Rhino && Grasshopper 031 || Simple Folding Way

[@emmockladdie]

Excellent project - well executed. This 'problem' is a common request from our architecture students (Dundee University) - kinetic facades and the likes. Some very neat sub-routines in there, I picked up a few new 'tricks'. Thank you so much.

[@parastormlab4866]

Thanks 🙏 for your comment and you’re welcome 😉 join us via discord server here : discord.gg/4wcp2EJdm2

[@kummer45]

THIS IS a TRUE TESTAMENT of DATA TREE manipulation, set sorting, data matching and data grouping. This example covers A LOT of topics including actuator geometry, origami folding, modular compactness and surface construction of planar faces.

[@parastormlab4866]

Thanks for your comment and you’re welcome 😉and I’ll share your nice feedback once in parastorm Facebook group soon 👌

[@patriciac7688]

Thanks for this tutorial! It's big help for a school project. I was wondering what the steps would be to add a thickness to the surfaces? For example if I'd want this to be 2x4 wood studs forming the triangle (keeping the split surface for the empty center).

[@parastormlab4866]

Thanks so much for your comment it seems great ... and first of all you can do a thickness by using offset surface from pufferfish component or other wise by extrude it with normal vector direction ( perpendicular on surface) 🙃and for any problem you can join us via discord server here: discord.gg/UrxwQSknDN

[@patriciac7688]

@@parastormlab4866 awesome thank you I will give it a try.

[@patriciac7688]

@@parastormlab4866 Hi I sent you a message on discord

[@OanasiIonutTamas]

Thank you so much for the video! One question how can you rotate it so it lays horizontal not vertical?

[@parastormlab4866]

Thanks so much for your comment and yep you can rotate it from start and decide what plane you what to work with ... this algorithm built for doors folded 🙃

[@OanasiIonutTamas]

@@parastormlab4866 thank you, so if i already did it vertical i cannot change it now? need to start again?

[@parastormlab4866]

Hmmm I think that is well but if you want you can do that by not programmatic way by rotating final output product

[@khaoulaarchitecte1727]

bravo well done

[@parastormlab4866]

Thanks so much and you are welcome 🙏 🙃😉

[@adeerkhan1]

I am not able to get offset curve result (15:16) as yours, rather my offset moves at 90 along the plane, I have tried adding different planes, but they do not simulate when changing angle. Any solutions? Thanks

[@parastormlab4866]

Thanks for your comment and I don’t know what is going on but just apply steps one by one well and review more and more to know a mistake 🤔

[@adeerkhan1]

@@parastormlab4866 Thanks, I've solved it.

[@parastormlab4866]

Great 👍

[@aznviet93]

Hi, thank you so much for video! I have question, is there a way you can show the step to add the frame around the surface/facet? If you can help on that. Others than that, I’m grateful for your sharing

[@parastormlab4866]

Thanks so much for your comment 😉 and you’re welcome.. yep for sure I’ll help you definitely you can create frames by scaling triangle surfaces with central points then trimming between these bigger and smaller parts finally separate the frame part via list item component ..that’s it 🤓

[@nadineahmed9214]

Join curve function in rehino8 can not have two inputs

[@parastormlab4866]

Join us via discord server to be able to understanding well 😄 here our server : discord.com/invite/8xxZJ82SuZ

[@erenvardar9677]

When I connected End Points at 2:38, there is always two lines with mirrored, not like in the video. How can I solve that?

[@parastormlab4866]

Thanks for your comment! And you should to connect a right End point from Rotated line then choose a z plane originated from end point 🧐

[@erenvardar9677]

@@parastormlab4866 Thanks a lot! You've been so helpful for my school project

[@parastormlab4866]

Good to hear that and you’re welcome 😉

[@reginaklippenstein2332]

Hi, trank you for the Tutorial. I was able to follow the steps very well. I have also a question. Is there a way to multiply the construction upwards ? I tried it but Don‘t find a way without losing the other options to change the parameters of the construction. Best regards from germany 😊

[@parastormlab4866]

Thanks so much for your comment and you’re welcome 😉.. so you mean to multiple folded units on Z axe without losing any parameter? If I understood I’ll send you an update soon as possible 🤓

[@parastormlab4866]

Any problem you can join us via discord server here: discord.gg/UrxwQSknDN

[@reginaklippenstein2332]

@@parastormlab4866 trank you for answering so fast 😍 yes that was the question. That would be so nice. Thank you! I will try is with the discord Server. Never did that before 😄

[@parastormlab4866]

Big welcome to Germany 🇩🇪

[@SteveBurgerman]

Could you provide the script? I am having trouble with the mirroring, it will not show the points on the mirrored side. Thanks

[@SteveBurgerman]

It wont read point 4 or point 5

[@parastormlab4866]

Please check your discord inbox

[@StoneNayoung]

Would it be possible to provide a download link for the final project to this?

[@parastormlab4866]

Yep for sure... just join us in discord server here: discord.gg/rgBZdVP9

[@nadineahmed9214]

I joined discord but I'm unable to send message for the script

[@paoladiaz5237]

This tutorial is amazing thanks. Is there anyway i can find the point to make a Z array? Ive been trying with a couple commands and could not figure it out.. Anyways this is so good thanks for sharing

[@parastormlab4866]

Hey thanks for your comment and you’re welcome 😉..yep you can do that just get a height distance for main cell 🧐

[@hakankosebas2085]

can you do flasher origami with same mechanics? I mean in a simple way, without solver

[@parastormlab4866]

If you mean without kangaroo 🦘 ?? I think yes but it takes more long steps 🧐

[@hakankosebas2085]

@@parastormlab4866 yes, I wanna build one in geometry nodes but don't know the way

[@denizdemir9325]

after list item command ,what are you doing with boundary surfaces and surface split ? I mean what is the command ? Cause I followed each step and I managed it until that step .Please help me :)

[@parastormlab4866]

Hey ☺️ thanks for your comment so 🤔 you have to double check ✅ your steps I think you got missed something

[@parastormlab4866]

join us via discord server here to be able to receive my slution discord.com/invite/RWAKaqrfEF

[@destinywork9113]

Hey! Im an architecture student and I was wondering if I could get the script for this simple folding for a project i'm working on ?

[@parastormlab4866]

Thanks for your comment 🙃 and so I’ll share it soon just join us on discord server here: discord.gg/TrxUxGSuHu

[@Jasminekalambayi]

hey ...I tried joining the discord server and I did but I can't access the chat. I have rhino 8 and I'm unable to get the second pt. someone please help(from a struggling architecture student :( )

[@parastormlab4866]

Hello 🤗 you're welcome so try this link and join lobby room discord.com/invite/xVSuJxu9TH

[@parastormlab4866]

Or you can send me privately

[@haimingwang819]

The definition is nice, but this is pseudo folding I’d say. The creased surfaces shouldn’t change their surface areas while folding.

[@parastormlab4866]

Thanks for your comment and so it’s great for Door folding not any surface 🙃

[@rabidinouri9390]

sup

[@parastormlab4866]

Try this also kzbin.info/www/bejne/jXObe3yGapJ9mNE

[@flos_wo.o]

Would it be possible to provide a download link for the final project to this?

[@parastormlab4866]

For sure send me a message via discord server discord.gg/TrxUxGSuHu