New Asphalt Speed Bump Installation

Рет қаралды 17,742

Jeff Lepard

Күн бұрын

Пікірлер: 36

@JeffLepard 5 жыл бұрын

New Speed Bump and other videos on my new DO IT ALL SEALING channel: kzbin.info/door/E4x9dzt-NuHwlEDuAdC2kQ

@ncameron7 6 жыл бұрын

Good video! 1. How did you know the restrictions or limitations/requirements for design of speed bump? 2. What brand and type of paint did you use on the asphalt? 3. What was the rough cost to the customer to perform this or how did you charge (total not to exceed or?)?

@JeffLepard 6 жыл бұрын

Good Questions! 1- The client wanted something that would slow down the vehicles speeding through but not too high where it will damage cars. We installed the speed bumps at approx. 3-4" in height. We normally do them in widths of 2-3'. If the client wants them wider than it would be more of a speed hump which I will film and post those as well soon. 2 - The paint I am using is from Sherwin Williams "Set Fast". There is Oil Based Paints, Water Based Paints and Promar Paint with Low VOC. 3 - When charging clients for these it all depends on the quantity you are doing. If i was doing only 1 speed bump like this it would normally be a minimum charge $1000-$1200. We installed 8 double speed bumps around this complex so a good price would be approx. $800 each double speed bump.

@JeffLepard 5 жыл бұрын

I started a new DO IT ALL SEALING channel: kzbin.info/door/E4x9dzt-NuHwlEDuAdC2kQ

@victorubiano Жыл бұрын

Thanks you. From Bogotá, Colombia, Sud América. Pintuviar company

@TravelFun69 5 жыл бұрын

Can you install speed bumps without cutting the existing asphalt?

@JeffLepard 5 жыл бұрын

Its not a good idea to do that because in the winter the plows with take the speed bumps out.

@tedtederson9411 9 ай бұрын

Nicely done. Where do you get your ashphalt?

@JeffLepard 9 ай бұрын

Usually at Crupi, G.I.P. or Forest. Thanks for watching!

@debbieguthrie317 6 жыл бұрын

It is my old complex! What a small world!

@JeffLepard 6 жыл бұрын

Debbie Guthrie crazy isn't it! We put speed bumps all over the complex and 1 convex mirror.

@camroberts1962 6 жыл бұрын

Hey Jeff! Just wondering about the prep work. Is putting fresh asphalt over top of existing asphalt just an adhesion issue? It would save a lot of labour to sawcut/remove.

@JeffLepard 6 жыл бұрын

+Cam Roberts thanjs for watching! So putting asphalt over existing asphakt for a speed bump may or may not last. Especially depending where you live and if you get any snow. The snow plows normally will tear into the speed bumps destroying them if they are capped on top. Whenever installing these speed bumps i always either tear out both layers of asphalt if there is or at least the top layer. I have some some speed bump repair work where i just added ss1 glue and capped on top and it worked fine.

@JeffLepard 5 жыл бұрын

I started a new DO IT ALL SEALING channel: kzbin.info/door/E4x9dzt-NuHwlEDuAdC2kQ

@LevonsWound 3 жыл бұрын

what brand of eye protection were you wearing, in particular when using the saw to cut the holes in the asphalt?

@wd2699 5 ай бұрын

What height is a good height for speed bump like this one?

@debbieguthrie317 6 жыл бұрын

I feel like that is my old complex....where did you film this?

@CamerieriZeppoleMix Жыл бұрын

How to REMOVE a Speed bump??? Please do a video on that ❤

@ladarrienwilliams340 5 жыл бұрын

Hey brother what kind of paint do you use to paint the speed bump?

@JeffLepard 5 жыл бұрын

I use Sherwin Williams Paint Set Fast A303 Oil Based.

@MrJaysnuff 6 жыл бұрын

I’ve been enjoying your videos! Anyway you can make a video on asphalt curbs?

@JeffLepard 6 жыл бұрын

Jeremy Diaz the next time I have to make asphalt curbs I certainly will! Thanks!

@JeffLepard 5 жыл бұрын

I started a new DO IT ALL SEALING channel: kzbin.info/door/E4x9dzt-NuHwlEDuAdC2kQ

@NateVlog1 6 жыл бұрын

U legit know how to do everything

@Briebabcock8052 6 жыл бұрын

I see that you got yourself a dump truck. Or is that a rental?

@JeffLepard 6 жыл бұрын

Stephenie Grenoble I picked up that dump truck years ago I never had it around while I was filming in the past. This year we are using it all the time.

@Briebabcock8052 6 жыл бұрын

Jeff Lepard Ah, okay. Well, as a viewer (goota catch up on your other videos, put your truck in more. And maybe do a walk around and start up.?

@JeffLepard 6 жыл бұрын

Stephenie Grenoble thanks for the tip! I will do that. Thanks for watching my videos! Appreciate all the support!

@JeffLepard 5 жыл бұрын

I started a new DO IT ALL SEALING channel: kzbin.info/door/E4x9dzt-NuHwlEDuAdC2kQ

@es-qf2gw 4 жыл бұрын

Speed Bumps never work and always a waste of money because you can always change out your suspenion system to a compensate for the speed bump (bigger tires work wonders on speed bumps).

@user-pz1bc9bc6o 4 жыл бұрын

Hehehehehe, your killing me ! lol... why did you cut it out and remove it, the existing pavement was in good condition , key way and emulsify it and pave it, less time and less work and more effective, and it could be a little wider with lower crown, you want to slow them down not hurt them. it's still good , I like it. your way works, Kudos...

@JeffLepard 4 жыл бұрын

Yes that would work as well you can do that I've done those before that way. Most of the guys here do it this way even after fully paving a new parking lot the speed bumps are installed another day cutting that section out. Yup a wider / lower one we install speed humps we call them here. I will do a video on those as well as next season! Thanks so much for watching the videos I love hearing how different methods are done that's awesome!