Рет қаралды 2,991
Part 2 of 2
In this video I'm actually installing subwoofers, my amp, along with a line output converter (LCi2Pro) which is usually needed with today's newer cars unless you have an aftermarket head unit. In order to install the line output converter you need to tap into your factory subwoofer that is in the back of the car but wired to the amplifier. There isn't an easier way to tap into the wires without actually going going to the wiring harness that is hooked up to the Factory Amp. For the 2022 IS 350 the AMP is in your trunk located on the right side. You Will Need to Tap into the 6th and 21st wire.. The 6th wire down is *Lavender and Grey which is you + positive and your 21st Wire which is the 6th one down as well, on the opposite side which is *Lavender with a Blue line which is your - Negative Tap. Since you can only tap in to one subwoofer once you run the wires to your line output converter you will need to run jumpers to the other side. Meaning it doesn't matter if you hook into the right or left of the line output converter. You will just have to run a jumper from either side you choose to the left or right +/- I hope this helps!!
#Lexus #LexusIS350 #2022 #Subwoofer #Amplifer #AmpInstall #LCi2Pro #Install #AfterMarket #CarAudio #RockfordFosgate #LineOutputConverter #KZbin #FredYevich #DailyGrind