorra48494 жыл бұрын
Your cards are beautiful! Thanks for the tutorial!
@PaperedChef4 жыл бұрын
Thank you. I am glad you like what I did with the stencils.
@carolynmanning763 жыл бұрын
Forgot to say those cards are fantastic.
@kiwisunshine96313 жыл бұрын
OMG! I will be making my own stencils from now on, so that means more money saved! Awesome informative video, and very easy to follow, especially as I have only had my SNC machine two days! Already I have learnt so much. Many thanks -stay well:-)
@PaperedChef3 жыл бұрын
Glad it was helpful! Oh yes, this machine pays for itself many times over. I really love it. Thanks for watching Kiwi!
@mariebrennan12293 жыл бұрын
Hi Kim I just found your channel yesterday and I learned so much already and I love it, thanks so much for sharing 🥰
@donnahardey54664 жыл бұрын
Excellent! I am definately going to make some stencils. Thank so much.
@PaperedChef4 жыл бұрын
Right on Donna! There are so many great uses for the ScanNCut. I love making stamping masks and stencils. You can just wash them off and you are good to go.
@deedeemac4 жыл бұрын
Best video for mylar stencils I’ve seen. Thank you! Now I don’t have to order my circles from retail!
@PaperedChef4 жыл бұрын
Thanks MaryAnn! I appreciate your comment. You get a heart for my tutorial being the "best" - I try not to compare myself but I am happy to hear this was so helpful.
@debbiewilliams1554 жыл бұрын
Another GREAT tutorial Kim. I love watching and learning new things from you. I already have a idea of a shape I want to use for the stencil. Thanks again.
@PaperedChef4 жыл бұрын
Debbie, that is great you have a specific idea in mind already. I love ❤️ having so many built in shapes because we create so many fun things without even using Canvas Workspace. Thanks for watching.
@carlaschrum3 жыл бұрын
your awesome you inspire me thanks for taking the time to do videos!!!!!!!
@pterrys3 жыл бұрын
Excellent tutorial...thank you for sharing!!
@PaperedChef3 жыл бұрын
You are very welcome. Thanks for watching Terry!
@victoriahill72183 жыл бұрын
Subbed...you are now v close to 30k!
@pafloyd84 жыл бұрын
Thanks so much for this tutorial! I love stencils for blending colors and making backgrounds. When you went through the shapes, I saw one that I'll probably try for making a rainbow. You always get me excited to try something new!
@PaperedChef4 жыл бұрын
That is awesome Polly. You can have fun making rainbows 🌈 similar to the one in last month’s Paper Pumpkin Kit. If you sponge color all of the layers, I think it would be even easier to line up than photo polymer stamps. You are very welcome! Glad you are watching.
@rosemiller15964 жыл бұрын
I am so thankful I found your tutorials!! Love the way you show and explain that is so easy to follow. Looking forward to learning more from you on how to use my new "toy" :)
@PaperedChef4 жыл бұрын
Thanks Rose. I may have missed your comment before but I appreciate it just as much as if you just wrote it. I hope you check out other tutorials on my channel. Thanks for watching.
@gailfort-cathey4954 жыл бұрын
CONGRATS!! Im so happy for you!
@PaperedChef4 жыл бұрын
Thanks Gail! There was a new question so I finally saw your comment. Sometimes comments get lost in the KZbin shuffle.
@mariselayoshikane447 Жыл бұрын
I’m so happy if found you!
@PaperedChef Жыл бұрын
Well I’m happy you found me too Marisela. Thanks for watching.
@kathyf68824 жыл бұрын
Awesome tutorial Kim! Making some stencils is next on my list. Thanks so much for all that you do :-)
@PaperedChef4 жыл бұрын
Thanks Kathy, it is a fun way off adding more interest to a card and with embossing paste, texture too. So much fun. Glad you plan on trying it.
@elizabetheddy10734 жыл бұрын
Oh my goodness! I have been dying to see how to do this!! I have the CM 350 and would love to see you do this with the 350. I only use my CM 350 for cutting out stamped images and I’m still struggling with certain things. Even when I use your pencil trick sometimes the 350 will cut inside some of my images? But because of you I actually had enough courage to try it and start using my machine! Congratulations congratulations on your 19,000 subscribers! I know you will reach much higher numbers as time goes on! Thank you so much again for always making such informative videos and inspiring so many of us!! Liz Cape Cod Massachusetts😊❤️👍🏼🎉🎉🎉
@kiminalaska93634 жыл бұрын
Thank you for sharing your talent with us. I recently bought a scan n cut and need to play with it more so I can get the most out of it.
@PaperedChef4 жыл бұрын
Hi Kim, it is my pleasure. I’m a big believer in practicing what you learn so that you can make the most of your machine.
@sew1derful3 жыл бұрын
I have some mylar and I need to cut quilting stencils. Thank you!
@PaperedChef3 жыл бұрын
You are so welcome! It really is easy to do and I love that you can just keep on washing them.
@judyestrada14464 жыл бұрын
Kim- Wow Congratulations on reaching so many subscribers! Fantastic achievement! It is not really a surprise as you do a great job on your tutorials. These are Wonderful Cards! You done a fantastic job on these cards! What a great tutorial on using the Mylar. Thank you so much for sharing this information with us. You will soon reach a new milestone on subscribers!👏👏💕
@PaperedChef4 жыл бұрын
Thanks for the love Judy! Once my Crafty Friends get used to my quirkinesses, they keep watching. I like to just do my own thing without being influenced by how anyone else does it. Thanks for sticking around. I’m glad you like this tutorial.
@erikavolltrauer85493 жыл бұрын
Another great tutorial. You have helped me so much in navigating my DX machine.
@sharontuckerlewis73254 жыл бұрын
Congratulations! I found you before I ever got a DX 125.
@PaperedChef4 жыл бұрын
Thanks Sharon! Well, I am so glad you found me. I will keep the tutorials rolling.
@kathrynkennison31582 жыл бұрын
awesome tutorial
@stephaniepaterson63403 жыл бұрын
Thank you for this! I’ve spent ages trying to line things up one by one! I tried on canvas too but couldn’t do it....going to try this now...thanks again!
@juliepemberton83622 жыл бұрын
You are inspirational!
@PaperedChef2 жыл бұрын
Thanks so much Julie. Glad you enjoyed this.
@mydyisgod4 жыл бұрын
I love just thinking of doing this,!! TSMFS WITH US ALL. ❤️💕💖❤️💕💖
@PaperedChef4 жыл бұрын
I'm glad you are excited about the possibilities. I hope you make some fun stencils for your projects.
@IraQNid3 жыл бұрын
You can use your finger as a stylus. It isn't like a multi-touch touch screen display but you can use your finger to drag and drop objects and to swipe up and down the selections instead of using the arrow keys. Run the mylar through a Xyron cold press lamination machine to adhere printed paper to it with different types of adhesive cartridges. Then you can make sturdier confetti. The current trend on Etsy is custom-printed confetti. With the lamination+adhesive cartridge you can create laminated custom printed, custom cut confetti. Maybe add some holographic film and you're cooking with gas :) Lots of cool ways to make custom, cool looking confetti and other projects.
@cherylwells12664 жыл бұрын
Great tutorial, Kim - I think I will do a stencil of regular stars for using as background for 4th of July cards - thanks for this great info!!!!!
@PaperedChef4 жыл бұрын
Perfect Cheryl, I love seeing how you take the concepts and apply them to different projects. I hope you will share your patriotic cards in our ScanNCut Group. Thanks for watching.
@imeldaoneill77474 жыл бұрын
Congratulations!!🍾🎉
@PaperedChef4 жыл бұрын
Thanks Imelda! I appreciate that.
@TheMrsLibelula4 жыл бұрын
Congratulations! I've learned a lot with your tutorials.
@PaperedChef4 жыл бұрын
Thanks Sonia, I am glad you learned new things and I will keep the Tips & Tricks coming.
@materialgirl3382 жыл бұрын
Love you. Were is the video for cutting your own dies ?
@riyanakousor29722 жыл бұрын
Thanks so much for the very helpful tutorial. May I ask what is the thickness of the Mylar you used here? I am looking at buying a SDX 1250. Description says that the max depth it can cut is 3mm. So I am a bit confused here. I was hoping to use it in 7mm or 6mm Mylars. Any help is much appreciated. Thanks
@susancrosier54204 жыл бұрын
Excellent tutorial!! I did it along with you and love the results. Would love to see how you create different stencils either using the Canvas workspace or by combining shapes. Congratualations on your milestone of 19,000+ subscribers. You go girl!!!!!
@PaperedChef Жыл бұрын
Thanks so much! I appreciate your comment. I keep on growing and "try" to keep up with comments.
@elsabarkhuizen78724 жыл бұрын
Congratulations and thank you
@PaperedChef4 жыл бұрын
Thanks Elsa! I appreciate you watching. Growth was so slow for the first couple of years and then it my Crafty Friends came in droves. I’m glad you are one of them.
@joytaber1 Жыл бұрын
How thick is your mylar? What is the best thickness you can suggest? Thank you for this!!!
@createinspain4 жыл бұрын
I use a completely different cutter normally, a Silver Bullet Platinum - but I have cut quite a lot of stencils. (I happened to get a second hand Scan Cut the other day, just to play with but that's another story. You may or may not know that there is an alternative to traditional stencil material which is a lot cheaper and that is binder covers. They come in different weights but I bought 100 of 240 microns (thicker) A4 binder covers for around 10 euros....Cuts well too.
@PaperedChef4 жыл бұрын
Oh yes, I’m familiar with the Silver Bullet and used one in the past. Heavy duty. Oh I have used about 20 different materials for stencils. I bought this in bulk and it’s the gift that keeps on giving because I still have so much Mylar. Some of my viewers use cutting mats from the Dollar Tree. Anything goes while making a stencil. My materials are pretty cheap. I make 4 stencils for less than a dollar.
@createinspain4 жыл бұрын
@@PaperedChef Great! The Platinum is a large double head version, so the Scan cut feels like a baby one! I too have used all sorts for making stencils, depending on what I wanted to use them for. I'm still wondering if to stencil a colour shifting design on the Scan Cut :)
@domi23912 жыл бұрын
Thanks!
@PaperedChef2 жыл бұрын
You are very welcome. Thanks for the Super Sticker!
@Caroline-fp9sq4 жыл бұрын
Thanks Kimberley. Do you have a video explaining 'GROUPING' ? When and how to use it on the dx machine and in CanvasWorkspace? I love your videos and all that you teach! ❤️
@PaperedChef4 жыл бұрын
Caroline, yes, it is a feature I showed in this video. You select your objects are group them. If you would like each step broken down for you even further, then, you can check out my courses. I have detailed courses on Udemy. You can sign up for them anytime and they never expire. Click on ScanNCut Courses. thepaperedchef.com
Can you show us how you set the machine to fill the page with continuous image on a 12x12 for instance I want circles etc.
@irinamelamud59304 жыл бұрын
Thank you for the presentation. One question, if you use deep blade to cut Mylar 4mil, what is the blade setting? Thank you.
@PaperedChef4 жыл бұрын
You are welcome Irina. Be sure to look in the description of my videos. That is where I share the settings and a lot more information. Here are the settings for the exact Mylar I used. I haven't tried many other types. ScanNCut2 CM350 Settings used for cutting Mylar Stencils Deep Cut Blade Depth = 4 Cut Speed = 2 Cut Pressure = 3
@courtneystwilighttreasures54282 жыл бұрын
Hi, Kim. I'm not sure which video(s) to watch to figure out my scan n cut issue. I want to cut a rectangle that is 5.25 x 4.0 inches, and inside that rectangle, I want to cut out 6 small squares, equally spaced within the rectangle. HELP?
@PaperedChef2 жыл бұрын
You will want to check out my Canvas Workspace A to Z course because I cover alignment and so much more. Here are the intro videos to all of my courses. thepaperedchef.com/brother-scanncut-courses
@MrGylsen4 жыл бұрын
Hi Kim, great video as per usual, I have the old version cm900, think you was saying that you was going to give us the settings for cutting Mylar using the CM range? Not sure you had a link or going to do other video on this subject, thanks 😊 jake
@PaperedChef4 жыл бұрын
Jayc, thanks for watching. I did include the settings for cutting Mylar in the description. There are also links to related tutorials I created with the CM350. For the CM models, I used the Deep Cut blade for cutting Mylar.
@doloresfarr66812 жыл бұрын
I did this today. It came out well. I wonder if the auto cut pressure would work better than 7. It had to cut twice and I still had to twist off some of the 'stars'. I will try on my next stencil. Also, I am trying to create a checkerboard stencil. Help!
@PaperedChef2 жыл бұрын
Thanks for watching Dolores. You can give it a try and experiment and take notes. Each machine has a personality and the settings vary slightly.
@zinc4382 жыл бұрын
Hi, which is the recommended thickness? I have a Brother scanncut sdx225
@amna_dhanani3 жыл бұрын
Thank you so much!!!
@norinemueller45884 жыл бұрын
Your videos are always so awesome thank you Does the machine automatically do a double cut or is there a setting that you can press to do 1 pass
@PaperedChef4 жыл бұрын
Norine, thanks for your comment. Because the Autoblade is used, it determined the depth and thinks it needs to do another cut. I am not sure if I can outsmart it any other way. I wish I had a manual blade for this machine.
@moniquemustard26082 жыл бұрын
I was wondering the same thing and thought perhaps if you don’t set the cut pressure so high it wouldn’t feel the need to make two passes. Or do I have that backwards?
@lindaavinou64863 жыл бұрын
Hi, I'm a scan'n'cut novice I have just bought the basic CM300 machine and wondered if there is a way to make an age card where the actual number is the card back and front?
@vickispicer63384 жыл бұрын
Congratulations! Thank you so much for this video. Can you do a video showing how to make a stencil using words with the CM350? I need to make a stencil for my hubby’s tools with his name on the tools. Can it be done with the CM350? Would love if you could do a video on that, as you are so informative and easy to follow.
@PaperedChef4 жыл бұрын
Vicki, you have to keep in mind that letters are going to look funny with a stencil. I usually don't ever use stencils for this purpose. You are much better off using vinyl and transfer tape. Then, you take off the part you want to use for a stencil. I have lots of tutorials on cutting vinyl. kzbin.info/www/bejne/jZqypWxtlJKtps0
@vickispicer63384 жыл бұрын
Papered Chef thank you so much. I will watch this video. As i would much rather use my CM350 than my silhouette cameo. My CM350 is so much easier to use with all your wonderful videos. My hubby really wants a stencil so he can put his names on his tools for work, and the videos i have watched using my silhouette cameo make it look so complicated.Thank you for all you do. I so enjoy your videos.
@kelleyoneal25784 жыл бұрын
Are there different thicknesses of mylar sheets and what other materials could be used for making stencils that will hold up over time with repeated use? I plan on getting the Brother Scan N Cut in a couple of months (DX125). Thanks for all your tutorials on using a cutting machine. Do I need a special separate blade for cutting through mylar?
@PaperedChef4 жыл бұрын
HI Kelley, Oh YES, there are so many thicknesses of Mylar. Things like Portfolio Covers are too thick, but I tried them too. I recommend Mylar because it is easy to wash. If you have the CM model like this, you need a deep cut blade. If not, just use the Autoblade with the SDX. CM350E: amzn.to/2E9pZ5M Brother ScanNCut Deep Cut Blade amzn.to/2mKB0P3 Brother ScanNCut Deep Cut Blade Holder amzn.to/2NQmeC3
@jennieceguevara44624 жыл бұрын
Can I create stencils on a 350 BROTHER scan n Cut machine? I never thought of making our own stencils. Thank You for the tutorial. I want to try it. Where do you get the mylar?
@PaperedChef4 жыл бұрын
Jenniece, oh YES, of course you can create the stencils with the CM350. Here is one of my tutorials on that. kzbin.info/www/bejne/ZovKdZh5o9N2naM Here is a link to the Mylar sheets I use: Mylar Stencil Sheets: amzn.to/3f0sp43
@CmdrMartinThompson10 ай бұрын
We just got a SDX1250 and was wondering, how long do the mats and knives generally last? The machine came with a standard and a light sticky mat and i wonder do we need to get a spare one? Same for the autoknife, how is your experience with this?
@PaperedChef10 ай бұрын
Congrats! It all depends on how often you cut. Mats need replacing before blades. Here’s a link. Just watch my maintenance tutorials to get a longer life from your blade. amzn.to/3HjKLxb
@lynnblanchard88563 жыл бұрын
so If I buy the deep cut blade holder, is there also a blade included or can I use the blade that i have.. i guess the auto blade.
@juliel62543 жыл бұрын
Thanks for the great tutorial and information! I am new to your channel and really appreciate all your expertise. I noticed that your Amazon link to the stencil material is for 7 mil thickness . Is this the thickest mylar / stencil material the SNC SDX125E can cut?
@PaperedChef3 жыл бұрын
Thanks for the sub! Julie, that is the thickest I have tried. I think if you go any higher up while you are sponge coloring, you are not going to be able to get very close to the edges. If you want if for something else, try the thicker one. Give it a try. There are specs you can check on the Brother site but there is no substitute for experimentation.
@juliel62543 жыл бұрын
@@PaperedChef Thanks! I was thinking in terms of using texture paste and it's always easier with a little thicker stencil.
@lindapauline44493 жыл бұрын
What is the product called we are to use ,and where to buy ,thank you from Aussie
@PaperedChef3 жыл бұрын
Linda, the material I used was Mylar. Here is the link to it. It is also in the description of this video. Mylar Stencil Sheets: amzn.to/2GExvTI
@mylittlegardenplace28324 жыл бұрын
Is this a good machine for a beginner?
@PaperedChef4 жыл бұрын
Oh yes, of course. This would make a fine holiday present for yourself. Here is my link for when you are ready to make a purchase. Brother ScanNCut DX, SDX125: amzn.to/2X3HiKw
@kelleyoneal25783 жыл бұрын
I created some stencils in canvas workspace. Can I cut Mylar with standard blade if I adjust cut speed and cut pressure?
@PaperedChef3 жыл бұрын
This video was featuring the SDX125 and for that, I used the Standard Blade. If you are cutting stencils with the CM models, you can use the Deep Cut blade. Here is a tutorial on that. kzbin.info/www/bejne/rKGmgIZ9Z9WVaMU
@DebadooCreates4 жыл бұрын
Thanks so much for this! I've been looking at mylar sheets on Amazon but wasn't really sure which ones to get as far as the thickness. And I definitely wanted to sort of semi-transparent white instead of clear. And also the speed and cut pressure and all that kind of stuff. I do have a question. I'd like to make one with hearts but have every other line of the hearts offset. Is there a way to do that or would it just be a nightmare trying to do every line and offsetting every other line? I have the dx125
@PaperedChef4 жыл бұрын
Thanks Debadoo. You can add offsets to as many hearts as you want. You just wouldn't use the process I showed. That is because when you use a Pattern Interval, all of the items have to be the same. You can add hearts, duplicate them, add offsets to some, etc. but then you can use the Auto Layout feature to fit everything on the mat.
@DebadooCreates4 жыл бұрын
@@PaperedChef Thanks! I haven't really gotten to play with my machine much due to lack of space to set it up, but it's good to know that I can do that.
@susanturner41292 жыл бұрын
How do u understand the bridges, that need to hold the design together. This is where I mess up . Thank you
@ritamontero1328Ай бұрын
Chef, I believe I’ve asked before, but I haven’t heard from you, I know you’re so busy & probably just haven’t had the time, I apologize. Do you have, or does someone have a layout of all the ScanNcut icons with their names & or something that tells what they do?
@brandonfleming6754 жыл бұрын
Just have a quick question that you may have answered in the video. What is the thickest Mylar this machine can cut through??
@PaperedChef4 жыл бұрын
Not sure what the thickest is but I’ve cut 7mm no problem. Use a Deep Cut Blade with CM models.
@Cards4Cancer4 жыл бұрын
Do you have a link for the deep cut blade? I would like for you to get a commission off my purchase.
@PaperedChef4 жыл бұрын
Thanks Karla, you can use any links to Amazon and then search for other items. Here are the exact links. This is for the CM models. You don't need a Deep Cut Blade if you have Autoblade. • Brother ScanNCut Deep Cut Blade Holder: amzn.to/2VyKekI • Brother ScanNCut Deep Cut Blade: amzn.to/2DBKR2q
@Cards4Cancer4 жыл бұрын
Thanks Amy, I knew how to look for it on Amazon, I just wanted to give you the affiliate tip. Thank you so much. Will you have your latest class on sale soon? On disability my money is a lot tighter than it used to be. Gotta take advantage of the sales. I really learned so much from the previous classes.
@bellissimoa4 жыл бұрын
Wonderful tutorial! I am not finding the link to the mylar or settings. Maybe a screenshot?
@PaperedChef4 жыл бұрын
Anne, you are fast and one step ahead of me. I am writing the description now. Here is a link to the one I used. I bought a large pack of these and use them all of the time. Mylar Stencil Sheets: amzn.to/3f0sp43
@TheGooseNibble3 жыл бұрын
I enjoy what I did learn from your video, but it was obvious you didn't think it through before you made it. There was WAY TOO MUCH repeating. Also, if you aren't using an item in the video you shouldn't mention in your tutorial. I am just criticing the video, not saying it was bad, but it was hard to watch. You could have gotten you tutorial into 30 mins if you would stay focused on what you are explaining. I don't usually watch tutorials over 30 minutes, but I just purchased the new scan and cut and wanted a few pointers. Like I said what you were trying to create in your tutorial was good, but it was too helicoptery. But thank you for they lesson. I did learn something.