1938 Kustom Cadillac: Ian Roussel Comes Up With A Final Hinge Design For The Rear DeckLid

1938 Kustom Cadillac: Ian Roussel Comes Up With A Final Hinge Design For The Rear DeckLid
Ian learned on the last episode that his hinge design wasn't working. He came up with a new design and now the deck lid is on it's way to completion. Ian Roussel comes up with all kinds of ideas in his Full Custom Garage.
We Have MERCH!
roussels-custo...
F YOU ENJOYED THIS CONTENT 👽👽
🛸SUBSCRIBE
🛸LIKE
🛸COMMENT
🛸SHARE
🛸SET YOUR NOTIFICATIONS SO YOU DO NOT MISS ANY NEW CONTENT
If you are interested in the window frames or other metal castings feel free to reach out to Rick @ 209-704-2610 Support Artists!
Here are a few videos from Victor's showroom of art/cars that he and Ian collaborated on.
• Exploring his Insane C...
• Full Custom Ian Rousse...
• Full Custom Ian Rousse...
• Ian Roussel SEMA Show ...
Music:
slip.stream/tr...
slip.stream/tr...
slip.stream/tr...
slip.stream/tr...
Follow Ian and Jamie on Instagram👽👽
@Full_Custom_Ian
@mrs_roussel_
Our Address📪
I.R. (For Large Packages 📦 Make It Out to Mojave Post Office #122)
PO Box 122
Mojave California 93502
We also have an Amazon store for you to shop some of the basics we use at our desert ranch!
www.amazon.com...
👩🏻‍🎨Follow Our Artist Who Created Our Hot Rod UFO Design on Instagram
@thechookyhand
👨🏻‍🎨Intro and Outro Animation Done By The One and Only
@corvette.mike on Instagram
Build: Ian Roussel
Filmed, Edited and Produced by Jamie Roussel
cadillac full custom garage classiccars california car show custom garage full custom garage ian roussel full custom garage season 1 full custom garage season 2 full custom garage season 3 full custom garage season 4 full custom garage season 5 full custom garage season 6 full custom garage season 7 full custom garage season 8 full custom garage season 9

[@fullcustomIan]

We are BACK! Jamie took a much needed week off with the Midwest family and Ian cleaned his shop! We also have merch for sale now! roussels-custom-fabrication.myshopify.com/. Remember to drop us a LIKE, A COMMENT and be sure to check if you are SUBSCRIBED! See everyone on FRIDAY! Back to work we go! ~ The Roussels

[@rickdaystar477]

Hey creative minds need time off too! Even Leonardo Davinci took a few days off painting the Sistine Chapel to go bowling with the guys once in awhile. LOL 👍

[@davidohler5611]

Glad to see you back -Sounds like some nice stuff went on for the week. Very frustrating that you tube keeps unsubscribing me and others. I think it’s a way to reduce your subscription level. Anyway sure glad to see you back.

[@davidohler5611]

Really enjoy how innovative you are Ian and that you keep it real. Thanks for the adventures you both take us on.

[@alisasharon1626]

Hope you guys enjoyed your time off

[@Daniel-ic5zj]

Hey guys! Welcome back!

[@Luissanchezisunza]

At least 100K of us were missing you guys, and we're all glad to see you back on the air. Love your videos.❤❤

[@fullcustomIan]

Thank you so much!!

[@JohnDymowski]

As an Artist; Architect and retired Civil Engineer from NYC. My Dad and I built ground up over a dozen cars when their was NO Money in it we did it for the love of it back in the 70’s and 80’s. Love watching your work process; however, I have to say for the first time I knew you were in trouble with that trunk door! We always learn from our mistakes touché for sharing with the viewers. It make your show REAL!

[@fullcustomIan]

Thank you!

[@drrick8839]

That was nearly unbearably fantastic! When Ian open that lid with the new hinge mechanism I felt like it was a personal victory for me! And all I had to do was charge up my iPad. Jamie, your production values are exploding every episode. You must be taking classes or cheating. The way you present Ian and his genius really draws the viewer in. It seems like every moment has value. There’s just no waste or filler. It’s eminently watchable. Much thanks, love and peace to both of you my friends. DrRick

[@fullcustomIan]

Wow! Thank you! We really enjoy making them together 😎😎

[@mesasavage]

Totally.

[@jwatkins9520]

My new favorite binge youtube channel. A 4xl shirt. How big a boy are you Ian? I'm 6'5" 255lbs and I wear a 2xl.. 😆

[@edwardfabela2200]

Ian I love your process. I like your interaction with Jamie, it's fun. All the best.

[@fullcustomIan]

Thank you!

[@duaneayers6117]

I couldn't imagine how many times this trunk lid design has gone through Ian's brain. Even while he's dreaming. It all looks great 👍

[@bobglaid3737]

I love the studio audience Jamie. 😊

[@ralphy101112]

It was great to visit again today. Ian thinks outside the box and it works out. Jamie wondering what angle to film from and hitting it spot on. The lid could hinge at any bearing of the compass and be cool. Artists truly live here.

[@fullcustomIan]

This is true...I constantly think of which angle to get the best view of his work. We appreciate you! ~ Jamie

[@SirWilliamHorne]

Welcome back Jamie you were missed by all of us! Ian you’ve done it again, that lid is super boss!

[@paulsanders1373]

Ian‘s work never ceases to amaze me… another great video!

[@pauldoucher1833]

Ian, you see things the rest of us don't. The hinges were fantastic. Much fun to watch.

[@markmilostan2493]

I think you jar his creative energy. I think he would have freaked seeing what you did as a Trauma Nurse. He is Trauma to the metal as you were to humans. You're a match. Love you both.

[@dougpeak7591]

I really enjoy watching and learning from you show. You talent is unlike anyone else. I don’t see anybody else building cars or customizing items in close to what you do. You sir are a sheet metal wizard and I really appreciate your skills

[@Marky-j3o]

You are by far a Great INSPIRATION! when i want to get motivated i always watch you to get me going, THANK YOU !

[@DairyAirGunners]

I'm looking forward to the new TV episodes coming next month.

[@Mgreen0104]

I must agree with Clifford. Your videos are like a great sitcom! Wish it was longer. I learn so much watching your filming and Ian’s brilliant Craftsmanship of Metal! Pure Art!

[@rickwalling1148]

The rear deck lid is just THERE! Serves no usefulness or function but shows the craftsmanship of the builder! Great job

[@charleseichner]

Mind blowing. Can't tell you how much i love the show.. THANK YOU.

[@kens5197]

Show of hands how many people yelled at their tv “hey you are putting the hinge on wrong end”

[@dough5626]

Perfect setup for the hinge, little refining and you are Golden Great work. Both of you....

[@thefrydaddy1]

Absolutely Love This!! And I really think the traditional opening trunk lid was a great idea! ✌️❤️

[@edwardswain2262]

Ian is a true craftsman, unlike some of the other car butchers on you tube in Canada

[@CharlesCox-p1h]

That reminds me of a old school model car hood hinge, nicely done 👍

[@michaelalberson126]

I am so amazed at how you’re seeing things ahead work out almost each and every time and most of it looks like it was by the seat of your pants however it isn’t but it is because you are able to see things how they are supposed to be so far in advanced ! ! ! ! 💨 !

[@danp5286]

So good to see Victor is in your videos you both bounce great ideas of each other to create magic.

[@AntiqueAutoSmith]

When Victor comes back and sees it, ask him "How you like your Vector Victor?" LOL! Nice job, you nailed it again man!

[@rickwilliams9277]

I like the way you guys just are. Having some fun at fabricating, I used to build to lot of stuff and haven't fun in the shop as it's so much better. It just makes things go faster and easi. Want to get a set of those goggle, muffs are Muff goggles or whatever they are. They are so cool looking for. Practicality.

[@arthursilva6140]

Hi Ian and Jamie. Another great episode. I really enjoy watching Ian's thought process while working on these crazy vehicles. Keep doing what you're doing and we'll keep watching 👍

[@fullcustomIan]

Glad you enjoyed it

[@soundsolutions]

Glad you made the change to a G type Ian. This is exactly what I suggested when 1st hinge failed. Well done brotherman.

[@dave-uf8ir]

Excellent guys was all over the place but it evolved cheers 🥂 😊

[@user-xm9ie3fm2s]

it was nice to meet you at the Lodi pinball festival. hope you two had fun.

[@douglaswallace9770]

Thank you Ian and Jamie for another fantastic episode 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@rixkafer56]

Lodi rocks ! You two were right around the corner from me !🐸👍love the lid traditional

[@dnjones3685]

Live studio audience. That was great

[@terryscanlon56]

Hi guys welcome back, been missing your program😎👍⚙️🔧

[@fullcustomIan]

Hello!!!! We took a little time off, but we are back!

[@dcbgny7963]

WOW!! He got mad skills in metal fabrication

[@kevinlucas8437]

I live on Cape Cod, and we get more rain now than Seattle 😮 this build is so exciting because I never know where you're going !!! Outstanding !!

[@brentbarnes5802]

Oh man thank God . We are so blessed to have to back. I have been listening with out your shows. I hope all is well with all the family. And so happy your back on the air.

[@taurota1554]

Outstanding and awesome as always.Thanks for sharing and taking us along

[@rickerwill2]

Perfect drum roll and cheer from the crowd!

[@CliffordUusma]

Why don’t you guy do. But longer show would love to see 50 minutes thanks

[@fullcustomIan]

We are planning longer ones this week..The hinge was kind of simple and hard to stretch out for time.

[@MrT01582]

Loving the work .....Great seeing Ian clean up too 🇬🇧🇬🇧🇬🇧

[@CliffordUusma]

Thanks for answering the question it awesome you them so fast love the show

[@vik5995]

What about the latch from a VW bug for the jam.

[@derekwalters6132]

I know Victor wants something unique and oddball, but there is something to be said for the tried and true approach. The circular trunk lid is unique enough, and the back end has a Batmobile feel to it I’m really looking forward to it being “COMPLETED” had to toss that in, the pot needed a stir LOL

[@morrydodd6211]

All I'll respect that you guys as a couple do this. Soo much I reckon yous edit between yourselves, so again..I fully respect how you get together to spend time, and make these vids!!😅 It must be hard sometimes....❤

[@DonTrishLayne]

I was starting to have withdraws glad y'all are back sensei.

[@roymazac2532]

Looks like you are enjoying your time. Keep having fun with it. Thanks for sharing

[@KeithRutledge-t1w]

Ian and Jamie...another stellar video from you both. You had me lost a little on your design , but I had the FAITH ! I am still pulling for a spare tire well in the front fender ! Lol lol lol Thank you both !!

[@robertbennett9243]

That's a pretty cool design for the hinge. Looks good.

[@rickm5806]

Perfection! My ol' grandpappy used to tell me. "when yer good, it's hard ta hide. But when yer not, it's even harder". Yer good!

[@randybryant9936]

Top hinge was a good move

[@JohnnyJalopyArt]

super EP!!!!! hey thanks for the shout out we need to get that art a going for ya! looking forward to the Collab!

[@fullcustomIan]

Yessss! Can’t wait! Talk to you soon!

[@waynesinclair9746]

Jamie has fantastic taste in music. 50s to 70s, can't go wrong

[@honestpat7789]

This is better than the doors on the bug. Simple and effective but also poetry.

[@normanbrown829]

Man he’s fantastic and for a Aussie to say that it’s fantastic

[@KayakCampingOffGrid]

Yay... The lid is a success. I flipped my lid, just seeing the finished product work out! 😅😅😅

[@albertdehn8381]

Thanks for sharing 👍😀

[@johnhart125]

Worked very well, bit of genius actually, never cease to teach me new stuff! Love talk between you two, very cool channel to watch!

[@denniswillie949]

Looks good and functional I’d say you knocked it out of the park, good job!

[@mrwolsy3696]

I loved the goldwing trike from ages ago.

[@fullcustomIan]

Yes!

[@davefenton102]

Loved the music. Loved the applause. Loved the work. Nice one.

[@jamesrankin9833]

Glad you’re all back! Much needed time off. The deck lid is perfect! Victor needs to put a giant Pearl, then it can look like clam shell opening up! 👌🏻 Good stuff!

[@ellertorresiii1081]

# 2 it is. You don’t have to go to # 3. It looks marvelous Mr. Ian. Job well done. Hello Ms. Jamie. Retired from Pahrump Nevada

[@markwells3759]

Glad you’re back! I love how you get things done! Now, can we get some things done on the Lincoln and cab over? Please!

[@franciscovillarreal5476]

I was cheering for you Ian, saw the relief and excitement in your eyes when it opened up. Fn, great job!!!

[@PhiddyPford]

I love watching as I manipulate images, and redoing is every day real. The production content has really been growing so nicely, but when a nurse is in charge, it gets done! Love you both, now gotta wait on my new hat!

[@davegallucci9327]

It's like a submarine hatch! Cool 😊

[@royfrye2871]

I absolutely love pinball. Have since the first one I played in a bar when I was maybe 9 yes old in the early 70s and how they have evolved and progressed there are some really amazing ones now👍🔥

[@patsquach4080]

Oooooo. Cool. I. Mentioned using a J hinge. And it looks like it worked out. AWSOME !!

[@ephjay6t87]

Im digging the whole thing. Ian's lone show adds contrast. Jamie's love for him shows when they work together. Both are getting the best out of life. Ill happily watch lone Ian.

[@bjbyrd6194]

Glad you guys had some time to be out of the public eye, glad to see you guys back also!

[@guymichaels3233]

Excellent camera work and production value.

[@craigbrown-sj3xs]

I was going to ask about the shirt... I like the "tall" option for those of us with larger torsos... 3x is like 2XLT, but depends on the shirt manufacturer

[@fullcustomIan]

I will have talk available in all designs soon! 😎

[@MrAussieCrasher]

Great video guys , side opening would have been so radical and cool but you went the safe way 👍

[@charleslawrence7194]

Well, that goes to show I don't have any imagination. I really thought you would open from the side. Super looking ride so far.👍👍👍

[@jeremyconway5793]

Love your work Ian.I could hear your brain grinding gears for a split second.Once again he sticks to the plan with a variety of plans of attack & once again he nails it..greetings from sth Australia 🇦🇺 my fellow earthlings.❤🐨🦘🐪🪃🚗🤘

[@HeavyMetalLuggage]

That’s a much better hinge design. Nice work!

[@MidCalMark559]

Pretty dang cool... Great approach. Great plan.

[@jpgolan1944]

Great solution! Finally it makes sense 😊

[@jimwhittemore1610]

Looking good and glad it opens up not down

[@vinceromano8245]

Ingenious hinge design.

[@davidohler5611]

Outstanding work on the trunk - very cool

[@tomtruesdale6901]

The whole time Ian was fabing that hinge I was thinking "he is making it backwards" until you welded it to the car and danged if it was not perfect! Great job Ian and Jamie.

[@orlinchirinos1981]

I like the round opening and the hinge to open it

[@jeffstephens7958]

I'm glad y'all are back I need my full custom fix

[@MichaelMaxim-ft5sv]

Great show that car is going to be something special...thanks Jamie and have a great vacation

[@donaldjones7058]

Great job on the trunk henges I am impressed

[@bobbyburns9122]

I was watching you weld the hinges on, and I thought, that's the wrong end..lol. Then you caught it and turned it around..lol. Good job on the hinges!

[@martinlicht1969]

Awesome 👌❤ That's a Hinge! Love that square tube bender! You hit a home run as usual!

[@eziotaddeo1726]

Hey guys welcome back, like other comments missed you. Jaimee have a good holiday with the filks, Ian batchin' no chance of mischief, We will keep you company in the shop, we need content Yehhhh!!! Love you guys

[@tintat2]

too fun---when you opened the trunk lid I made air motor noises!! You two are the Best!!

[@archiebald9500]

Beautiful job!

[@Busdathead]

Encore , encore as always another fantastic job by Ian the artist

[@user-tl2xh5ft3s]

please add more custom shirt designs and diffrent colors "like the shirt ians wearing in this episode" and bumper stickers to your merch store . very much would like to have ians car masterpieces designed on a shirt or coffee mug . love the show thank you

[@fullcustomIan]

Working on it!

[@Opigoink]

Great job Ian. Pretty pretty smart....keep the videos coming

[@101scetch]

Hi Ian. Another fantastic video from yourself and your lovely wife. I always look forward to watching your builds and your videos. Thanks again for another great video. Please take care of yourselves and blessings to both of you from the UK. 🇬🇧

[@davidgillard4995]

Wish I could get some of your merch but the postage to Australia is a killer.

[@fullcustomIan]

It is. Sorry!

[@MorleyRigged]

whew I had just finished re-watching all FULL CUSTOM and needed a fix. 😌

[@fullcustomIan]

Hope you enjoyed it!

[@40momba]

👽👽👽Wish ya kids would have had time to drop in to the Little Hot-Shop & pick up some Glass! Maybe next visit to Illinois, George The GlassMan!👽👽👽

[@6772Tony]

Another amazing concept in action. Kuddos Sir.

[@vwcoco]

Perfect Ian 👍 thanks for sharing Jamie

[@MichaelLawrence-v6v]

Chanel get’s a little better every time liked your music on this one😉

[@ricksimmons347]

Hi Jamie this is Rick look for you guys at Santa Maria custom show but Victor said you guys probably needed some time off that’s wonderful glad you got it. Anyway I live in a cave I don’t get Facebook or Instagram or any of those and no I don’t know where to send a gift to you so if you could let me know what the shipping address would be I will get it out to you soon. God bless your trip to go see your family and God bless him for what he stays behind and takes care of we look forward to seeing more of you guys keep up the great work we love it Rick