Paracord axe handle wrap- 3 bight turk's head

[@pauldowd9808]

Easily ,the best paracord how-to video ever -it’s a safe bet that I have watched it more than anyone ,ever

[@T3CHKOMMIE]

I had a much easier time following this wrap than the pineapple knot flash light wrap. This turned out GREAT on flashlight. thank you for putting this up!!

[@jtsoutdoorsandmore8136]

Great video bro . one tip if you want your wrap to be more permanent you can tighten your wrap by dipping it in boiling water for a few seconds . it tightens your wrap and insures it will never come loose . I've used that trick on knife wraps and the cord has yet to come loose .

[@FireFighter0254]

Dipping in the water after the project is complete correct?

[@user-pn7wq9cl1g]

BROOOOOOOOOOOO if only it didn't wreck un-lacquered wood to dip it like that... I need something glueless like this for my nunchaku collection ;-;

[@jontyplumeray4515]

Great tutorial. You have explained the process in very easy to follow instructions.

[@Paracordguild]

Hey! Thank you for your kind comment! Mark

[@cobaltusa]

Great video it was helpful. I got a laugh from the go outside and hit a brick comment. Great work thank you

[@clarkeugene5727]

Terrific demonstration with easy detailed steps. Now all I have to do is choose the colors that I prefer. Yours is nice, I will probably go with it too.

[@Paracordguild]

Hey! Thank you for your kind comment! Many colors go with this tan color. It really is handy. Mark

[@jakestyles002]

Thank you great vid, my Fiskers came out great! 👍

[@user-pn7wq9cl1g]

"the first thing you're going to need, is an axe" Instructions unclear, now my nunchucks look swagful as sin.

[@andrewgardner3372]

Can you do a video on dulling the blade like how to dull it on a brick so I can't cut my self. I tried and still cut my self. Please help.

[@sebastianb3231]

Thank you very much for this good tutorial. The only part that i‘m missing is how to finish the knot. Where should i cut the cords and do you melt them with a lither or only tuck them unter the knot?

[@sarahfigueira5621]

How do you tighten the wrap at the end and secure the other ends?

[@baroneb5043]

" go outside & hit some bricks with ur blade " 😂😂😂😂😂😂

[@henrymurrell5983]

Hello There how long did it take you to get this down pack😅

[@drewlee9870]

The video tutorial is great other than one particular vital step you leave out. That step specifically being where the second pass to create the overlay of 2 strands all the way through, instructions and illustration of needing and using a long cord to create the strand overlay should be included in the video. I understand, after watching the video multiple times, one could connect the dots to do so, but if following instructions at first glance only, then it certainly causes some confusion and in my case, misstep. Which unfortunately, has resulted on me cutting myself short or rather the cord on that particular pass. So, please, be 100% thorough. If you're going to take the time to make a long tutorial, one might as well cover all steps.

[@alijokar921]

دادا چی میزنی اینقد طومور مینویسی ، جنستو به مام معرفی کنD:

[@valeriynaoumenko9101]

Greatings from Kyiv, UKR! Thanks a lot for videos! Could you please make some handle wraps for katana swords in paracord and leather lines in Japanese traditions and the most practical ones which are applicable for katanas. This can be separate videos i.e. "Katana"..... The have been making lots of wrappings.

[@grantrogan9091]

thanks im always keen to see your videos

[@EDC3DP]

How do you do the end! It was the whole reason I clicked on this video and it was never shown!!

[@darkdruid83]

I've been looking for a wrap vid for my axe and had given up. This is perfect, Thank you. BUT! Hit bricks with an axe?! just use a heap of tape and cardboard.

[@Paracordguild]

Hey! Thank you for the comment! I hope the wrap will work well for you! The brick part was a joke :). Mark

[@peterhayes3040]

BoneHole lmao!!

[@eddieochs3416]

Can this knot be widened to make it 14" or 15".

[@DilgeerJan]

I am loving you voice. XD. dont need to know this wrap but listening. lol

[@tigerpilz1]

did you work with that handle? i am scary, that if you work hard, the wrap will slide out...

[@jonanderson4280]

Beautiful!

[@adamburns8780]

So just to be crystal clear. You removed the inner cord for all three strands in this particular video correct?

[@najeyrifai293]

Just a comment to remind myself I'm at the 15 minutes mark

[@decembersnedecor5434]

I FINALLY DID IT!!

[@atlas_1958]

Can you do a video on how to make the lanyard?

[@Paracordguild]

Hey there! There is one available here: kzbin.info/www/bejne/goi0iZl_htCEhqc Mark

[@djalals.moharrer5510]

In the end, you did not show how to tighten the Paradors?!🤨🤔

[@anabarbarasantos3305]

Magnífico ,belíssimo, esplêndido, maravilhoso.

[@noteworthy227]

"Go out and hit some bricks to dull the axe" 😅😂😂😂😂 ooooook?

[@noteworthy227]

Solid info otherwise 👌

[@trijuniarto]

Is it possible to make that with 3 strands at 1 time? If its possible, please make the tutorial. Thank you

[@HBrsz]

Why did you not show the finishing of the ends? After it was done you only showed the other side... How do we cut the ends and hide it neatly??

[@keithlapere7650]

3/4 of the way through step by step was excellent then jumps right to the end! :/

[@duncanoxburry612]

Super et magnifique

[@kennethehockenberry6754]

Excellent tutorial video Mark... I'm always thrilled whenever you post a new video... I have a couple of question but I'll ask you in messenger... Kenn

[@keithk6752]

Did he say hit some bricks to dull the blade to prevent injury?? Lol, just put a sheath on it!

[@camelwides2003]

Where do you find those flattened lacing kneeled ? I’ve looked everywhere

[@c.r.1005]

That is a Jumbo Long Perma-Lok lacing needle available from Tandy Leather or Amazon.

[@c.r.1005]

I should add that ONLY the Jumbo Long size has the flattened tip. The other sizes are rounded.

[@thedutchman8793]

A few hours to resharpen?! Only takes me 20-30 minutes tops and I only use two files and sand paper to sharpen my ax

[@Paracordguild]

It was a joke :)

[@MrBlack751]

What determines the initial over under sequence for these knots, I can not find any useful info on this so I'm stuck doing knots I can follow, such as yours.

[@Paracordguild]

Hey there! Well basically, it depends on what knot you are going for. For knots with an odd number of bights, such as this one, you have to start your over-under sequence a bit sooner than with the even number of bights. So when you tie a 3 bight TH you start the sequence sooner, since you need to lay the tracks to split earlier to reduce the number of bights. In a 4 bight TH you start the sequence a bit later so that you end up with 4 bights. If that makes sense :). Mark

[@BlindRambler]

That's actually a very straightforward answer. I really need to go back and re-watch the turkshead/herringbone series.

[@agustinvillalonmontoya356]

Soy. De mexico me gusta sus doseños pero hsbla demaciado diga lo que tenga que decir gracias

[@keithlapere7650]

Don't understand! You went step by step 3/4 of the way through your video. Then suddenly rushed the end! :/

[@diyar8252]

👍👍👍👍

[@alijokar921]

دادا از اعمال تاثیر گذارت دست بردار لطفا

[@jasongreen5159]

Did you really say hit bricks wIth it? Why would you do that? Mess up the axe then your expensive paracord wrap is useless.

[@Paracordguild]

Hehe, once in a while I throw a joke in there. I am sure anyone who appreciates a fine edge will think twice :). Mark

[@robertlangley258]

Jason Green .....damn Jason I thought I was the dumbest person watching this video. What you should have gleaned from what he was talking about was to “either” (magic word) cover the sharp edge of your hatchet “OR” dull it on, let’s say, on concrete, to help folks like yourself to NOT cut off their nose picking digits. Please don’t watch his videos about whipping Skippy (choking your chicken) so you won’t accidentally wack off your prized no. 1 digit. ......also Jason, don’t attempt this procedure “rope wrapping” on your prized digit as this will render you unable to produce children. 😰........oh yeah, you can resharpen hatchet after wrapping handle.

[@jasongreen5159]

@@robertlangley258 it's. OK Robert you can dull your axe on a brick. See sometimes people catch jokes, you on the other hand sit around looking to be clever. Now go use your brick.

[@julianoquintana651]

Show!!!

[@casestyer1166]

Choppy as fuck.