Part 4 Installing the LPG tank VSI-2.0 LPG

How to install a Prins VSI-2.0 LPG system? In this movie you will see the installation of the LPG tank.
VSI-2.0 is a universal bi-fuel LPG system, R115 approved and based on Vapour Sequential Injection. This system is developed by Prins Autogassystemen B.V. in the Netherlands and supplied through a wide network of specialized importers and installers. For more information visit: www.prinsautogas.com.

[@johnzoetebier3074]

I have been driving a car on LPG for more than a decade in The Netherlands without any issues. Based on these positive experiences I had an Australian manufactured Sprint Gas LPG system installed in our Toyota Ipsum. Wish I have never done it as we had problems from day one for years to come. Tank was not installed properly so filled up 100%. Computer not programmed properly and car could not even get up our hill. Mechanic had to be talked through the instructions over the phone with Sprint Gas in Australia. The first year there were problems again. Workshop just guested what the problem was an replaced blindly bits and pieces. Next I told him bluntly I would never get the car serviced by them again and rather have Sprint Gas removed. Luckily there was an over 80 years guy who serviced LPG from a shed in Whitemans Valley. Every year there were problems with this fricken Sprint Gas installation. It has costs us about $8000 overall , not to mention the agony of getting the car into the workshop over and over again. The old man died last year and now is not a single person left in the Wellington region who can service Sprint Gas anymore. Next Monday I will have the LPG cylinder removed once and for all. I will never ever get LPG installed in New Zealand again.

[@za906]

What is the LPG and petrol price in new Zeeland?

[@mannmann5386]

Fantastic job

[@makantahi3731]

i have prins vsi in my v8 car and it works almost properly: vapour filter is junk it falled apart-iner ruber seal was desintegrated and filtering part did not sealet so dust went around filter so i made my vapour filter and housing for pressure sensor

[@MohammedAhmed-ju7bv]

Quality job

[@honeysingh3162]

Nice video

[@apongjamir4972]

Is boot space going to be an issue if we have to install the same in Maruti Baleno?

[@sarratz7813]

e possibile fare un corso in Tunisia per questo impianto ,

[@giovannicazzola7681]

Come posso sostituire il filtro gpl 181/140000/b sul suo contenitore ? Grazie

[@38KSW]

Hey, I can't seem to find the other videos have you removed them or did YT drop them.?

[@Prinsautogassystemen]

Hi, you can find all our videos here: kzbin.infovideos

[@apongjamir4972]

May I please know the boot space of that car

[@Prinsautogassystemen]

Sorry for the late reply Apong Jamir. Please contact your local distributor for this question: www.prinsautogas.com/en/distributors

[@farzad6560]

Why not in German and french?

[@Prinsautogassystemen]

We have two distributors in German and also two in French. Please check here: www.prinsautogas.com/en/distributors

[@net.observer]

Könnte kotzen, wenn ich eure möchtegern Rostvorsorge an den Löchern sehe. Das kann man auch vernünftig machen und richtig versiegeln.

[@Prinsautogassystemen]

Thank you. Please know this is a video dated from 2014... things might be outdated, normal back then but different now.