Part 2 - How To Make Your Own DIY Custom Fishing Spinners: How To Paint Your Own Lure Bodies!!!

In this second part of our series on how to make your own DIY custom fishing spinners I will show you the steps on how to paint your own spinner lure bodies. Painting your own lure bodies and adding some realistic detail is easier than you think. So if your looking how to make your own DIY custom spinners or paint the lure bodies for them you came to the right place! Thanks for watch and God bless!
Pro-Tec Paint:rockislandsportsgov.com/pro-te...
Spinner wire .026: rockislandsportsgov.com/stainl...
Airbrush kit: www.amazon.com/Airbrush-Fy-Li...
Fluid Bed Video: • Cheapest Fluid Beds fo...
54 cent airbrush paint video: • Make your own air brus...
Walmart paint for airbrush: www.walmart.com/search/?query...
Click the link below to view the descriptions for all my FREE books: inheritancewm.org/ministry/min...
To download any of my FREE books directly select the link below:
"Growing Deep" (Knowing and growing with God): inheritancewm.org/wp-content/u...
"Freedom From Depression In Less Than A Month": inheritancewm.org/wp-content/u...
"To The Brink And Back Again" (All about my journey with cancer and God delivering me): inheritancewm.org/wp-content/u...
"Real Life Devotions For Real Life" (52 week devotional book): inheritancewm.org/wp-content/u...
Click here to sign up for our FREE weekly Bible devotional and ministry updates: inheritancewm.org/

[@charlespalmer7706]

This one great video I make my own lures my dad taught me when I was a kid in the 70's. I always wanted to spray my lures now I will be doing so with your help thanks. May GOD always bless you my brother. Fish on and as always good luck.

[@thefrugalsportsman]

That's awesome and so glad you found the video a help! Thanks so much for watching! Take care an God bless you my friend!

[@justtinkering6054]

That guy that made the fluid bed video is really smart. He's also very good looking and funny and....... ;) Thank you for this video. It is very informative. I haven't made these inline spinners yet, but thinking about making a few. You did a great job.

[@thefrugalsportsman]

Hey thanks so much for the encouragement. It means a great deal to me and I really appreciate your support! I do have to agree with you that the guy that made those fluid beds I use is really smart and handsome too! Thanks so much for idea and hopefully the link sends some watchers over to view your channel! Take care and God bless!

[@richardpogue4959]

Great video very informative

[@thefrugalsportsman]

Thanks Richard I really appreciate it! Don't forget to check out my other videos in this series on building your own custom spinners! Thanks for watching and God bless!

[@marshallwages5035]

Very nice man

[@thefrugalsportsman]

Thanks and I hope the video was helpful! Thanks too for watching and God bless!

[@robertwentworth7775]

Awesome video,very informative. I would like to make some spinners, lures.and plugs. Videos like this will point me in the right direction. Stay safe and tight lines. May God bless you.

[@thefrugalsportsman]

So glad you found the video helpful! You might want to check our my homepage on my channel as I have lots of videos on making your own lures and a series of videos just on making spinners alone! I hope that helps and may God bless you as well!

[@robertwentworth7775]

@@thefrugalsportsman thanks I will. Have a great day

[@Mark--Todd]

Just found your channel. Excellent content, sub'd

[@thefrugalsportsman]

Thanks so much Mark and welcome! I really appreciate that and your kind words! Thanks so much for watching as well and may God bless you!

[@lukenickens354]

Do you paint the spinner blades or powder coat them. Thank you for tips I really like your videos.

[@thefrugalsportsman]

I normally spray paint the blades with the air brush, but you certainly could powder coat them. Spray painting allows me to keep the shine on one side where as powder coating you would dip them and cover both sides. You could also dip half the blade so you still have some of the flash. Either works, but the powder coating would leave a harder finish though. Hope that helps and so glad you enjoy the videos. Take care and may God bless you richly!

[@lukenickens354]

@@thefrugalsportsman Thank you God is good

[@offthewallmbell]

Where do you buy your lure body’s?

[@thefrugalsportsman]

I don't know if you saw part 1 of this series, but I make my own as it is so much cheaper and I can customize them too! I got the lead mold from Rock Island Sports. Here is a link if you are interested: rockislandsportsgov.com/do-it-lure-body-mold-1-32-1-16-1-8-1-4-3-8-oz-model-3225/ There are a few places that you can buy them like on Ebay and Jann's Net Craft, but they can sometimes not be available or hard to get. I hope that helps. Thanks for watching and may God bless you!