Part 4: Eachine E010 E011 Upgrades - Propeller Mods With Thrust Test Comparison

[@bullsaver9192]

Very useful video, already thinking how to modify my e011 as soon as it arrives. Keep up the good work!

[@quadspex6895]

Glad to hear it!

[@Sully365]

i have a video on enabling acro mode with a simple firmware update and programming piece. acro is soooo much fun with the 011

[@nstorm2415]

I used the 2 blades and it is not a good idea to use it, with 4 blades i feel i have longer flight time.

[@onclefly8450]

Hi, I testing 2 blades for the E10 Better and for E11 not. :)

[@flowrfpv]

is it thrust test with e011 or e010 ? Thats important becasue E011 have bigger motors

[@thelennipede9382]

its with racerstar motors. they are aftermarket and are not included in either quadcopters.

[@quadspex6895]

As The Lennipede mentioned, these are the racerstar motors that fit in the E010 frame (615 motors).

[@ryancaindoc8903]

how can you modify the e011 prop? can you make a video?

[@quadspex6895]

+Ryan Caindoc You can use nail clippers to cut two blades off. I like to use a dremel to smooth it down to the center portion to make them more efficient and balanced.

[@NotGyra]

Hello, does the rakon 3 blade different with kingkong 3 blade??

[@quadspex6895]

+Acro Boy the Rakon and the King Kong props are different.

[@NotGyra]

QuadSpex thanks

[@davideazelio]

The 3 blade props are more noisy?

[@quadspex6895]

No, at times it seems as though they are quieter.

[@moser1214]

I also tested the 2 blade on the E011 and it was not better in the least! It could barely hover let alone lift the drone with a camera installed on it. With the standard 4 blade props and the same camera installed, it has plenty of power. Don't modify the E011 to the 2 blade prop!

[@ilovemikuzr3567]

have you tested the 3-blade prop? If so, how does it perform on the E011. My E011 is arriving this week...

[@quadspex6895]

+Arjohn Reodica check out this video for the 3-blades on the E011 :). kzbin.info/www/bejne/Y527aZqpgMiMgtE

[@ilovemikuzr3567]

thanks!