PARKSIDE Problem Solved for The Smart Battery 8Ah 4Ah

[@CMCdiy]

Here you can see the products which i used in this video BMS for PAP 20 A1, PAP 20 A3 for Parkside 20V Team Power Tool Battery s.click.aliexpress.com/e/_DFi... Battery Capacity Test Power Level s.click.aliexpress.com/e/_DeD... Heatsink Plaster s.click.aliexpress.com/e/_Dcw... - Nickel tape s.click.aliexpress.com/e/_DEh...

[@orlatris96]

Olá amigo. Por favor diga-me se esta troca de bms, tem resultado bem? A bateria continua a funcionar bem? Obrigado

[@CMCdiy]

Hi my friend . It works perfectly, just like a classic 2-4Ah battery, only this one is 8Ah with a classic BMS plate, No SMART, and I think it is more durable. As the difference, the classic ones use 18650 cells and the Smart uses 21700 cells

[@Headcase0570]

I've recently purchased two 8Ah smart batteries but I keep running into an issue with them. I use both of them on the battery-powered grass mower (Parkside PRMA 40-Li C1 IAN420347). Intermittently, the mower will stop being powered by them. You can actually hear the mower blade speed ramping down a step before cut-off. Trying to start the mower again, it'll cut off within 3 seconds. Looking at the Parkside app, the batteries have 0 minutes runtime (despite having been used), aren't overheated (can confirm by touching?) and have a percentage remaining above 80%. Leaving the mower and batteries alone for some time will result in a longer period before cut-off again. I suspect either a thermal issue or bad cells.

[@wietse5575]

I have 2 4ah smart baterys with broken pcb do they not sell the original pcb somewhere?

[@igotbricotools2035]

I got one 4ah smart with same problem . Is there no original bms ? 🤔

[@CMCdiy]

The bms is original, but the bluetooth module remains active and its source burns out, damaging the whole bms

[@nikolaydodev]

Did you try to just reconnect the original BMS to the battery stack? Maybe disconnecting and reconnecting it will force to restart.

[@CMCdiy]

Hi, I tried this too, but without results, the same problem, the red and yellow leds are permanently on

[@TonyMontana-ke2kz]

what battery capacity test power level to choose? "5S lithium battery, full charge 21V" or?

[@aritani2883]

wow cool!!!! 🥰 thank you my friend 🙏your youtube channel good contents 👍 happy day 💓

[@CMCdiy]

Thanks my friend

[@06akif-bhv]

Gibt es eine Möglichkeit eine Spannungsanzeige zu installieren statt einer LED Anzeige. Ich würde gern wissen wieviel Volt der Akku noch hat.

[@FixitEasyDIY]

Good tip. Thank you 🙏

[@CMCdiy]

No problem 👍

[@ZENYOFFICIALCHANNEL]

Wow nice tutorial host I wish I know how about battery and electric thing hehehe

[@CMCdiy]

Thank you 😉🙃

[@greenseamussel8018]

Hi, this green-red LED is on problem I have found after refreshing the firmware. The blue line runs till the end during refreshing the firmware, but after it the app wrote: mistake during the refreshing. I do not want to replace the BMS to the 4 Ah old BMS, I want to reset the BMS somehow to use the battery as it was earlier. Can I do anything to reset it? Or how can I solve this problem without changing the BMS to an old 4 Ah battery BMS?

[@CMCdiy]

Hi I think the only solution is a new software, the battery if it is under warranty or not go to the authorized Parkside service for resetting

[@NoRoads2AllRoads]

Nice where can you get one of those 8Ah?

[@beeret110]

Send it back to lidl. You will get a fresh one that works, it pays to hold on to your receipt

[@alyvproduction]

Really interresting video CMC great job 👍

[@CMCdiy]

Thank you

[@olidevil6666]

Salut tu as pris exemple sur ma vidéo ou tu l.avais déjà fait avant ?

[@CMCdiy]

Hi Oli I started this project a long time ago but I didn't have time to edit it. Then when I searched for a title I also found you. You did a wonderful job and you are very dedicated in what you do.

[@olidevil6666]

@@CMCdiy j ai fais exactement la même chose avec le même affichage de niveau 🙂

[@CMCdiy]

I also saw the method with the burnt resistance. If I get another smart battery, I will study this solution. 🤗😉👍

[@orlatris96]

Excelente, obrigado

[@supriyo3610]

WONDERFUL Thank you 🙏

[@amerikanoss1]

WHERE DID YOU GET THE MEASURING INSTRUMENT I WANT TO GET A TEST METER

[@MrKopko2]

Smart batt Smart move Lidl make more money

[@marianslovak856]

How about unblocking that BMS instead of just using those batteries? You lost smart functions with this "repair" Here is the fix: kzbin.info/www/bejne/famVZmaeibipqas

[@davey2k12]

Well they still selling the crap battery's in the UK the jokers 😂😂

[@CMCdiy]

Cheap and,, VERY GOOD,, 😂😉

[@londoncity1]

Good tip. Thank you 🙏

[@CMCdiy]

Glad it was helpful!🤗