$13 ebay Halo LED fog Light install with Angel Eye LED Switches

[@djxearo]

i've installed 4 of these, the quality is pretty much 2 weeks in every day use. then they burn out.

[@Merkof300]

djxearo it only lasted 2 weeks? Dang lol sucks

[@Tom-ol1ik]

SAME! had a couple, worst idea ever..

[@BBHemisnJets]

Don’t waste your time on Chinese shite ! And messy BS wires. Opt7 - Much easier and way ($45) cheaper >>>>> kzbin.info/www/bejne/fnbRhHyuj7t5abc

[@janceng3494]

You should use long life product,some price don't have high price.Some are expensive，but High parity,extend the span.

[@muhammadf4245]

these are fog time only.. use LED TUBE instead of you want a quite longer time..

[@Habib_T_Diaries]

Anyone here watching in 2024

[@C_O_W_B_O_Y_J]

Me lol 😂

[@Kevin-xz2fg]

i had a 1998 sl2 saturn that got 30 mpg everyday every week..i hauled 2x4x16 boards from the lumber yard with no issues, paid 50 bucks for a set of 4 tires that lasted me 3 years and put a 96 dollar exhaust on it..that's it in 3 years..damn fine vehicles!!

[@jrgc9051]

Yes, what a good video I liked it a lot I think that just as you explain in the video that is how everyone who is going to install something in their cars has to be, the only thing missing is to show how the lighting looks on the road and on the wall excellent video Greetings from Honduras

[@bencinnamon]

Those old Saturns are badass in terms of reliability. Great wagon

[@NeoJSsk]

Am I the only guy who spend more time finding my tools than actually doing the job ?

[@burntchickennugget191]

I share a house full of girls and i just noticed how scrambled my tools were.

[@thewhitekid2177]

Your not alone

[@dominiccuanan1673]

Yout not alone bro..

[@hacatan24]

Average time 1hr for a 10mm... But i easily found a 9mm and 10mm when I couldn't find them last week lol

[@MagicGate814]

My wife like to "clean up" and I spend most of my time looking for stuff/tools then actually doing the install

[@rickguynes3288]

Firstly loved watching your vid. Be honest though everybody. What do you expect from $13 Ebay lights???? Your cars are 12v but when running your car is pumping out nearer to 14v. Hence BOOM!!! bye bye lights. Especially if from China lol. Once again great vid. Was nice to see how they looked working.

[@OdykKayne]

If you install a resistor or something to lower the voltage then they should last!

[@rickguynes3288]

Exactly right Kody

[@ROJINEGROSFC2024]

There are no $13 they cost $116

[@Sshtb0x_cars]

Came across this video by accident. I'm currently looking for some fogs to install on my 97. Was actually thinking of doing something similar to this but I want to use some lights from auxbeam or something. Was thinking 4" but it's going to be too big. Nice vid!

[@WilliamDye-willdye]

2:43 It BASICALLY LOOKS STOCK!* * Some restrictions apply. Requires unspecified levels of squints, and not noticing rough edges uneven cuts and general deformity. May cause mild disappointment or death. Ask your doctor if BASICALLY LOOKS STOCK is right for you. Offer void where restricted or prohibited or unrestricted or not prohibited by law.

[@VelocityLabs]

Hahahaha I wish I could add that voiceover line back in!

[@jrrican5770]

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

[@howdy000]

I've been watching this video non stop for days on end. I just bought the fog lights... Might have to pay someone to install though. I love how the buttons show which angel eye feature you're using. From what I gather... I only saw one button which was the ring, and it was the ring on the outside. Great job and great video! Thank you 🙏🍺

[@smith_dsm6287]

I love watching your channel! I have a 93 eclipse track built which is also my daily driver and I have a 92 eagle talon tsi that I just finished rebuilding, all I have left is to get a new ecu and ecmlink from ecmtuning and it will be complete!

[@WilliamDye-willdye]

B Rad Smitherz : Sounds like fun. I subscribed to your channel just in case you decide to post a video about them. No pressure, though. YT doesn't pay small channels.

[@happysawfish]

What a GREAT video on the DIY! Very well thought out. Helpful. Best one I've seen in a long time. Now all I can think about is getting some Yellow Fogs and installing the hell out of them!

[@ericsmiley5079]

The futurama clamps nod was appreciated

[@CH3RRYxB0MBx]

Very much so

[@p0mp1tt0]

That made my day

[@technocurry]

Strapped these to my ae101r 5 weeks ago, still great today. To be fair, i havent actually used the fog lights in fog yet, but the angel eyes are great.

[@gstyles5668]

Was planning on getting some of these halo fog lights but if they go out within 2 weeks of use then they are garbage. During winter in Central California, it gets really foggy. Will just pick up some oem fog lights and throw some quality led bulbs in.

[@Sky1]

I just purchased a new Scatpack widebody Challenger. The car does not come with fog lights, where fog lights typically go the widebody Scatpacks have closed off grills for the inter coolers and trans coolers that are not included in non-supercharged Challengers so I plan to do the exact same mod. I would like the halos a bit lower light level might add a resistor so it matches my existing headlight halos and curious about the Color of the fog lights in Kelvin, they look like 5000's my Stock HIDs are 4300 I believe but might be changing those bulbs to 5000's so they will match in color. Please let me know if those are still working. My stock HIDs really suck especially in the rain. I really was planning on spending a whole lot more on set of fogs but really like that setup, even the switches look awesome, If these are a no go I will look at Hella or Lumen but these look like a great deal.

[@VelocityLabs]

Nice!!! The fog lights part still work, but one of the halos flickered out and stopped working after about a year.

[@GarretSterling]

Bravo on the Futurama reference "THE CLAMPS!"

[@prestobizmal]

I bought these cheapo lights then swapped the halos for rings that are color changing using a blue-tooth app. The swapped halo "bulbs" were twice the cost of the full map assembly but they look good.

[@hagglundguy]

I love how you use anti vandalizing buttons in your own car

[@glitchthecat5011]

That's dope af.i bought the purple ring led i cant wait to replace my factory ones

[@dougbruce6051]

Awesome video, those seem to be some great looking halos for the price. And I like how the switch is also a Halo lol

[@andyw8009]

I have had exactly same ones and one stopped working after around 6 months...they looked great though when they both worked

[@PREDATOR07]

The ONLY Saturn customized in the galaxy

[@iknowyourerightbut6246]

I may want to do this on my 2014 e350 with led lightning package. The fog light switch is already there as they moved the DRL from bottom of the bumper into the headlights..!

[@DustySteel]

I put Morimoto Bi-Xenon projectors on my Saturn. I can flip a switch and they go to the brights.

[@EataPeachMike]

Nice video but how long did they last?

[@shaunmostert1585]

So how long did they last ?

[@VelocityLabs]

One of the halo's crapped out after a year, the regular fogs are still going strong though.

[@naneishamitchell6148]

Can those lights fit any type of cars?

[@iyfsize]

Are there with drl?

[@Bluesr0cker]

Just wondering, why didn’t you wire the halo to the headlights and the foglights to the rear fog lights?

[@dustinw.2001]

I have some and I’m wanting to put them on my 99 s10 blazer. I just have one switch for them both and will the halos and the main fogs turn on with that? I mean I don’t see why not

[@logan5326]

How the lights are holding on?

[@OdykKayne]

I'm curious too!

[@mattts4g]

Yeah yeah cool and everything but the great question is does it works? I mean really light up? or are they just aesthetic?

[@thabopoo6285]

Aesthetic. I have them

[@neoknight14215]

This is an impressive install

[@ilyas5708]

I noticed on mine that the halo wires aren't sealed in any way. There's a big hole that i plan on sealing with some silicone before i put them on

[@ilyas5708]

I've had them on since then and they're still functional and nothing is broken. Though I did notice that the beam pattern is more like a flood light albeit a very weak one. It's equivalent to taping flashlights onto your car. Halos look cool though.

[@shonoff83]

Can you do sequential taillights for a Chevy suburban?

[@BrianFrishcosy]

Are you going to be upgrading the headlights as well, so the light color matches?

[@FcWARREN]

Haha, I bought 2 sets of these, one of the halos lasted like 1 hour.

[@silent_torseeker7741]

Good thing I'm seeing these comments

[@daimientaylor3108]

Probably because the LED's overheated and burned out. Most LED's have a Heatsink connected to the back side of the module

[@nelsonacusar472]

How to order and how much- how many is the wattage?

[@ft420]

3:00 watch him put a scratch in the bumper with the screwdriver

[@NeoJSsk]

FT I doubt that he cares about it. A car like that I would probably careless too

[@Grenadieros]

Lot of scratches around the bumper but this isn't a major problem...

[@alrosenfeld5958]

Love your vids! Quality over quantity!

[@benkalinowski5834]

Nice I just got a set ordered got my car Are they still lasting of dead ?

[@johnnyVGtran]

i love the reading of the box specs haha chinese gotta love em 😂

[@williamschannel8498]

Hello, can you install the lanterns without placing a relay?

[@adamg9079]

You make amazing videos. Keep up the good work and the subscribers will flood in!

[@josephbrown7688]

The clamps. Futurama?

[@donovanatwood7672]

When are you bringing bugford back?

[@karzygijose]

Which size did you get vs the size the body was? Also how is the life span of these?

[@lavaskullentertainment4231]

Do I need 2 relay for the project?

[@tommyyip4144]

The halos looks cool and all but i don't know about putting them on a saturn. But thats only my opinion.

[@boosted2.4_sky]

I saw you in Bugford on Rev'd Up.. on Velocity.... just now. . Pretty Cool!

[@VelocityLabs]

Yeah, I saw that too, it was cool they had it on! Terrible show though, it's soooo bad lol

[@boosted2.4_sky]

Velocity Labs yeah it's the only show on velocity that I don't watch regularly...I was flipping

[@Fkidd702]

Oh wow . Those are pretty bright

[@nelsonacusar472]

How much is the price for two fog ligth?

[@magnetic911]

Can I change the middle inner bulb of the projector ??

[@jdmchickkustomz9417]

So there's a power for the LED ring and a separate power for just the fog light? I just ordered these for my Civic and I'm trying to figure out how to wire them. So then are the other two grounds you have to ground out the fog light separate from the angel eye ring?

[@breakwood8531]

When your fog lights are better then your headlights is when you know you got a old car.

[@2Skinny]

When your fog lights are better than your Saturn...

[@ilanpro]

I have these and they lasted 2 weeks the halos are good the dogs are not 1 is already out.

[@VelocityLabs]

7:43 That's what I was worried about when I talk about it at the end. I'll make sure to keep this pinned, if anyone else has experience with these post it up!

[@Hellpain]

I bought this for my Volvo 855 T-5R front. I hope they last longer than 2 weeks.

[@madlima2929]

Micke A , just install a 150 or 200ohm resistor on the leds power cable. Problem solved. Maybe its not that bright, but it will last for a couple of years.

[@mitchellsauls9930]

Rui Lima, which is better? 150 or 200?

[@nickem7]

I changed mine 4 times with warranty. Halos lasts about 1 month. Finally I opened them and fixed circuits

[@Narcio215]

Niceeeee.. One question though is do those halo switches come in the original box with them lights or nah a special added touch?

[@VelocityLabs]

no those are purchased separately

[@MisledDan]

Do the projectors have a cutoff shroud inside?

[@OdykKayne]

Looks nice! I'm trying to find some LED lights to install on my 2009 Hyundai Accent as fog lights as my model never came with them, but the panel the fogs mount to is one huge, completely different plastic panel in the non-fog cars, compared to the models WITH fogs....hard to know where to mount them! :(

[@VelocityLabs]

That's simple, mount TWO in each panel then! Or get a bigger size fog light!

[@OdykKayne]

Part of the problem is that they won't mount flush as the panel is rippled. i.gaw.to/photos/1/0/10138_2009_Hyundai_Accent.jpg?1024x640 They would go, in factory form in cutouts in the corners of this bumper and are installed in that huge black plastic piece. I'd have to replace that entire piece if I wanted to go for a factory-style mounting location. I could mount lights there, but I am just not sure how they would look on the rippled plastic...trying to find lights that wouldn't look tacky is the issue, haha!

[@Eric-zq6sb]

@@OdykKayne I wonder if you figured that one out since then. I am dealing with the same issue, having bought the Angel Eyes fog light and figuring out how to get the right wire and stick the thing in front of the car. lol

[@OdykKayne]

@@Eric-zq6sb I ended up buying a OEM-style aftermarket foglight kit :)

[@Eric-zq6sb]

@@OdykKayne Nice! I'll look this up.

[@abimaelmendez4912]

How bright are they?

[@gamerezkitso2423]

Name of the music in the background

[@jakefromstatefarm3256]

Where can I find a hid headlight projector assembly with ballast and lights? For 1998 Impreza 2.5 rs

[@clevervaldeziriarte6646]

Yo compre unos parecidos, pero estos vienen con un controlador LED. Al instalarlos y probarlos con el motor apagado, todo funciona bien. Pero si enciendo el motor, pasa unos segundos y se apagan y no vuelven a prenderse. I bought similar ones, but these come with an LED driver. By installing and testing them with the engine off, everything works fine. But if I start the engine, it passes a few seconds and they turn off and don't come back on.

[@adenaudain5857]

Did it last ?

[@rogervillareal3472]

Hey there. Just caught your halo fog lamps vid. Can u refer me to projector headlamp and halo fog lamp install for ‘08 Nitro?

[@darshikasingh6311]

Are those fogs still working?

[@jordanfriedman6604]

Hey I put these halo fog lights on my Mini Cooper today and now the car won’t start??? Please help, I checked every fuse and still won’t turn on

[@boosted2.4_sky]

Daaamn. .. Those are bright.... Noice work!

[@robansas9620]

So.. Got mine - installed them. All was working while adjusting the fitments, turned my car on for 2 minutes one of my fogs went out, after 10-15sec the 2nd fog went out aswell, yet the angel eyes work fine.. Any ideas?

[@jay_alpha]

Look I knows this problem which happenes to this Anjel eyes....what I did was cause these are little low wattage for each module I installed 12 volt voltage regulator cause during running of engine the alternater gives out around 14-15 volts so it may have burned them cause they are cheap and will go.....do this just add a 12v regulator it's easy just search on internet how to make a 12 v regulator just install them for the both and make the connection just make sure you use a heavy duty voltage regulator capable of handling the wattage this will increase the life.....idk what to do about the fog lights which you are not able to turn on.....just make sure a connectivity test using multimeter it will make you sure if is burned or alive....good luck bro do read this

[@eatwithus35]

My main bulb works but the halo doesn't? What am I doing wrong?

[@happysawfish]

Eat With Us: sometimes this stuff does not work right out of the box. Even supposedly 'good' manufacturers. What did you find out?

[@christianxzowner2958]

Did you do a vid for logo welcome door light....that be cool to see

[@blucarter5057]

Can this light work in my 2013 Nissan note ?

[@junechris]

I can't do this on mine, it's a 95 SL2. It would look better on mine if I installed them in the middle grill that I modified to look like air ports.

[@TheRattleSnake3145]

why didnt you show the beam?

[@bgesjackson2011]

Amazing video!! Gave me a great idea for my semi commercial truck and to fill the blank on the bumper!! Great detailed info man.. thank you so much!! 💯👌🏼

[@technocurry]

Ive had them on ma car for 5 months now Water inside, still running. Thats only the angel eye, since i never use the fog light part

[@MrFireface789]

Are they still alive?

[@VelocityLabs]

Yeah, one of the halo's burned out after a year and i replaced it, they're still going though, it's been 2 years now.

[@aceofspades02]

beautifully done, BUT! These are "speed lights" and not "fog lights". Speed lights generate a "narrow" light projection in a sense that it concentrates the light into the "horizon" (far away ahead on the road); while Fog lights spread lights horizontally, and not supposed to go above the bumper height, because if it goes above it in a sense of "crossing" the way of the driver's vision, it will burst the white of the fog (creating a "halo") thus, the driver won't see the road. Fog lights usually use vertical-striated lenses but it might also has vertically-striated concave mirror. (But the striation in the lenses is more effective.) And the light bulb must contain a deflector system (usually a tiny metal shield in front of the lamp.) to avoid the light going above the bumper height for two reasons: one, to not burst or flare back the for; two, it can be used permanently, without harming other drivers' view. Speed lights are better if installed above the bumper (the farthest from the ground as the local laws and regulations would permit) and Fog lights are better if installed below the bumper (the farthest from driver's eyes level in a way the projection doesn't cross one's view, therefore, the lowest as the laws of Physics would permit (impossible to stick the lights under the asphalt). If, for any reason, the vehicle goes on foggy places where the driver must also pay attention to what is coming above, like "ceiling in a tunnel" or "animals on the trees", then the fog lights must have the deflectors mounted upside down, and they must be installed the highest as possible as both local and Physics laws would permit: roof lights.) Other than that, I totally appreciate the quality of the work presented in this video. Good looking finished result on the dash board.

[@Leethere]

How long did those last for you?

[@olemissjim]

You should have just use one switch for the fog lights, and wired the halo relay to the “ignition on” or the “running lights”. You made it more difficult and are going to end up with a dead battery

[@RaTchoMaster]

Hi. I have The same lights n my question is what fuse do you use to them?

[@camiloandres2969]

You use a relay

[@richardtrow2751]

I've fitted a few set's of these you need to unscrew the halo ring off the front of the lamp take the lenses of the rings and fill with clear silicone around the led rings 're fit lenses problem solved !!!! Keeps the wires on the back of the rings and keeps the water out.

[@pinch-of-salt]

can you switch the projector lamp lights for brighter bulbs or something?

[@thabopoo6285]

You can not.

[@NomadicSociety]

nope

[@iamalsoag]

What gauge wire did you use?

[@thabopoo6285]

Are these 6 inches?

[@jimmyfavereau]

no output pattern?

[@Malvarez909]

Looks like a Spaceship! haha nice

[@juliolozano1161]

Looks great. Love your vids.

[@davidwilliams6221]

So where do you get the halo switches from? Can not find them anywhere

[@VelocityLabs]

I added a link in the description!

[@davidwilliams6221]

Found them now thanks. Did they last long for you? The halo lights of course?

[@VelocityLabs]

@@davidwilliams6221 The switches have been holding up for years, one of the fog lights did burn out after about a year. I replaced it and have been good so far.

[@sirdrakey]

Might do this on my frontier!

[@joegekko]

Give it the clamps!

[@VINNY5674]

I've been installing all kinds of leds light's on different car's and i will say this you get what you pay for. These cheap brands all fail to soon!

[@MFullaStyle]

Where did you wire the halos ?

[@kris1696]

Can you tell me what wire harness you used

[@AmritpalSingh-jk4et]

can i get the link for those light?

[@sgtmyers88]

I had a set of these that I literally just took out of the box and out of intuition I tested them with a 9v battery for defects and to my shock they didn't even last 30 seconds and the SMD Capacitors started to smoke before the LED's burned out. WTF!? I can only imagine what would have happened if they were plugged into the cars wiring. Can someone chime in? How can something like that be allowed onto the market? Or did I somehow get a bootleg copycat version that had no quality control?

[@jojitperlado6112]

Hi,,, What is the diameter of the fog light that you installed?

[@677bman]

great channel man i like the dsm videos being a dsm guy myself =)

[@borris.dnt0]

Where do I buy that battery?