Part 42! 1968 VW Radical Custom Ian Roussel Fabs The Passenger Door. Do We Have A Match ? 🤔

[@h2oman001]

Have follewed you on Motortrend for years now. Full Custom Ian is so much more in-depth and shows off your skills even better. Keep 'em comin' Ian. Great show!

[@scottcampbell2929]

Jamie your playlist is spot on and your editing skills are impressive. Ian the car is listening to you and obeying your instructions.

[@KD52Iwo]

You can best describe the tempo of this episode as...SNAPPY. Good pacing, editing, and music. Another fun trip down to Fab Land.

[@trevormccarthy4175]

No wonder I'm tired down under. I watch these in bed before going to sleep....but hours later I'm still watching. Bloody incredible & amazing. 😮😅

[@Bob0sModelFabWorx]

Having watched you work on your projects over the years, I think this presentation here on the tubes is the best yet. You give us the impression that you wing a lot of the design But I'm really impressed by the production of each video clip. I think it's just as good, if not better, than when you had a full production company behind you. The editing is spot on and concise in what is being shown. It's not often we get to see great content with the production so good, we don't even notice it. Awesome sauce, to you two. And thanks.

[@alanhartley173]

Love the music montage. Surf music only when working on the bug.

[@severinappleton3438]

Very creative show -- pluss at the end of your custom work your cars actually hit the road ! I have allso watched Bad Chad custom … But all he dose is to fill his new shed with with cars that never get to be driven !

[@Friskee62]

I do not like Bad Chad. I tried to watch it, BUT. So, no more B C for me...

[@jeffricher-qy4bq]

I prefer both they both do there own thing I don't sit and compare

[@bigshow5173]

Not defending Chad's coathanger welds, hockey tape seam sealer, or foil tape holding card board door panels. But, Canada's vehicle inspection is very strict not like the US or California especially. We here can just take paperwork down and get it registered.

[@101scetch]

I kind of like bad Chad because of his creativeness, but I will be honest that sometimes the outcome of some of his vehicles are a little bit weird, but I suppose that is in the eye of the beholder. Take care of yourself.

[@cajuncreator]

I’ve been watching Ian for months and yet to see him drive anything, lets see, Jeep, bug, truck, zephyr, Cadillac

[@h2oman001]

Jamie you are doing great work with the music. Thanks

[@poplaurentiu4148]

We love both of them ! we watch from the other side of the ocean - Europe.. Big Love Ian !!!

[@40momba]

Happy Mothers Day Jamie! George The GlassMan👽👽👽👽👽

[@johnhart125]

I love the concept, doors are very cool and unique, pure Ian!

[@Jack_Ratchet]

Music to my ears! Love the genre and mood it sets with just the right amount. Kudos Jaime! Well done.

[@KaycieCarryl22654]

The 2nd door setup was awesome! That went a lot quicker for sure.😮 AND...happy Mothers Day, Jamie. 👀👩‍🦳

[@donbell8187]

The music is fun and not overbearing!

[@NathanBrannock]

Great job happy Mother’s Day Jamie. Great job on second door Ian. It’s gonna look great.!!!!

[@jeeptrucklover72]

Wow! Good job on the doors! It took a lot of work but I think it’s going to turn out great! Can’t wait to see it finished.

[@russellstewart5414]

The soundtrack is so fitting. Just a great vibe and not distracting from the work itself, it’s going to be another great success

[@Friskee62]

NICE...like your choice of music so far, Jamie.

[@Jammer0825]

More of the musical montage!!!!! It’s awesome. Where do you find that 60’s vibe

[@JohnPriester-xe5sq]

Jammie your editing are better with each video. Love your banter with Ian and the music. Ian just made my first million by investing in metal cutoff discs

[@martyb.1291]

Jamie's bug it's getting there always a pleasure to watch thanks 🤟👽👍🍻🍹

[@user-lj1hi4xh6o]

Ian what can I say ?again awesome work, Jamie happy Mother’s Day

[@brentbarnes5802]

I am a carpenter by trade. I do everything tho I'm a general. But I grew up doing this stuff as a kid my dad had a race car in the 9os. And I was always in the shop. We also had a mechanic shop when I was younger that burnt down when I was just a kid

[@SamBorrello-os3vx]

You make the passenger side look easy. Ofcourse you're the master fabricator

[@larryreece1403]

Tunes are perfect!

[@Theflipjunkiegarage]

Amazing.. as we all knew it would be !!!

[@johnconnick3796]

Thank you for the upload 👍

[@brentbarnes5802]

So awesome Ian that's what I been waiting for so see how we are going to do that. I feel like I'm doing it too. We think almost exactly the same. I get you bro. I can't stop watching.

[@derbf1]

Thank you for sharing another day of your artistic journey 👽❤👽 the music is fantastic.

[@bobbyshelton8781]

Yes, Jamie, I like the music it works for me .

[@caseyspirit9385]

This one is gonna be nice! Love the doors!

[@N-Scale]

Pretty cool !!

[@SamRalls-ti1be]

A trick I learned. Order some 1" neodymian magnets with countersink screw holes in the middle. Put a 1-1/2" screw through the center and double-nut it. (this serves as a handle). Use them to hold two pieces of sheet metal parallel to each other. Works really good. The screw makes them very easy to put on and take off.....just sayin.

[@JanusTheOld]

Sound Effects and Playlist are perfect, groovy with the Sense of Tune :)

[@markmilostan2493]

Jamie, your filming is amazing. You follow Ian around with such grace sometimes not even knowing where he is going and then back again. Ian Your fabrications are all one offs and one of a kind. Going to a car show with one of these. Get ready to be swarmed.

[@fullcustomIan]

Thank you!

[@rayfitzgerald4180]

Jamie,I was just thinking about the Incidental music and how I enjoy your selections and then you asked for a response t r o your montage.I for one approve your selections and think your contributions make this production better

[@tomtruesdale6901]

Great fab video and Jamie, love the music.

[@charleshewitt3026]

Happy mothers day Jamie , from the philippines Ian you are the GOAT love your work,Amazing !

[@petermordan8861]

Coming along really well.Congrats😊

[@136092195]

Awesome angle of the dangle Dude and Happy Mother`s Day Jamie TCOMITY

[@timjohnston7285]

I really love the style of these Jamie filmed and edited videos. It’s great hearing the banter between you two while also seeing Ian’s mad scientist genius :-)

[@fullcustomIan]

Thank you! We are keeping it real!

[@edfranklin2]

The advantage of multiple projects - I had totally forgotten about the VW’s fancy doors! Ian is a genius in the way he duplicated his other door, and music is so spot on! Great to watch while sucking on my morning coffee! Thanks kids!

[@foop8888]

I absolutely love watching this guy. He is the KING of the death wheel.

[@howiecowell6645]

I can't wait to see the bug done...think it is coming out Awesome...Ian is a inspiration !!!

[@r.a.monigold9789]

The Dude says - you don't need a rug, The doors tie it together. The nusic and sound effects are SPOT ON. Flee could not have done it better. Thanks for providing such a Labouski rich video.

[@rickerwill2]

Thanks for getting back to the VW! As much as I enjoy the Caddy and the Jeep, this project is filled with so much technological innovation I am just drawn to it. This is the Roussel creativity that I want to see.

[@ALPHASASYLUM]

More Ingenuity from Ian "Lucky Roussiano" Roussel. You are the master sir. Happy Mother's Day to you Jamie. Hope it is an awesome day for you.

[@billweinholtz154]

We should start calling Ian, Mr. Lucky 😂 It’s a pleasure watching from start to finish each episode. Thank you for sharing and Jamie, I hope you had a wonderful Mother’s Day. You ROCK

[@Marky-j3o]

You are a GREAT inspiration, love all your shows, I've done bodywork all my life and I'm still learning every time I watch your shows . Great there's no big drama just good information. Keep the shows comming.

[@NelsonRamos-tz4pw]

We need that you're keep busy on creation it make us happy whom love that's art .

[@RG-qn2qm]

Lovin it from Toronto Canada 🇨🇦........unbelievable work.

[@johnrexford2800]

Loved the Musical Montage.

[@AceMcgee-q9f]

Excellent love what you two do. Peace Love Ace out

[@jamesrankin9833]

Awesome! It’s got Angel Wings! You banged that out like Budda boom Budda bing! Happy Mother’s Day Jamie!🎉🎊💋! Good stuff!!

[@markmilostan2493]

I always "Like" your videos before they even get started and always watch them all the way through. You're doing great. Mark

[@baileyrivers7771]

The bug just gets better, Jamie loving you work you have come along way in such a short time,can certainly tell you love what your doing ,good music by the way . See you both on the next one

[@SirWilliamHorne]

Ian you’ve done it again, blown my mind! Those doors are so boss. You keep saying luck and I keep thinking, No that’s spot on skill! Jamie your sound affects, music and questions are perfect! Thank you both for the Sunday show and the bug fix,much needed!

[@SomeAnyBody]

Sunday breakfast with the Roussel’s. Thank you both and Happy Mother’s Day to all!

[@jimmimbs2900]

Great editing love the drum roll a lot and applause

[@Codycreatesthings]

Awesome work Ian, now all there's left to do is everything.

[@randalltravis29]

I love your music montage. Always stay with 60s beach music.

[@JosephLombardo-rk7ts]

Love that door opening HMD Jaimie

[@Jnike8715]

Has there been a decision on color of the really cool VW?

[@ellertorresiii1081]

Looking good Ian. I can’t wait until you install the push button and it will open quickly and smoothly. Hi Jamie, HAPPY MOTHER’S DAY 👏👍🙏🤩

[@MervTen-ms8bd]

Looking good

[@Scot-p1v]

Realized I was not actually supporting Ian by watching a couple other channels. Searched, found this, immediately liked, subscribed, and commenting to feed the algorithm.

[@henryallisonsr8318]

Just want to say hi to you all and Ian follow your dreams and keep up the good work. God bless and have a blessed evening and night

[@donlandenberg8126]

Nice job! Thanks for sharing with us.

[@markrogers397]

Jamie love the music 🎶 you edit in. Before I would forward the video past the cutting and grinding. Thanks

[@kidd1072]

You are definitely a master designer and builder!👏🏼👏🏼👏🏼

[@ThompsonAutomotive]

I absolutely love that hinge design! One thing though, I think it would help a lot if you used bearings instead of metal on metal contact for the "hinge arm" im gonna call it.

[@tfodthogtmfof7644]

Cut a narrow slot in your sliders and add some delrin strips or rails to ride on. It will ease the opening and remove the need for all the grease. Delrin rods or sheets can be purchased at a plastics supply like TAP plastics. It is a self lubricating highly durable plastic often used for bushings.

[@SleepyUncleSam]

Nice drum roll...👍

[@RandyColeman-i4w]

I would love to meet you guys, I enjoy e every video call make, Ian you are very smart man

[@FrankDeMaria-te2ee]

The bug is looking gooood. I like the mixing of the projects, it spices things up... can't get bored that way. :) ;)

[@EddieKing-k7s]

Musical montage was perfectly upbeat Thank you for sharing you and yours have a wonderful week.

[@fullcustomIan]

Thank you! You too!

[@ritchiestimpson2743]

Jamie, you play list is impressive … Early Link Wray, and early Ventures match perfectly! Congratulations on the award .

[@fullcustomIan]

Hey, thanks!

[@copperaudio9664]

Jamie - what they said. Music is spot on. Video editing is great.

[@craigtaylor2953]

Yes the music works well.

[@brentbarnes5802]

I love when you guys play music now it's a lot better than the old show used to be

[@gregorysuddeth581]

Never a dull moment with you guys.

[@martineetrichardsalmon3437]

Super la suite 🎉🎉❤

[@BigBoxDodge2020]

I really like this Volkswagen Radical Custom you're making so far. It turns out as cool as I hope it and know it will. This should be a Matchbox Car.

[@Michael-oo7tv]

I feel invalided ... I just woke up and the coffee(the first of many), has not kicked in yet. Same time as I am in Orange, CA. BTW... I once had a 63 MG-Midget - great lil car - ANYWAY, I took the engine out one night - literally stripped and cleaned it BUT after hours upon hours of work when it was ALL back together I too found a nut... a single nut... on the garage floor. I never did figure out where it went or came from. I was guessing from a bolt? But the car ran great and eventually I stopped looking for it's proper home. OH YEAH this happened WAY BACK IN THE DAY (1973 ish). So see it happens!!!

[@SJR1PRODUCTIONS]

Hey Ian & Jamie, I like the way doors push out and up! My only concern is the metal on metal slide tubing. With all the wind and sand in the desert, I'm afraid the grease inside the tubes would become liquid sandpaper! There must be some way to polish the inside tube and insert Delrin or teflon strips into the outer tube to reduce drag. Or even better use roller bearings as guides to hold the inner tube centered. Just my two Cents. Great Video Jamie and the soundtrack is pretty cool too👌

[@stevefamfive]

Surf music always works when working on the VW, Jamie. Great choice on your part. I can almost hear the surf!

[@henrygiann9735]

Great that your back onto the Bug... I've got the Fever... Ian... You really really gotta telescope the door outward sliders the other way around... In other words the larger tube to be inside the car fixed (like an axle and diff housing) and the smaller tube to slide out with bushings to prevent the binding you get when actuating the door... also to contain the grease from being exposed... Again, just a thought... Keep the Sunny Side Up...

[@user-Rich-1969]

Love all the Music you put into the video Jamie...

[@RichardBerry-v5i]

That's awesome looks great 👍

[@KayakCampingOffGrid]

Oh that Luv Bug is looking awesome ❤❤. The music montage is great Jamie ❤❤! Great mother father's Day car show! 😂🎉

[@SteveYankovich]

The musical montage is great, the door fab is going great

[@JohannFolscher]

Your music is awesome!! Fantastic variety. Thanks!

[@101scetch]

Well, Ian! You have done it again. Absolutely blown my mind. I was waiting to see what you were going to do with the front bottom corners of those doors and now I know. LOL. This bug is going to look absolutely gorgeous by the time you are finished. I didn’t see the caddy anywhere, I did see the Dune buggy, the zephyr and the Jeep but no Caddy. I take it that was parked somewhere else. LOL. Thanks once again for another great video and I look forward to the next one. Please take care of yourselves and blessings to both of you from the UK.

[@billtruett8593]

You two make a great team !!! love the music Jamie(Happy Mother’s Day)by the way. Ian is like watching a modern day Auguste Rodin. (The thinker) with his sculptures.👽👽🌵🛸🛸

[@kennethhardman6427]

I am late to suggest this, but I know Ian can change anything at any time. As the car is so low to get in and out of, you may want to consider modifying the doors to be like the Ford GT40, where part of the top of the car is part if the door. They could still open the same way, but an open top would be easier to get in and out of. Of course, you would need a lot of structure added to the remaining car top, but that's not anything Ian couldn't handle. Just my 2 cents. Great build!

[@LeonardMagnusson]

thank you two for the show.

[@paulhoarau1179]

J'adore ton humour ! Pour la 43 part, tu prends la tronçonneuse, tu découpes le toit et le transforme en coccinelle 🐞

[@brucemiller8389]

Looking good! A La proclaimed.

[@rodneycampbell-kk1yt]

Love the music montage

[@kevinlucas8437]

Looking good. I can't wait for actual working hydraulics !!!

[@charleslawrence7194]

Love it, love it, love it. But I admire anything VW. Jamie, you always do a great job with the music bed and editing.