Parking Stall Asphalt Repair with Bobcat & Dump Trailer

[@massfusion2]

Just shared and posted this on Facebook. I don't do what you do, but we are hard working Americans. You totally have my respect. We travel and Always see the cones and heavy equipment. But never pay any mind to what they actually do. We sit around and make Jokes about it. But in reality? These guys need a thumbs up. They have a very hard job that isn't easy. These are the guys that make our roadways and repair those roadways, so we can travel safely and comfortably. Hard work and sweat. While we're in air conditioning? These guys are in the asphalt and heat all day! If ever a New observance day should be made? It would have my vote! That roadworkers and bridgeworkers should have a day of observance to respect what they do. So next time you're frustrated at traffic because of road work? Remember the hard working American that works in the heat all day to make a road to travel!

[@customerservice95]

That was a great idea to spray down your equipment and bucket to keep asphalt from sticking. and the fact that you did it in the work area so the new asphalt wouldn't stick to the old what's a genius move.

[@JeffLepard]

Yes absolutely! Otherwise that asphalt sticks to everything making work impossible or hard to do! Thanks so much for watching!

[@robertbarrios480]

You the bob cat to bring the asphalt to level no need to use that many tools

[@nicholaskarnani3182]

Excellent job Jeff very professional and very detailed

[@JeffLepard]

Thanks for watching the video I appreciate it! Sorry for the late reply I was travelling out of the Country for 2 months.

[@comelon3]

Jeff, you look all jobs look easy! Fantastic video I enjoyed a lot Greetings from Austin Texas

[@ndleinahaystack]

Good video's but please stop saying (ash)phalt. It's asphalt

[@JeffLepard]

ndleinahaystack all my new videos I have the correct pronunciation! 😉

[@briangardiner1015]

It is a Canadian thing.

[@NachoMan626]

in the US we pronounce it as ass-falt

[@theovanderven9388]

Deze kerel is niet goed om zonder enige beschermingsmaterialen te gaan zagen !

[@JeffLepard]

My newer videos I am always wearing PPE.

[@massfusion2]

You have a fan here. Wish you luck and prosperity. You love what you do

[@briangardiner1015]

Was this going to be sealed in the near future? If it was a long term fix it should have had tack put on the edges and existing asphalt. Another thing that could have been done was milling the asphalt then patch.

[@JeffLepard]

They were paving that section later on after. Yes tack coat is great to bond you can see me using that on my new channel: kzbin.info/door/E4x9dzt-NuHwlEDuAdC2kQ Milling would work as well but this was just a small job.

[@1230richboy]

If you grinded or milled the asphalt , you would of made that job even smaller and made the same type of quick repair.. Two 4' by 4' patches, just to cover the oil spots. Maybe just one of your bobcat scoops of asphalt with a 3/8 rock would of covered it.

[@MrVadims14]

Good work brother. I just did a asphalt patch just like this with a bobcat m371 down here in Sputh carolina, do alot of sealcoating also Good channel, keep it up.

[@chrisrayner1775]

Chalk line helps cut a straight line makes job look way better

[@JeffLepard]

Yes for sure and on larger cuts i'm using my floor saw with cuts straight.

[@smokeeater695]

Do you spray any water, in addition to what comes out of the tamper?

[@donaldkwren]

Another cool video thanks man!!

[@robertbarrios480]

How do you expect the new asphalt to stick to the existing surface? You need to tack the edges and surface . Also why are you rough raking it , your brining up the rock by doing that

[@TravelFun69]

Love the video! Keep up the good work!

[@JeffLepard]

Thank you for watching!

[@massfusion2]

Just came across your subscription. Great videos and exceptional knowledge. Always wondered how the pros did this kinda stuff. Thanks.

[@JeffLepard]

Thanks very much! We just started making videos a few months ago. Releasing 1 video per week. We've got lots of different videos coming up soon as well as some other "Do it yourself" projects.

[@LUTHERJ304]

Ok. Well. The little oil stain turned into 3 parking spots tire track marked up stain. With almost a full new spot. Get a heater blower. Reuse that still decent asphault just sturr it up. No cuts

[@JeffLepard]

Infrared Heaters are amazing and they do save time! I'm actually getting one this season! Thanks so much for watching!

[@NachoMan626]

@@JeffLepard please have videos of it

[@milanfilipovic9105]

What did you spray your equipment with? I was told to spray with diesel but trying to see if there’s a better way

[@mikel9567]

You didn't fix the problem though, you only put a bandaid on it. That oil seeped through all the asphalt as made clear by the large stain shown after you excavated. Oil doesn't stick to asphalt. Unless you cleaned and sealed that oil, the asphalt you put down will start showing damage in the same spot.

[@JeffLepard]

The base wasn't too bad it's been over 2 years and it's still fine. They will be paving the entire lot soon. I've seen some oil go right through both layers and soaked into the granular which all had to be excavated.

[@garymatusavige3639]

How many ton can you do alone

[@anthonystanley3392]

Why you did Sweep the edge before compacting

[@jeffbrown4400]

Great video! Thx

[@JeffLepard]

Thanks so much for watching I appreciate it!

[@leo6251976]

great videos!!!

[@JeffLepard]

Leonardo Jimenez Thanks so much! We be filming new 2018 videos within the next 2 weeks and uploading. I will be making even better videos! Thanks for the support!

[@hugoaparecida9095]

What is the name of the product that you spray on the tools for the asphalt not to stick? Great job

[@delreypaving2128]

Hi jeff... love your videos...but why you never use a roller ...for these jobs...

[@JeffLepard]

This season coming up I will be filming the use of our roller! Thanks!

[@bestasphalt]

NO EYE OR EAR PROTECTION!!!!!!!!

[@JeffLepard]

+Ronnie Waters in my old videos i didnt show myself wearing them. The new videos ive done i do wear it! Good observation! Thanks for watching my videos!

[@MrJaysnuff]

How many tons can that dump trailer carry

[@JeffLepard]

That dump trailer can carry 4 tons legally it can hold 6-7 tons.

[@oscar.gonzalez]

How does long term oil on asphalt damage it. It looks more unslighlty. Really enjoy your videos!

[@JeffLepard]

Oscar Gonzalez the oil breaks down the properties in the asphalt. Gas is the most harmful to Asphalt. It eats through the asphalt cement and turns the asphalt into slushy rocks.

[@GrayslakeandGurneeIL]

Awesome videos I'm looking to getting in this business of seal coating and patching how do you know how deep to go when using the saw ? Thanks

[@JeffLepard]

Unless there is a pot hole or some way of seeing how deep the asphalt is you don't really know. Normally we just sink the saw all the way down. This way you won't have to re-cut if you are not deep enough. If you are running a walking behind saw I normally cut 5-6" down to be sure.

[@garymatusavige3639]

If you use water on big saw you will see color of mudd when your in dirt

[@headhunter4525]

Liked👍

[@bossanovaross4628]

What do you spray your tools and the bobcat down with an order to prevent the asphalt from sticking?

[@JeffLepard]

BossaNova Ross you can use Diesel or a solution that is at the asphalt plants the truckers use. Diesel works the best though.

[@bossanovaross4628]

Thank you Jeff. I really like your videos. You're greatly appreciated 100%

[@JeffLepard]

BossaNova Ross Thanks so much. This coming season my videos should be even better. Thanks for the support!

[@bossanovaross4628]

Jeff Lepard You Rock. Keep it up!

[@greysonvalleyrrbarnesville152]

We used to use Diesel, Not any more. Go to Dollar general and get the Cheap PAM spray they carry. We spray in our Hot Box and tools. Way better than Diesel It is good to 500 degrees. (and you can eat it too). Yes it it a few dollars more than Diesel but works like nothing I ever seen.

[@chrisrayner1775]

Ashphalt man

[@JeffLepard]

Lots of my videos I had the wrong pronunciation. Only on my new channel all of the videos are correct!

[@joelang9796]

More silica hope you don’t get cancer every video cutting with no dust control makes me sick

[@cholland3440]

What is the long rake type tool called that you use

[@JeffLepard]

That is a lute rake. Excellent reach on them!

[@cholland3440]

Lute rake or take?

[@JeffLepard]

Rake auto correct. lol

[@cholland3440]

@@JeffLepard thanks, lovin your videos

[@JeffLepard]

@@cholland3440 Thanks so much for the support. Lots of better videos coming for the new season!

[@youngstunt1891]

Why not just pressure wash?

[@jeagle64]

You said asphalt way too many times. Lol

[@JeffLepard]

I noticed I did that but in my newer videos I realize that haha

[@kingbmontana6542]

Nice video man I’m curious how much would you charge for a job like this?

[@JeffLepard]

Something like this you can charge anywhere between $1200-$2000 Canadian approx.

[@kingbmontana6542]

Jeff Lepard thanks bro your videos are amazing great work

[@JeffLepard]

@@kingbmontana6542 Thanks so much. I'm going to be putting my construction videos on a new channel very shortly. I will make the announcement soon. I will still be using this channel but only my construction videos will go on my other channel. Thanks for the support.

[@chrisrayner1775]

Sometimes I think your doin it on purpose. Ashphalt Ashphalt Ashalt

[@JeffLepard]

Yeah that was the old way I use to pronounce it all the time. I'm not correctly pronouncing that right on my new channel.

[@robertbarrios480]

Lol why you using the shovel to edge it , use your rake man come on it’s common sense