PART 2 DIY IPH BI-LED FOG LAMP SWITCH INSTALLATION FOR HIGH-LOW BEAM FUNCTIONALITY | M617

🔴Part 1 link= • PART 1 DIY IPH BI-LED ...
🔴switch link= boodmo.com/cat...
🔴IPH bi led m617 fog lamp available in 2 models single colour and multi colour 3 in 1 (coupon code "SHRINIVAS" for 1111rs off applicable on both the models) link= autosquads.in/...
🔴Multimeter (voltmeter) link= amzn.to/3FWRnAL
🔴Soldering iron kit link= amzn.to/40yjKP2
🔴Hot glue gun link= amzn.to/46auX9K

[@anand0294]

Perfect

[@user-km9br3yr1h]

Hi I installed the projectors with hid bulbs on baleno 2018 model. But hi beam works only with headlights. If you are from pune pls share address n guide fir proper wiring.

[@ShrinivasMore]

high beam with headlights means you got the high beam connection wire of the fog lamp in the headlights socket. You can follow the video instructions to get the switch for high beam and low beam it's little complicated because I am using the company fog lamp switch but it's worth it. I found a con in this setup although it has an individual switch for high low beam it's difficult to use or use can say it has no use . Now I am planning to change the wiring setup for example I will connect the fog lamp high beam with headlight high beam but I will add a switch in between so that I will get a benefit like if I am driving my car in city then I will turn off the switch resulting in only headlight high beam will work in city and when I am in the highway I will turn on the switch so that my fog light high beam works with headlight high beam

[@shubhamgorade4242]

Make a video on night drive on busy road and on dark patch

[@Rrocksstar]

Hello bhai, nice video, meri car may already stock fog lamps hai from company aur usme H27 bulb fit hota hai aur maine halogen/led dono use kiya hai without any issue. Abi mai m617 tri led laga raha hoon same old stock fog light wiring par. Jaisa ke apne kaha ki low beam par 35 watts hoti hai m617 aur meri stock bulb 27 watts hoti hai, toh kya mai aise he plug n play kar sakta hoon stock wiring par? Please advise bhai

[@ShrinivasMore]

No issues. They are designed to sustain that much wattage even though some people use 55w 65w hids on stock harnesses without any issues and 35w is not much off an issue

[@Rrocksstar]

@@ShrinivasMore thanks brother for the reply 👍🏼

[@kuchbhi9758]

Iske positive red or negative black ke alawa headlight wiring me white and yellow dono lagane h kya ? Or kis colour wire me please

[@ShrinivasMore]

White one is negative yellow wala positive

[@kuchbhi9758]

High beem ke liye h4 me laga le yellow ko or white ko nagetive same black ke sath jod skte h kya

[@ShrinivasMore]

@@kuchbhi9758 ha

[@pankajaurangabad]

Sir maine iph projctor lagwaya work toh thik kar raha hai magar .raat ko gaadi khada hone ke baad subah battery dead ho ja raha hai.plese help me sir.

[@ShrinivasMore]

Aapne high beam ko switch install Kiya hai kya?

[@sumeerkhan36]

Bhai meri kwid m bhi m 617 iph projector lagi hai

[@ShrinivasMore]

Hi beam ka connection kidhr karwaya

[@sumeerkhan36]

@@ShrinivasMore ji bhai mne khud fitting ki h tri colour teeno working h Or high been bhi teeno p working h

[@nandkishorpatil9322]

❤

[@manjunathhiremath8312]

Bhai, Ism installing iph m617 fog lph for swift car. could you please draw a sketch diagram in paper and explain, I am little confused to understand the connection at switch end. Thank you

[@ShrinivasMore]

The switch ka connection or other connection? DM me on insta I will explain the connection also watch part 1 video

[@sauratabhabiswas7057]

Bhai mene isko order kiya hai aaj IPH projector foglamp M612 with Crystaleye LED 130 watt.... Par iska Hi/Low ko kese connection karu kuch samajh nahi aa raha... Mera gari hai BOLERO NEO N10 2022 BS6. mujhe isko individually Hi/Low. + headlights k Hi/Low k sath bhi connect karna hai .

[@ShrinivasMore]

Insta pe aajao detail mein batata hu

[@sauratabhabiswas7057]

@@ShrinivasMore insta ID kya hai?

[@sauratabhabiswas7057]

@@ShrinivasMore I have sent you message request

[@rohitmundhe5196]

What was the problem if keep connection on headlight ??? Sx4Cross Owner Granite Grey MH12

[@ShrinivasMore]

Not a problem but you will not be able to use the high beam function of the foglight individually and need to turn on the headlight every time. Sometimes we forget that the high beam of the headlight is on accidentally and we are driving in the city so it will really disturb the people on the road. I am using the iph high beam function only on highways and to blind other drivers who drive with their high beam and even Asking for low beam they do not give low beam on

[@rohitmundhe5196]

@@ShrinivasMore Which LED you've in Headlight

[@ShrinivasMore]

Excelite 55w h4 led. I aligned it properly so it creates the same halogen bulb like pattern in low beam and for high beam it definitely bright but again who needs high beam in city because iph low beam and headlight low beam covers almost all area without hurting anyones eyes

[@rohitmundhe5196]

@@ShrinivasMore Nice one For how much you got your Foglamp and Headlight led

[@ShrinivasMore]

Fog lamps for 6300 and the headlight bulb for 6500 something didn't remember the exact price

[@anikethirale5522]

❤