No video

Part 1, Professional drywall finishing a Bad butt joint!

  Рет қаралды 5,019

Man with a Pan

Man with a Pan

Жыл бұрын

Пікірлер: 13
@ralphclay171
@ralphclay171 Жыл бұрын
Pretty slick man,no doubt you know what you're doing that butt joint looks good now,as a hanger for 33 year's I always tried to avoid breaking one like that but sometimes it does happen but I was taught to always hang it as if I was finishing it keep everything good and tight,put plugs in when it was out of square and you couldn't help but to have a gap but my ole buddy that taught me wasn't gonna leave a crack we plugged all of them so the finisher would have a better base to work with, just little things to help out the next man down the line like I see you do in your videos doesn't take that long to do a good job it will certainly keep you plenty of work great job bud
@manwithapan
@manwithapan Жыл бұрын
Thank you!
@darksidetraining9815
@darksidetraining9815 Жыл бұрын
Finishing my basement, pretty good until I got to the ceiling but joints lol. Your videos help a lot though thank you!
@manwithapan
@manwithapan Жыл бұрын
You’re welcome
@MarvelSnap59
@MarvelSnap59 Жыл бұрын
Salut l'ami,good job!
@manwithapan
@manwithapan Жыл бұрын
Thank you!
@adde32332
@adde32332 Жыл бұрын
On your next coat do you make it wider or is 12" on either side about as wide as you get for these bad joints?
@manwithapan
@manwithapan Жыл бұрын
I will go just a little bit wider, I believe there is another video of me skimming this exact but joint. If you get the full the first time, it shouldn’t take to much for second time.
@adde32332
@adde32332 Жыл бұрын
@@manwithapan thanks, I'll look for that video. Full as flat with the part that is rocking? So in this video like 3/4" of mud closest to where it's rocking?
@manwithapan
@manwithapan Жыл бұрын
@@adde32332 you have to leave mud on the outside of the tape so that the tape itself doesn’t make a speed bomb. That’s specific but joint there was no way to get completely flat but you can get it smooth from side to side without revealing the joint in the middle if you understand what I mean
@adde32332
@adde32332 Жыл бұрын
@@manwithapan yep, understood. thanks!
@johncaudle6703
@johncaudle6703 Жыл бұрын
How come you don't do like the others, use butt board, ( because they can't finish 🤫) lol....but I like your method and that is to define your self.....a finisher finishes drywall, period....👍 Enjoyed the video as always, have a great day
@manwithapan
@manwithapan Жыл бұрын
Thanks, We use butt board in big houses, this was a newer crew we have been trying out. This was a remodel house and the framing was 60 years old. Out of square and that ceiling had massive rolls in it.
How to finish Drywall “Flats and Butts” Second coat
8:59
Man with a Pan
Рет қаралды 19 М.
How to Float and Skim a Butt Joint (Where the Two Short Ends of the Sheet Meet)
7:55
Scott's Sheetrock Services
Рет қаралды 13 М.
The Joker saves Harley Quinn from drowning!#joker  #shorts
00:34
Untitled Joker
Рет қаралды 52 МЛН
Schoolboy - Часть 2
00:12
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 16 МЛН
I'm Excited To see If Kelly Can Meet This Challenge!
00:16
Mini Katana
Рет қаралды 33 МЛН
ROLLING DOWN
00:20
Natan por Aí
Рет қаралды 7 МЛН
How To Mud & Tape Drywall Butt Joints
13:07
HouseImprovements
Рет қаралды 2,5 МЛН
Fixing Cracks Part 2!
11:10
Man with a Pan
Рет қаралды 865
How to Mud Drywall THE WRONG WAY!!!!
10:29
Vancouver Carpenter
Рет қаралды 2,2 МЛН
Fixing a VERY BAD Drywall Job!!!
30:34
Vancouver Carpenter
Рет қаралды 223 М.
Tapetech 12” box, skimming bad butt joint.  Make them flat.
4:06
Man with a Pan
Рет қаралды 2,6 М.
10 Things about Mudding Drywall I wish I knew when I started!
22:22
Vancouver Carpenter
Рет қаралды 311 М.
Drywall Butt Joints By Hand
2:54
THE DRYWALL DOCTOR
Рет қаралды 4,5 М.
Drywall Mudding (first coat)
17:21
Vancouver Carpenter
Рет қаралды 182 М.
The Joker saves Harley Quinn from drowning!#joker  #shorts
00:34
Untitled Joker
Рет қаралды 52 МЛН