Part 1/5 Mercedes S-Class W220 Instrument Cluster Repair

[@changkelv]

Thank you so much!!! I was looking to fix my w215 instrument cluster lighting problem.

[@xXDragonTribalXx]

For all people in germany that want to try this, it's made by " VOGT ". you need to search for VOGT Transformer / Transformator and you'll get the piece. Price Ranges from 10 - 100 €. Depends where you buy and if it's original or china replacement. GL!

[@dargekko5041]

How do you remove the dial gauge?

[@mghaz]

thank you for this descriptive vid Ahmed

[@WaqasAhmed-kj8ue]

mghaz Glad, the notes were useful. Thanks

[@cspecwilspec1244]

+Waqas Ahmed I tried to look at your notes and wasn't able to. Do you have them uploaded somewhere?

[@chemistryboyzbcg]

You make great videos nice job

[@martinalbrossi]

muy buen trabajo . muy bien explicado. gracias.

[@JMBTV3]

Very Helpful, thanks for video!

[@thomasgross6849]

What are those 3 smd components what are between transformer secondary and lamp ? On it written 1A. Look like capacitors. What would be the value, because with multimeter does not show nothing

[@proman378]

hello, i purchased a used cl500 w215 the check engine light doesn't come on at all, i notice that that light will only come on from a signal of the ecu, i belive someone cut that wire to hide the codes the fact that the check engine light was on for codes. how do i find that ground or is there a fuse that can be disconnected. can you please point me in the right direction thx, enjoy the video.

[@rodneyhartwell4162]

Can you swap housing between the w215 and w220 with the internals?i have an s class cluster than I want to use in my cl and the s class shape is a little different.

[@turanhuseynli105]

Hi.there is no any warning sound on my cluster. How can i test it!?

[@mediacenter8167]

Hi, the needle on my 2000 S500 has started showing the wrong speed, The Crusie control shows the correct speed when you try to set it, so is this likely to be the Needle or the transformer?

[@remydelaney4113]

I have a question do you know how I could manipulate this cluster as I have bought one already

[@lauyip4379]

hello friend can I use ver.1 lcd to swap in ver.2 lcd display ?

[@zbychu6255]

Pomocne spróbujemy ?

[@IamFreeRu]

My middle screen is the one with the problem. How do I fix it. Some of the pixels are screwed up.?????

[@KMURRAY1841]

Hey pal Did you get an Answer on this?

[@ragnarlothbrok6324]

@@KMURRAY1841 did any of you ever get an answer? Lol

[@Bizija123]

How do you repair the center screen? It only works when warmed up.

[@WykkedDragon]

Same with mine

[@Bizija123]

@@WykkedDragon i repaired mine. Capacitor replacement. I made video kzbin.info/www/bejne/jXPbdJhnhNqgd6M

[@larrymcnair6249]

Same for me also

[@Bizija123]

@@larrymcnair6249 i fixed it by replacing the capacitors. I have a youtube vid on it if you're interested.

[@larrymcnair6249]

I think I just saw it. However if you can send the link, that will be nice.

[@tarzsan]

what is the transformer called? where can I buy it??

[@iftikharahmed3366]

very beneficial thanks

[@kingbojackson8822]

♡ it!

[@initialb5009]

looking at an s class with this fault. migh be able to get the price down a bit if i can fix this issue.

[@initialb5009]

looked so easy then got very hard. .. worth a go though.

[@teamus95N]

what is your email